Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Nichicon UPM2A151MHD6TN is a 150uF, 100V aluminum electrolytic capacitor with tan delta of 0.08 and leakage current of 0.45mA. Ideal for applications requiring high ripple current (635mA) in temperatures ranging from -55°C to 105°C.
Median Price
$1.570
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$1.530
100+ parts
$0.654
1k+ parts
$0.580
10k+ parts
-
DigiKey
$1.610
$0.710
$0.553
Vyrian
Nova Conductors
Ampacity Inc.
$0.800
Authorized Procurement Solutions
Continental Prestige Electronics
Argo Parts USA
Aranea Global
Perfect Parts
Aluminum electrolytic capacitors are known for their high capacitance and high voltage ratings, making them suitable for a wide range of applications.
Low tan delta indicates low dielectric losses, ensuring efficient energy storage and discharge.
Low leakage current ensures minimal power loss and stable performance over time.
Cylindrical packages are easy to handle and mount, making installation convenient.
High ripple current rating allows the capacitor to handle rapid charge and discharge cycles effectively.
Ammo packaging provides convenient storage and transportation of the capacitors, preventing damage during handling.
Having two terminals enables easy connection to the circuit, ensuring simple integration.
Radial package style is common and offers stability during PCB assembly and soldering.
Wire terminals provide a secure connection and allow for flexibility during installation.
A 20% negative tolerance ensures that the capacitance value does not fall below a specified threshold, promoting reliability.
High maximum operating temperature allows the capacitor to withstand heat without compromising performance.
A 7.5mm terminal pitch facilitates easy mounting on the circuit board, enabling efficient circuit design.
Aluminum electrolytic capacitors offer high capacitance values and are widely used in power supply applications.
Low minimum operating temperature allows the capacitor to function in a wide range of environments.
Matte tin finish provides corrosion resistance and ensures a reliable electrical connection.
Polarized capacitors have a specific orientation for correct installation, preventing damage to the component.
Compact 18mm diameter makes the capacitor suitable for applications with space constraints.
Through-hole mounting offers secure placement on the PCB, reducing the risk of mechanical stress.
A length of 15mm provides a compact form factor, ideal for applications where space is limited.
A 20% positive tolerance ensures that the actual capacitance value meets or exceeds the specified value, ensuring accuracy.
With a capacitance of 150uF, this capacitor can store and release energy efficiently in various electronic circuits.
A high rated DC voltage of 100V allows the capacitor to handle higher voltage applications with reliability.
Fixed Capacitors UPM2A151MHD6TN attributes and parameters. Explore more Fixed Capacitors devices from Nichicon
Capacitance:
Capacitor Type:
Diameter:
Dielectric Material:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Tan Delta:
Terminal Finish:
Terminal Pitch:
Terminal Shape:
UPM2A151MHD6TN Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.22.00
SB
PCN Part Status Change - Mult Series NRND 23/Jun/2022
Over the last fifty years as society rapidly evolved, Nichicon has tirelessly worked on developing, manufacturing, and selling capacitors. At present, Nichicon is developing circuit products and composite parts by applying these technologies, and backed by our two pillars, "Capacitor Business" and "NECST Business", Nichicon is engaged in three core businesses of "Aluminum Electrolytic Capacitors", "Film Capacitors" and "Circuit Products". We continue to provide high value-added products and services to meet diverse and sophisticated needs around the world by focusing on four markets that are diversifying and accelerating with new key technologies: energy, ecology, and medical equipment; automotive and Railway-car related appliances; Home appliances and Industrial inverters; and information and Communications equipment.
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBR0520LT1G
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
MMBT2222ALT1G
Rochester Electronics
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .3 W; Maximum Collector Current (IC): .6 A;
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
M39006/220350
Cornell Dubilier Electronics
M39006/220350 by Cornell Dubilier Electronics is a TANTALUM (WET) capacitor with a capacitance of 47 uF and rated DC voltage of 50 V. It has a tan delta of 0.11, leakage current of 0.001 mA, and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in through hole mount applications.
CL10B102KB8NNNC
Samsung Electro-mechanics
CL10B102KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with a capacitance of 0.001 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for electronic devices.
C3216X7R2A105K160AA
TDK
TDK's C3216X7R2A105K160AA is a 1uF ceramic capacitor with 10% tolerance, X7R temperature coefficient, and 100V rated DC voltage. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range from -55 to 125°C.
EEE1HA4R7WR
Panasonic
Panasonic EEE1HA4R7WR is a 4.7uF aluminum electrolytic capacitor with 50V rated DC voltage, suitable for AEC-Q200 standards. It features tan delta of 0.14, leakage current of 0.003mA, and ripple current of 18mA, making it ideal for automotive applications requiring high reliability in a compact SMT package.
C2012X7R1V475K125AC
TDK C2012X7R1V475K125AC is a SMT ceramic capacitor with 4.7uF capacitance, rated at 35V URdc. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact design and stable performance in various electronic devices.
C1206C105K3RACTU
KEMET Corporation
C1206C105K3RACTU by KEMET Corporation is a ceramic capacitor with a capacitance of 1 uF and a rated DC voltage of 25 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
GMJ316BB7106KLHT
Taiyo Yuden
Taiyo Yuden GMJ316BB7106KLHT is a ceramic capacitor with 10uF capacitance, X7R temperature characteristics, and 35V rated DC voltage. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and compact 3.2mm x 1.6mm x 1.6mm dimensions.
M39006/25-0220
Vishay Intertechnology
Vishay Intertechnology's M39006/25-0220 is a TANTALUM CAPACITOR with 220uF capacitance, 30V URdc, and 324mA ripple current. It is MIL-PRF-39006/25 compliant, suitable for applications requiring high reliability in temperatures ranging from -55 to 125 °C. The polarized capacitor features a wet tantalum dielectric material and tubular package shape for through-hole mounting.
UMK105B7104KV-FR
UMK105B7104KV-FR by Taiyo Yuden is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It features X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and high reliability in various electronic circuits.
0402ZD105KAT2A
KYOCERA AVX
0402ZD105KAT2A by KYOCERA AVX is a ceramic capacitor with 1uF capacitance, 10V URdc. X5R temperature code, -55 to 85°C operating range. SMT package for surface mount applications in electronics requiring compact design and reliable performance.
04023C104KAT2A
04023C104KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.1uF capacitance, 25V URdc, X7R temp characteristics, and -55 to 125°C operating range. Ideal for compact electronic devices requiring stable capacitance in harsh environments.
C3225X7S2A475K200AB
TDK C3225X7S2A475K200AB is a ceramic capacitor with 4.7uF capacitance and 100V rated DC voltage. It has X7S temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications requiring compact size and reliable performance in various electronic devices.
CC1210KKX7R9BB106
Yageo
Yageo CC1210KKX7R9BB106 is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact rectangular package design.
GRM155R61A106ME11D
Murata Manufacturing
GRM155R61A106ME11D by Murata is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. With X5R temperature characteristics, it operates b/w -55°C to 85°C. Ideal for surface mount applications in electronics due to its compact size and wraparound terminals.
M39006/22-0639
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 86 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C0603C105K3PACTU
KEMET C0603C105K3PACTU is a 1uF ceramic capacitor with 10% tolerance, X5R temp coefficient, and 25V rated voltage. Ideal for SMT applications, it operates b/w -55°C to 85°C. Suitable for various electronic devices requiring compact and reliable capacitors.
TMK325B7226KMHP
Taiyo Yuden's TMK325B7226KMHP is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
06035C104KAT2A
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
UWT1H4R7MCL1GB
Nichicon
Nichicon UWT1H4R7MCL1GB is a 4.7uF aluminum electrolytic capacitor with 50V URdc, suitable for AEC-Q200 standards. It features low tan delta of 0.14 and leakage current of 0.003mA, ideal for automotive applications requiring high ripple current handling up to 19mA in a surface mount package style.
C0402S221K5RACTU
KEMET C0402S221K5RACTU is a ceramic capacitor with 0.00022uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size of 1x0.5x0.5mm and wraparound terminals for easy mounting in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
UPM2G4R7MHD
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 400 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
UPM2A470MPD
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
UPM2W100MHD1TN
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 450 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
UPM2A151MHD6
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 150 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
UPM2A471MHD
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 470 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
UPM2C4R7MPD1TD
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 160 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
UPM2W3R3MHD
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 3.3 uF; Rated DC Voltage (URdc): 450 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
UPM2A151MHD6AA
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 150 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Packing Method: Bulk;
UPM2A151MHD6CA
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 150 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Positive Tolerance: 20 %;
UPM2A151MHD6CC
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 150 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Polarity: POLARIZED;
UPM2A151MHD6CM
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 150 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Ripple Current (mA): 917;
UPM2A151MHD6CP
ALUMINUM ELECTROLYTIC CAPACITOR; Capacitance: 150 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET); Terminal Pitch: 7.5 mm;
UPM2A151MHD1TO
UPM2A151MHH6
UPM2A151MHH
UPM2A151MHH-TO
UPM2A151MHH6TN
UPM2A151MHT6
UPM2A151MHT
UPM2A151MHD
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved