Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 766; Approvals (V): UL; Maximum Operating Temperature: 70 Cel; No. of Functions: 1;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Pulse & Datacom Transformers 76602/5 attributes and parameters. Explore more Pulse & Datacom Transformers devices from Newport Components
Application:
Approvals (V):
Minimum ET Product:
Height:
Isolation Voltage:
Length:
Manufacturer Series:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
76602/5 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Newport Components - C and D Technologies - Murata PS Company Overview Newport Components was acquired by C&D Technologies December 2000. C&D Technologies, Inc. is a technology company that produces and markets systems for the power conversion and storage of electrical power, including industrial batteries and electronics. This specialized focus has established the company as a leading and valued supplier of products in three major categories - reserve power systems, electronic power supplies and material handling systems. C&D's success in these key markets has been supported by dedication to customer service. Approximately 70 percent of the company's current sales are reserve power systems supplied to leading operators of telecommunications, data transmission, infrastructure computer systems and utilities to enable them to maintain critical operations during power outages. The Power division of C&D Technologies was acquired by Murata Power Solutions in 2007.
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
1N4148WS
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603X104K5RACAUTO
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
C1206C104K5RACTU
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
1N4148W-T
Rectron
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
First Components International
2N7002
Plessey Semiconductors Discrete Components Div
Other Transistors;
Surge Components
100B-1003X
Pulse Electronics
100B-1003X by Pulse Electronics is a DATACOM TRANSFORMER with inductance of 350uH, suitable for 10/100 BASE-TX applications. It operates b/w -55 to 125°C, has dimensions of L12.7xB6.73xH5.97 mm, and features a turns ratio of 1:1 for surface mount assembly in TAPE & REEL packaging.
CEP99-102
Sumida
Sumida's CEP99-102 is a pulse transformer with 2 functions and an isolation voltage of 2500 V. It is used in battery management systems, operates b/w -40 to 125 °C, and has dimensions of 10mm x 9mm x 9.2mm.
HX1188NL
HX1188NL by Pulse Electronics is a Datacom Transformer with an Isolation Voltage of 1650V, Inductance of 350uH, and Turns Ratio of 1:1. It is designed for surface mount applications in data communication and networking equipment due to its compact dimensions (L12.7xB7.11xH5.97 mm) and wide operating temperature range (-40 to 85°C).
HX1198NL
HX1198NL by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and dimensions of L12.7xB7.11xH5.97 mm. Ideal for surface mount applications in data communication systems, it operates b/w -40°C to 85°C temperatures efficiently with a turns ratio of 1:1CT; 1:1CT.
96046123209
Littelfuse
POWER TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): UL; Height: 13.5 mm; No. of Functions: 2; Turns Ratio (Np:Ns): 1:1;
1024
C&d Technologies
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Dimensions: 15.06mm X 15.06mm X 15.75mm; Maximum Operating Temperature: 70 Cel;
M-21038/27-05
Data Device
Data Device's M-21038/27-05 is a MIL-PRF-21038/27 approved pulse transformer with 100V isolation voltage and 150ns max pulse rise time. Measuring L12.7xB8.89xH6.35 mm, it operates b/w -55°C to 130°C. Ideal for applications requiring precise signal transmission in compact spaces.
749013021
Wuerth Elektronik & Kg
Wuerth Elektronik & Kg 749013021 is a Pulse & Datacom Transformer with 1500V isolation voltage, 1.2dB insertion loss, and primary inductance of 350uH. Ideal for LAN applications like 100 BASE-T due to its compact dimensions of 13.64mm x 11.94mm x 6.22mm and surface mounting feature. Operating temperature range from 0°C to 70°C makes it versatile for various environments.
PT61020EL
Bourns
The Bourns PT61020EL is a DATACOM TRANSFORMER with 4 functions and 1500V isolation voltage. It has primary inductance of 350uH, suitable for LAN, 10/100/1000 BASE-T, and ETHERNET applications. With dimensions of L17.62xB12.2xH6.0 mm, it operates b/w -40 to 85°C temperature range.
HX6096NL
HX6096NL by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage, 1.2dB insertion loss, and primary inductance of 350uH. It is designed for Ethernet applications, operates b/w -40°C to 85°C, and has dimensions of L18.2xB12.2xH6.6mm for surface mount installation in UL approved systems.
M21038/27-07
Defense Logistics Agency
M21038/27-07 by Defense Logistics Agency is a MIL-PRF-21038/27 approved pulse transformer with 100V isolation voltage. It has dimensions of L12.7xB8.89xH6.35 mm and operates b/w -55°C to 130°C. This through-hole mounted transformer with a turns ratio of 1:1.41 is ideal for datacom applications requiring reliable signal transmission in compact spaces.
749010310
Wurth Elektronik 749010310 is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1:1 turns ratio. Ideal for 10/100 BASE-T applications, it operates b/w -40°C to 85°C and features surface mounting at dimensions of 12.7mm x 8.67mm x 4.25mm.
TST-9007
Beta Transformer Technology
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Maximum Operating Temperature: 130 Cel; Height: 7.11 mm; Application: GENERAL PURPOSE; Maximum Pulse Rise Time: 250 ns;
PA2009NLT
PA2009NLT by Pulse Electronics is a 3-function pulse transformer with 1500V isolation voltage and 55.5ns max pulse rise time. Ideal for gate drive applications, it operates b/w -40 to 130°C and has dimensions of L9.02xB8.64xH7.62mm for surface mount assembly in tape & reel packaging.
SM41126EL
Bourns SM41126EL is a DATACOM TRANSFORMER with 4 functions, 1500V isolation voltage, and 350uH inductance. Ideal for LAN applications, it operates b/w -40°C to 85°C temperatures and features surface mounting at a compact size of 12.7mm x 8.67mm x 4mm.
1001
Murata Manufacturing
Murata Manufacturing's 1001 is a UL-approved pulse transformer with 2000V isolation voltage, 3000uH inductance, and 200 V-us min ET product. Ideal for datacom applications, it features a compact size of 15.06mm x 15.06mm x 15.75mm and operates b/w temperatures of 0°C to 70°C.
H1164NLT
H1164NLT by Pulse Electronics is a DATACOM TRANSFORMER with 1CT:1CT Turns Ratio, 1500V Isolation Voltage, and 1dB Insertion Loss. It is designed for 10/100 BASE-TX applications, operates b/w 0-70°C, and has IEEE approval. Ideal for surface mount installations with dimensions of L28.58xB12.19xH5.84 mm.
PM-DB2791S
Holt Integrated Circuits
PM-DB2791S by Holt Integrated Circuits is a MIL-STD-1553 approved Pulse & Datacom Transformer with dimensions of L15.87xB15.87xH6.35 mm. It operates b/w -55 to 130°C, has a turns ratio of 1:2.5, and uses Tin/Lead terminal finish. Ideal for DATA BUS INTERFACE applications due to its surface mount feature and DATACOM TRANSFORMER type design.
H1260
H1260 by Pulse Electronics is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1:1 turns ratio. It is designed for 10/100 BASE-T applications, featuring surface mounting and compact dimensions of L12.7xB7.11xH6.0 mm for efficient integration in networking systems. Operating temperature ranges from 0 to 70°C, making it suitable for various environments.
M21038/27-29T
Pulse Specialty Components
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: M21038/27-29T; Application: GENERAL PURPOSE; Turns Ratio (Np:Ns): 1CT:1.79CT; Isolation Voltage: 100 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Newport Components
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved