Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Nidec Copal Electronics' CJS-1200TB slide switch offers 200 cycles electrical life, SPDT switch function, and 2.5" body width. With waterproof sealing and gold terminal finish, it is ideal for applications requiring a latched slide switch with a max operating force of 5.9N in temperatures ranging from -40°C to 85°C.
Median Price
$0.886
Lifecycle Status
Suppliers In-Stock
18
In-Stock Inventory
1k+
RS Americas
1+ parts
$0.574
100+ parts
$0.448
1k+ parts
$0.356
10k+ parts
-
Element14
$0.863
$0.626
$0.549
$0.526
DigiKey
$0.910
$0.647
$0.566
Mouser Electronics
$0.528
$0.475
Farnell
$0.919
$0.719
Newark
$0.990
$0.726
$0.645
Chip1Stop
$0.666
$0.573
$0.506
Avnet
$0.490
$0.416
Nova Conductors
TME
$0.840
$0.606
$0.581
IBS Electronics
$0.438
$0.395
Vyrian
NAC Semi
$0.658
$0.608
Bristol Electronics
Atlantic Semiconductor
LIBRA Elektronik GmbH
AGACORP
Component Sense
Argo Parts USA
$0.628
Netroflash
$0.615
$0.602
Allen Electronics Distributors
$0.650
$0.620
Component Stockers USA
$0.930
$0.720
$0.560
$0.520
Advanced Electronics
$1.809
$1.718
Aztec Data Supply Inc.
$4.023
Neutron USA
$20.720
Eastek
$0.465
GreenTree Electronics
$0.442
Perfect Parts
Abacus Technologies
Continental Prestige Electronics
$0.766
Kepictronics
SIE Connect GmbH (Excess)
This slide switch has a long electrical life, making it durable and reliable for frequent use.
The compact size of this slide switch allows for easy integration into a variety of electronic devices.
The water-proof sealing of this slide switch ensures protection against moisture and environmental elements.
The single pole double throw function of this slide switch provides versatility in controlling electronic circuits.
This slide switch can operate in high temperature environments, increasing its usability in different applications.
The wide operating temperature range of this slide switch allows for use in extreme cold conditions.
The gold terminal finish ensures good electrical conductivity and corrosion resistance.
With a maximum DC contact voltage of 6V, this slide switch is suitable for low voltage applications.
The slide switch design offers easy manual operation for switching circuits on and off.
The compact body size of this slide switch makes it suitable for space-constrained applications.
The low operating force required for this slide switch ensures ease of use and less strain on the user.
This slide switch can handle a maximum DC contact current of 0.1A, suitable for low power circuit applications.
The latched switch action of this slide switch locks the position in place, providing stable and secure operation.
The solder termination type allows for easy and secure connection of the slide switch to circuit boards.
The surface mount straight mounting feature of this slide switch simplifies the installation process in electronic devices.
Slide Switches CJS-1200TB attributes and parameters. Explore more Slide Switches devices from Nidec Copal Electronics
Body Width:
Body Height:
Body Length/Diameter:
Maximum DC Contact Current:
DC Maximum Rating R Load (Contact):
Maximum DC Contact Voltage:
Electrical Life:
JESD-609 Code:
Mounting Feature:
Maximum Operating Force:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Sealing:
Switch Action:
Switch Function:
Switch Type:
Terminal Finish:
Termination Type:
CJS-1200TB Switches trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.50.90.50
SB
PCN Packaging - Mult Dev Reel Color Chg 30/Jan/2019
NIDEC COMPONENTS is a professional group that has over 50 years of experience and technical expertise as an electronics component manufacture which covers fields from industrial equipment to consumer electronics. Our business domain extends to each field in electronic & mechanical components, sensors and actuators. We have won praise and top market shares in each category of industrial machinery. Behind our strong track record is our entrepreneurial spirit that we have inherited since our founding as part of our DNA. Our stance of constantly seeking the next point of view, the next technology and the next value, as well as taking up challenges together with our customers, remains unchanged. In the future, we will continue to produce one after another highly value-added products that meet the needs of the times and we will contribute to the manufacturing of our customers, as well as a prosperous future for people and society which is linked to that.
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Won-top Electronics
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
AT90CAN128-16AU
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
4021.0512
Marquardt
Marquardt 4021.0512 is a DPDT slide switch with 16.5" body width, 11.5mm height, and 26.2mm length/diameter. It has a max AC contact current of 10A@250VAC, suitable for panel mount applications requiring latched switch action with solder termination type.
1437579-6
TE Connectivity
TE Connectivity's 1437579-6 is a black slide switch with SPDT function and extended side type actuator. It has an electrical life of 60000 cycles and can handle a max AC contact current of 0.4A. This slide switch is commonly used in panel mount applications where latched switch action is required.
1825204-3
TE Connectivity 1825204-3 is a black slide switch with 15000 cycles electrical life. Featuring 4P4T switch function, it has a body width of 9.35 inch and sealing with epoxy terminal seal. Ideal for panel mount applications, this switch operates b/w -20 to 85 °C with 0.3A max AC/DC contact current at 125VAC voltage rating.
ES23MCBE
C & K Components
SLIDE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: DPDT; Contact Function: ON-OFF-ON; Body Height: 9.14 mm; Insulation Resistance: 1000000000 ohm;
TG36W000000
Apem Components
TG36W000000 by Apem Components is a SPDT slide switch with a body width of 9.6 inch and a body height of 5 mm. It has a max operating temperature of 85 °C and can handle a DC max power rating of 0.4VA@20VDC. This switch is commonly used in electronic devices for its reliability and durability.
SE1DGPC04
TE Connectivity's SE1DGPC04 is a YELLOW slide switch with SPDT function. It has a max AC contact current of 0.4A and DC contact voltage of 20V, suitable for panel mounting applications in electronics requiring ON-ON contact function.
AYZ0202AGRLC
SLIDE SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: DPDT; Type (Actuator): SLIDE; Contact Function: ON-ON; Housing Material: GLASS FILLED NYLON;
A9S22-0011
Omron
SLIDE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: DPDT; Electrical Life: 50000 Cycle(s); Maximum AC Contact Current: .05 A; Packing Method: BAG;
1101M2S3V3BE2
SLIDE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): HIGH TYPE; Solderability: MIL-STD; Body Width: 7.92 inch;
NK236
NK236 by Apem Components is a SPDT slide switch with 2000 cycles electrical life. Featuring gold over nickel plating, it has an insulation resistance of 10Gohm and operates at temperatures from -40 to 85°C. Ideal for applications requiring a latched ON-ON contact function, this switch has a max AC/DC contact current of 0.5A@12V and flush type actuator design for through-hole mounting on PCBs.
JS102011SAQN
JS102011SAQN by C & K Components is a black slide switch with nylon housing and brass terminals. It has SPDT switch function, 5000 cycles electrical life, and 100000000 ohm insulation resistance. Ideal for applications requiring a latched slide switch with 0.3A@6VDC DC max rating.
AS12AH
Nkk Switches
AS12AH slide switch by Nkk Switches features SPDT switch function, 50000 cycles electrical life, and 0.4VA@28VDC DC max power rating. Ideal for applications requiring a reliable ON-ON contact function in electronic devices with a temperature range of -10 to 85°C.
MS12ANW03
MS12ANW03 by Nkk Switches is a slide switch with a stainless steel housing and copper alloy terminals. It has an electrical life of 25000 cycles and insulation resistance of 1000000000 ohm. This switch is commonly used in applications requiring ON-ON contact function, such as electronic devices or industrial equipment.
25339NLD
25339NLD slide switch by Apem Components features a glass-filled nylon housing, brass terminals, and gold plating. With SPDT switch function and ON-OFF-ON contact function, it is ideal for applications requiring a latched switch action. Operating b/w -40°C to 85°C, this slide switch has a DC rating of 0.1A at 30VDC and offers high insulation resistance of 1Gohm.
STS1300PC
Tyco Electronics Alcoswitch
SLIDE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SP3T; Type (Actuator): TOP TYPE; Body Length/Diameter: 15.5 mm; JESD-609 Code: e4;
1825257-1
SLIDE SWITCH; Mounting Feature: THROUGH HOLE-STRAIGHT; Switch Function: SPDT; Type (Actuator): EXTENDED TOP TYPE; Minimum Operating Temperature: -20 Cel; Termination Type: SOLDER;
09.03201.02
Eao
Eao's 09.03201.02 Slide Switch features a RED actuator, CHANGE-OVER switch function, and GOLD OVER NICKEL plating. With an electrical life of 1000 cycles, it is ideal for applications requiring a latched switch action and a max DC contact voltage of 12V. This through-hole straight mounting switch operates b/w -40°C to 85°C with a contact resistance of 22 mΩ.
JS102011JCQN
JS102011JCQN by C & K Components is a SPDT slide switch with 5000 cycles electrical life. It has a body width of 3.6 inch and height of 3.6 mm, suitable for applications requiring latched switch action. With a max DC contact voltage of 6V and current rating of 0.3A, it is ideal for surface mount-straight mounting in various electronic devices.
CMS-4202C
Nidec Copal Electronics
SLIDE SWITCH; Terminal Finish: Gold (Au); JESD-609 Code: e4;
ES23MABE
SLIDE SWITCH; Mounting Feature: THROUGH HOLE-RIGHT ANGLE; Switch Function: DPDT; Type (Actuator): SLIDE; Contact Function: ON-OFF-ON; Solderability: MIL-STD;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CJS-1200TA
CJS-1200TA by Nidec Copal Electronics is a waterproof slide switch with SPDT function. It has an electrical life of 200 cycles, max DC contact voltage of 6V, and operates b/w -40°C to 85°C. Ideal for surface mount applications requiring a latched switch with gold terminal finish.
CJS-1200TA1
SLIDE SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPDT; Electrical Life: 200 Cycle(s); Body Length/Diameter: 5.4 mm; Maximum Operating Force: 5.9 N;
CJS-1200TA2
SLIDE SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPDT; Minimum Operating Temperature: -40 Cel; Maximum DC Contact Current: .1 A; Body Width: 2.5 inch;
CJS-1200TB1
SLIDE SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPDT; Electrical Life: 200 Cycle(s); Switch Action: LATCHED; Maximum DC Contact Current: .1 A;
CJS-1200A
SLIDE SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPDT; Minimum Operating Temperature: -40 Cel; Packing Method: BAG; Body Width: 2.5 inch;
CJS-1200A1
SLIDE SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPDT; Body Height: 2.4 mm; Termination Type: SOLDER; Body Length/Diameter: 5.4 mm;
CJS-1200B2
SLIDE SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPDT; Sealing: TAPE SEALED; JESD-609 Code: e4; Body Height: 2.4 mm;
CJS-1200B
SLIDE SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPDT; Body Length/Diameter: 5.4 mm; Body Width: 2.5 inch; Maximum DC Contact Voltage: 6 V;
CJS-1200B1
The Nidec Copal Electronics CJS-1200B1 is a SPDT slide switch with 200 cycles electrical life. It has a body width of 2.5" and operates b/w -40°C to 85°C. Ideal for applications requiring a max DC contact voltage of 6V, such as consumer electronics and industrial control systems.
CJS-1200TB2
SLIDE SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPDT; Packing Method: TAPE AND REEL; Maximum DC Contact Voltage: 6 V; DC Maximum Rating R Load (Contact): .1A@6VDC;
CJS-1200A2
SLIDE SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPDT; Maximum DC Contact Current: .1 A; Maximum Operating Force: 5.9 N; Maximum Operating Temperature: 85 Cel;
CJS-1201TB
SLIDE SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPDT; Sealing: TAPE SEALED; WATER PROOF; Maximum DC Contact Current: .1 A; Body Height: 2.4 mm;
CJS-1201TB1
SLIDE SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPDT; Body Height: 2.4 mm; Electrical Life: 200 Cycle(s); Maximum Operating Temperature: 85 Cel;
CJS-1201A1
SLIDE SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPDT; Body Height: 2.4 mm; Maximum DC Contact Voltage: 6 V; JESD-609 Code: e4;
CJS-1201B
CJS-1201B by Nidec Copal Electronics is a slide switch with SPDT function, 2.5" body width, and waterproof sealing. It has an electrical life of 200 cycles and operates b/w -40°C to 85°C. Ideal for applications requiring a latched slide switch with gold terminal finish, such as in surface mount straight mounting configurations.
CJS-1201TA
CJS-1201TA by Nidec Copal Electronics is a waterproof slide switch with SPDT function. It has an electrical life of 200 cycles, operates b/w -40°C to 85°C, and can handle a max DC contact voltage of 6V. Ideal for surface mount applications requiring a latched switch action.
CJS-1201A2
SLIDE SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPDT; Maximum Operating Force: 5.9 N; Maximum DC Contact Current: .1 A; Body Height: 2.4 mm;
CJS-1201A
SLIDE SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPDT; Sealing: TAPE SEALED; WATER PROOF; Body Height: 2.4 mm; Termination Type: SOLDER;
CJS-1201B2
SLIDE SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPDT; Minimum Operating Temperature: -40 Cel; Switch Action: LATCHED; DC Maximum Rating R Load (Contact): .1A@6VDC;
CJS-1201TA2
SLIDE SWITCH; Mounting Feature: SURFACE MOUNT-STRAIGHT; Switch Function: SPDT; Maximum DC Contact Current: .1 A; Maximum DC Contact Voltage: 6 V; DC Maximum Rating R Load (Contact): .1A@6VDC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved