Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 766; Approvals (V): UL; Maximum Operating Temperature: 70 Cel; Inductance (Primary): 5870 uH;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Pulse & Datacom Transformers 76602/9 attributes and parameters. Explore more Pulse & Datacom Transformers devices from Newport Components
Application:
Approvals (V):
Minimum ET Product:
Height:
Isolation Voltage:
Length:
Manufacturer Series:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
76602/9 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Newport Components - C and D Technologies - Murata PS Company Overview Newport Components was acquired by C&D Technologies December 2000. C&D Technologies, Inc. is a technology company that produces and markets systems for the power conversion and storage of electrical power, including industrial batteries and electronics. This specialized focus has established the company as a leading and valued supplier of products in three major categories - reserve power systems, electronic power supplies and material handling systems. C&D's success in these key markets has been supported by dedication to customer service. Approximately 70 percent of the company's current sales are reserve power systems supplied to leading operators of telecommunications, data transmission, infrastructure computer systems and utilities to enable them to maintain critical operations during power outages. The Power division of C&D Technologies was acquired by Murata Power Solutions in 2007.
2N2222A
Asi Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Sipex
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 240;
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
Gec Plessey Semiconductors
Panjit International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
L7805CV
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
261
Deltrol Controls
Other Relays;
Bytesonic Electronics
Microchip Technology
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
KSZ9031RNXIA
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
LM358MX
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TM1062TXHUANL
Inrcore
TM1062TXHUANL by Inrcore is a Datacom Transformer with 4.5uH primary inductance, 0.3ns max pulse rise time, and 1:1 turns ratio. Ideal for applications requiring surface mount transformers with a temperature range of -55 to 125°C, such as data communication systems.
H5007NLT
Pulse Specialty Components
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); No. of Functions: 1; Application: 1000 BASE-T; Packing Method: TAPE & REEL;
HX1224CNL
Pulse Electronics
HX1224CNL by Pulse Electronics is a Datacom Transformer with 4000V isolation voltage, 350uH primary inductance, and 1:1 turns ratio. It is ideal for surface mount applications in data communication and networking equipment due to its compact size and temperature range of -40°C to 85°C.
PT61018PEL
Bourns
The Bourns PT61018PEL is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1CT:1CT turns ratio. Ideal for LAN, 10/100 BASE-TX, and Ethernet applications. It operates b/w -40°C to 85°C and features surface mounting method.
ITRA-0239-D502
Schurter Ag
Schurter Ag's ITRA-0239-D502 is a Pulse Transformer with 3200V Isolation Voltage, 100ns Max Pulse Rise Time, and 2200uH Primary Inductance. Ideal for applications requiring high voltage isolation and fast pulse rise times in compact spaces.
ST7033QNL
ST7033QNL by Pulse Electronics is a Datacom Transformer with 1:1:1 Turns Ratio, 1500V Isolation Voltage, and 90uH Primary Inductance. It operates b/w 0-70°C and is ideal for surface mount applications in pulse and data communication systems.
TG110-E050N5LFTR
Halo Electronics
TG110-E050N5LFTR by Halo Electronics is a DATACOM TRANSFORMER with 1500V isolation voltage, 1CT:1CT turns ratio, and dimensions of L12.7xB7.11xH6.35 mm. Ideal for 10/100 BASE-TX applications, it operates b/w -40 to 85°C and features surface mounting method.
74215
Pico Electronics
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): MIL-PRF-21038; Terminal Finish: Tin/Lead (Sn/Pb); Isolation Voltage: 500 V; Dimensions: L13.97XB13.97XH8.38 (mm);
GST5009LF
Bothhand Usa
GST5009LF by Bothhand Usa is a DATACOM TRANSFORMER with 4 functions and 1500V isolation voltage. It has primary inductance of 350uH, suitable for 1000 BASE-T ETHERNET applications. With dimensions of L15.1XB7.1XH4.0 (mm), it operates b/w 0-70°C temperature range.
HCTSM80101AALE1
Bourns HCTSM80101AALE1 pulse transformer offers 5000V isolation voltage, 250uH inductance, and 1:1 turns ratio. Ideal for AEC-Q200 approved applications requiring high isolation and temperature range from -40 to 125°C. Suitable for surface mount with dimensions of 6.5x10.8x12.3mm, it is commonly used in datacom systems.
H6062FNL
H6062FNL by Pulse Electronics is a Datacom Transformer with 4 functions and an isolation voltage of 1500V. It has primary inductance of 350uH, operates b/w 0-70°C, and features a compact size of 5.72x15.24x17.5mm. Ideal for surface mount applications in data communication systems due to its 1:1 turns ratio and high isolation capability.
M-21038/27-05
Data Device
Data Device's M-21038/27-05 is a MIL-PRF-21038/27 approved pulse transformer with 100V isolation voltage and 150ns max pulse rise time. Measuring L12.7xB8.89xH6.35 mm, it operates b/w -55°C to 130°C. Ideal for applications requiring precise signal transmission in compact spaces.
749020100A
Wuerth Elektronik & Kg
749020100A by Wurth Elektronik is a pulse & datacom transformer with an isolation voltage of 1500V. It has a primary inductance of 350uH and dimensions of L12.7XB8.6XH3.0 (mm). This transformer is suitable for LAN applications, specifically for 10/100/1000 BASE-T networks.
SM51108PEL
Bourns SM51108PEL is a Pulse & Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1CT:1CT turns ratio. Ideal for 10/100 BASE-TX, Ethernet, and LAN applications due to its compact L12.8xB6.9xH5.65mm size and surface mounting feature. Operating temperature range from -40°C to 85°C makes it versatile for various environments.
ISRA-0239-D502
Schurter Ag's ISRA-0239-D502 is a VDE-approved pulse transformer with 3200V isolation voltage, 100ns max pulse rise time, and 2200uH primary inductance. Ideal for datacom applications, it operates b/w -25°C to 100°C, features surface mounting, and has dimensions of L22.7xB22.3xH14.0 (mm).
LP5009ANL
Link-pp Int'l Technology
LP5009ANL by Link-pp Int'l Technology is a DATACOM TRANSFORMER with dimensions L13.16xB18.59xH6.12 (mm). It operates b/w -40 to 85 °C and has a Turns Ratio of 1CT:1CT for applications in 10/100 BASE-T, ETHERNET, and LAN networks. Ideal for surface mount installations due to its compact size.
H5008NL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Matte Tin (Sn); Width: 13.64 mm; Length: 15.24 mm; Additional Features: HEIGHT DIMENSION INCLUDES TERMINAL ALSO;
100B-1003XT
100B-1003XT by Pulse Electronics is a DATACOM TRANSFORMER for 10/100 BASE-TX applications. It features an inductance of 350uH, operates b/w -55 to 125 °C, and has dimensions of L12.7xB6.73xH5.97 mm suitable for surface mount assembly in tape & reel packaging.
S558-5999-Q3-F
Bel Fuse
Bel Fuse's S558-5999-Q3-F is a Datacom Transformer with 8 functions, 350uH primary inductance, and 1CT:1CT turns ratio. Ideal for Ethernet applications, it is a surface mount transformer measuring 27.81mm x 12.19mm x 7.24mm.
M21038/27-29T
Defense Logistics Agency
M21038/27-29T by Defense Logistics Agency is a MIL-PRF-21038/27 approved pulse transformer with 100V isolation voltage. It has dimensions of L12.7xB8.89xH6.35 mm and operates b/w -55 to 130 °C. Ideal for datacom applications, it features a 1:1.79 turns ratio and through-hole mounting for easy installation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Newport Components
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved