Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NRC12F2R20TRF by Nic Components is a fixed resistor with 2.2 ohm resistance, 1% tolerance, and 0.25 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
Median Price
$0.008
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Verical
1+ parts
-
100+ parts
1k+ parts
10k+ parts
$0.010
Arrow
Chip1Stop
$0.007
Nova Conductors
$0.003
Vyrian
IBS Electronics
$0.006
Continental Prestige Electronics
Argo Parts USA
Netroflash
With a rated temperature of 70 °C, this fixed resistor can reliably operate within a moderate temperature range, making it suitable for a variety of applications.
The low resistance value of 2.2 ohm allows for efficient current flow and helps in controlling the amount of current in the circuit, making it an ideal choice for precise resistance requirements.
With a tight tolerance of 1%, this fixed resistor ensures accuracy in resistance values, which is crucial for maintaining circuit performance and stability.
The high maximum operating temperature of 155 °C ensures the resistor can withstand elevated temperatures without degradation, enhancing its reliability in demanding environments.
With a rated power dissipation of 0.25 W, this resistor can handle moderate power levels without overheating, making it suitable for various power applications.
The terminal finish of matte tin with a nickel barrier provides excellent solderability and corrosion resistance, ensuring robust electrical connections and longevity of the component.
The surface mounting type allows for easy and convenient installation on PCBs, saving space and simplifying assembly processes.
Compliance with the AEC-Q200 standard ensures that this fixed resistor meets stringent automotive industry requirements for reliability and performance, making it suitable for automotive applications.
Fixed Resistors NRC12F2R20TRF attributes and parameters. Explore more Fixed Resistors devices from Nic Components
Construction:
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Reference Standard:
Resistance:
Resistor Type:
Size Code:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
NRC12F2R20TRF Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.21.00.30
SB
8533.21.00.45
NIC Components Corp., in partnership with Nippon Industries Co. Ltd., has been manufacturing and designing passive components for over thirty seven years. By integrating design, raw materials and production expertise, NIC has established itself as a leader in passive component technology. From a core business of Aluminum Electrolytic Capacitors, NIC has expanded its product offering to Tantalum Capacitors, Ceramic Capacitors, DC Film Capacitors, Thick and Thin Film Resistive Products and a growing line of Power Inductors, Ferrite Chip Beads, and RF Components. NIC maintains engineering offices globally to oversee our production facilities and work closely with the factory sites for quality assurance and technology dissemination. Warehouse, engineering and sales offices in North America, APAC and EMEA support customer design, logistics and service requirements. NIC offers “Live Support” via our website to assist our customers in component selection and technical guidance. The NIC website offers one of the most comprehensive cross-reference databases in our industry. Technical data, including application notes, life test data, process guides and design tools offer engineers a one stop library for their passive component needs. Samples and sample kits are always available to qualified customers, the majority shipped from our extensive inventory. The major advantage you will find when engaging with NIC is our people. NIC boasts one of the most experienced and highly trained sales teams in the world averaging more than 15 years of passive components experience. Our number one priority is customer support. From technical specifications to delivery information, from quoting large bill of materials to crossing our competitors’ parts, NIC is capable of industry leading response times.
CRG0805F10R
TE Connectivity
TE Connectivity's CRG0805F10R is a 10 ohm fixed resistor with 1% tolerance and 0.125 W power dissipation. It features thick film technology, SMT package style, and matte tin over nickel terminal finish. Ideal for surface mount applications in electronics, offering a temperature coefficient of 200 ppm/°C and operating voltage of 150 V.
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
SMBJ18CA
Protek Devices
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Minimum DS Breakdown Voltage: 50 V; Maximum Operating Temperature: 150 Cel;
BAV99
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
Silicon Standard
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Taiwan Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Peak Reflow Temperature (C): 260; Maximum Operating Temperature: 175 Cel; JESD-609 Code: e3; No. of Elements: 1;
2N7002
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Style (Meter): SMALL OUTLINE; Terminal Position: DUAL;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Continental Device India
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
LM317TG
LM317TG by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max output current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount, with a rectangular shape and through-hole terminals for easy installation.
WR08X000PTL
Walsin Technology
WR08X000PTL by Walsin Technology is a fixed resistor with 0 ohm resistance, METAL GLAZE/THICK FILM tech, and SMT package style. Ideal for jumper applications in electronics, it operates b/w -55 to 155 °C and features a matte tin terminal finish.
CRCW06031K00FKTABC
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKTABC is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is ideal for surface mount applications in electronics requiring a temperature coefficient of 100 ppm/°C and operating voltage up to 75 V. The chip construction with wraparound terminals makes it suitable for compact designs where space is limited.
RESKIT1206RS
TE Connectivity's RESKIT1206RS is a 2-terminal fixed resistor with thick film technology. It has dimensions of 1mm x 0.5mm x 0.35mm and a temperature coefficient of 100 ppm/°C. With a tolerance of 5% and rated power dissipation of 0.25W, it is commonly used in electronic circuits for precise resistance applications.
CSR1206JTR270
Stackpole Electronics
CSR1206JTR270 by Stackpole Electronics is a fixed resistor with a resistance of 0.27 ohm and a tolerance of 5%. It has a max operating temperature of 155 °C and is suitable for surface mount applications.
CRCW1206100KFKEAE6
Vishay Intertechnology CRCW1206100KFKEAE6 is a 100000 ohm fixed resistor with 1% tolerance. It operates at -55 to 125 °C and has a power dissipation of 0.25 W. Ideal for surface mount applications in various electronic circuits due to its compact rectangular chip design.
RC0805FR-0720KL
Yageo
Yageo's RC0805FR-0720KL is a fixed resistor with 20000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in electronics due to its SMT package style and operating voltage of 150 V. Temperature coefficient of 100 ppm/°C ensures stable performance from -55 to 155 °C.
RCT-0C
TE Connectivity's RCT-0C is a METAL FOIL fixed resistor with 0.05 ohm resistance, suitable for SMT applications. With dimensions of 2mm x 1.25mm x 1.45mm, it operates b/w -55 to 125 °C and has a power dissipation of 0 W. Ideal for surface mounting, this WRAPAROUND terminal resistor is commonly used in electronic circuits requiring precise resistance values.
CRCW060347R0FKEAHP
Vishay Intertechnology's CRCW060347R0FKEAHP is a fixed resistor with 47 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
RC0603FR-072KL
Yageo's RC0603FR-072KL is a fixed resistor with 2000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and operating voltage of 75 V. With a temperature coefficient of 100 ppm/°C, it can operate b/w -55 °C to 155 °C efficiently.
RC0402FR-0747KL
Yageo's RC0402FR-0747KL is a fixed resistor with 47000 ohm resistance, 1% tolerance, and 0.0625 W power dissipation. Ideal for surface mount applications in electronics due to its metal glaze/thick film technology and operating voltage of 50 V. Temperature coefficient of 100 ppm/°C ensures stable performance from -55 to 155 °C.
CRCW0603220RFKEAHP
Vishay Intertechnology's CRCW0603220RFKEAHP is a fixed resistor with 220 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 °C to 155 °C efficiently.
RK73Z1JTTD
Koa Speer Electronics
RK73Z1JTTD by Koa Speer Electronics is a SMT fixed resistor with 0 ohm resistance, METAL GLAZE/THICK FILM tech, and -55 to 155 °C operating temp. Ideal for automotive (AEC-Q200) and general electronics (IEC60115-8) applications due to its compact size and wraparound terminals.
RP73PF1E1K0BTDF
TE Connectivity's RP73PF1E1K0BTDF is a thin film fixed resistor with 1000 ohm resistance, 0.1% tolerance, and 0.1 W power dissipation. It is used in surface mount applications for temperature-sensitive circuits due to its 70-155 °C operating range and low temperature coefficient of 25 ppm/°C.
CRCW0402200RFKED
Vishay Intertechnology's CRCW0402200RFKED is a 200 ohm fixed resistor with 1% tolerance and 50V operating voltage. With METAL GLAZE/THICK FILM technology, it operates b/w -55 to 155 °C, making it suitable for automotive applications meeting AEC-Q200 standard. Sized at 0402, this SMT resistor offers 0.063 W power dissipation in a compact rectangular package.
CRCW060310K0FKEC
Vishay Intertechnology's CRCW060310K0FKEC is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and has a temperature coefficient of 100 ppm/°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
MP725-100-1%
Caddock Electronics
MP725-100-1% by Caddock Electronics is a 100 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 150 °C and has a power dissipation of 25 W. Ideal for surface mount applications in various electronic circuits.
CRGCQ0603F47K
TE Connectivity's CRGCQ0603F47K is a fixed resistor with 47000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It is used in surface mount technology applications due to its compact dimensions of 1.6mm x 0.8mm x 0.45mm and operating voltage of 75V. The thick film technology and AEC-Q200 reference standard make it suitable for automotive electronics.
RC0603FR-0727KL
The Yageo RC0603FR-0727KL is a fixed resistor with a resistance of 27000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
CRCW06032K00FKEAHP
Vishay Intertechnology's CRCW06032K00FKEAHP is a fixed resistor with 2000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 75 V. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 °C to 155 °C efficiently.
RC0603JR-100RL
Yageo's RC0603JR-100RL is a SMT jumper resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Ideal for surface mount applications, it features metal glaze/thick film technology and matte tin over nickel terminal finish.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NRC10F1002TRF
Nic Components
NRC10F1002TRF by Nic Components is an 0805 SMT fixed resistor with a resistance of 10000 ohm and 1% tolerance. Operating voltage is 150V, power dissipation 0.125W, and temperature coefficient 100 ppm/°C. Ideal for automotive applications due to AEC-Q200 standard compliance.
NRC10F1651TRF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1650 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
NRC10F4700TRF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 470 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
NRC10J100TRF
NRC10J100TRF by Nic Components is an 0805 SMT fixed resistor with a resistance of 10 ohm, rated for temperatures b/w -55 to 155 °C. It has a tolerance of 5% and can operate at a voltage of up to 150 V. Ideal for automotive applications due to AEC-Q200 standard compliance.
NRC10J154TRF
NRC10J154TRF by Nic Components is an 0805 SMT fixed resistor with a resistance of 150k ohm, operating voltage of 150V, and power dissipation of 0.125W. Ideal for automotive applications due to AEC-Q200 standard compliance and temperature range from -55°C to 155°C.
NRC10J180TRF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 18 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
NRC10J184TRF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 180000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
NRC10J301TRF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 300 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
NRC10J360TRF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 36 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
NRC10J361TRF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 360 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
NRC10J564TRF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 560000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: 5 %;
NRC10F4703TRF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 470000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
NRC12F2201TRF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 2200 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
NRC10J330TRF
NRC10J330TRF by Nic Components is an 0805 SMT fixed resistor with a resistance of 33 ohm and tolerance of 5%. Operating voltage is 150V, rated power dissipation 0.125W. It's ideal for automotive applications due to AEC-Q200 compliance and temperature coefficient of 200 ppm/°C.
NRC10F3102TRF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 31000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 175 Cel; Tolerance: 1 %;
NRC10J330TR10F
NRC10J330TR10F by Nic Components is an 0805 SMT fixed resistor with a resistance of 33 ohm and 5% tolerance. It operates b/w -55 to 155 °C, suitable for automotive applications meeting AEC-Q200 standard. With a power dissipation of 0.125 W, it has a temperature coefficient of 200 ppm/°C.
NRC12F1780TRF
NRC12F1780TRF by Nic Components is a 1206 SMT fixed resistor with 178 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for automotive applications due to AEC-Q200 standard compliance and operating voltage of 200 V. Temperature range from -55 to 155 °C ensures reliable performance in various conditions.
NRC12F2R00TRF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 2 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
NRC10F1001TRF
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 1000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
NRC12F2R20TR10F
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 2.2 ohm; Rated Power Dissipation (P): .25 W; Maximum Operating Temperature: 155 Cel; Tolerance: 1 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved