Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 766; Approvals (V): UL; Length: 12.7 mm; Height: 6.35 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
ECAB
1+ parts
100+ parts
1k+ parts
10k+ parts
Pulse & Datacom Transformers 76601/4 attributes and parameters. Explore more Pulse & Datacom Transformers devices from Newport Components
Application:
Approvals (V):
Minimum ET Product:
Height:
Isolation Voltage:
Length:
Manufacturer Series:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Dimensions:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
76601/4 Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Newport Components - C and D Technologies - Murata PS Company Overview Newport Components was acquired by C&D Technologies December 2000. C&D Technologies, Inc. is a technology company that produces and markets systems for the power conversion and storage of electrical power, including industrial batteries and electronics. This specialized focus has established the company as a leading and valued supplier of products in three major categories - reserve power systems, electronic power supplies and material handling systems. C&D's success in these key markets has been supported by dedication to customer service. Approximately 70 percent of the company's current sales are reserve power systems supplied to leading operators of telecommunications, data transmission, infrastructure computer systems and utilities to enable them to maintain critical operations during power outages. The Power division of C&D Technologies was acquired by Murata Power Solutions in 2007.
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Bytesonic Electronics
M39029/56351
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/56351 is a CRIMP contact type backshell accessory compliant with MIL-DTL-38999. It features FEMALE gender contacts, compatible with M39029/58363 mating contacts. The insertion and removal tools required are M81969/14-10 and M22520/2-10 respectively, making it ideal for military connector applications.
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
EEAGA1H4R7
Panasonic
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
Digitron Semiconductors
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
LM107H/883C
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Package Equivalence Code: CAN8,.2;
DS18B20Z+
Maxim Integrated
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Maximum Supply Voltage: 5.5 V;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
1001C
Murata Manufacturing
1001C by Murata Manufacturing is a pulse transformer with an isolation voltage of 2000 V, inductance of 3000 uH, and min ET product of 200 V-us. It is designed for applications requiring high voltage isolation and precise signal transmission, commonly used in data communication systems and power supplies.
ITRF-0249-D101
Schurter Ag
Schurter Ag's ITRF-0249-D101 is a VDE-approved pulse transformer with 3200V isolation voltage, 50ns max pulse rise time, and 1200uH primary inductance. Ideal for datacom applications, it operates b/w -25°C to 100°C temperatures and features dimensions of L18.2xB17.8xH13.0mm for through-hole mounting.
1016C
1016C by Murata Manufacturing is a pulse transformer with an isolation voltage of 3500V, inductance of 3000uH, and min ET product of 200V-us. It is used for data communication applications requiring high voltage isolation and precise signal transmission.
SM453229-381N7Y
Bourns
Bourns SM453229-381N7Y is a Datacom Transformer with 380uH inductance, 1500V isolation voltage, and 1:1 turns ratio. Ideal for LAN applications supporting 10/100/1000 BASE-T networks. Compact at L4.7xB3.22xH2.9mm, surface mountable with -40 to 85°C operating range.
H5020NLT
Pulse Specialty Components
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: H5020; Terminal Finish: Matte Tin (Sn); Packing Method: TAPE & REEL; Application: 1000 BASE-T;
749020310
Wuerth Elektronik & Kg
Wurth Elektronik 749020310 is a Datacom Transformer with 4 functions, 1500V isolation voltage, and 350uH inductance. Ideal for LAN applications at temperatures ranging from -40 to 85°C. Compact design with dimensions of 17.53mm x 14.6mm x 4.5mm for surface mount installation.
100B-1003XNL
Pulser
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Terminal Finish: Tin (Sn); Application: 10/100 BASE-T; Minimum Operating Temperature: -55 Cel; Inductance (Primary): 350 uH;
14255R-100
Dialog Semiconductor
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; No. of Functions: 1; Length: 17 mm; Packing Method: TR, 13 INCH; Maximum Operating Temperature: 85 Cel;
ALANS100X1-1E10LT
Abracon
ALANS100X1-1E10LT by Abracon is a DATACOM TRANSFORMER with 2500V isolation voltage, 350uH inductance, and IEEE approval. Ideal for LAN, 10/100 BASE-TX, and Ethernet applications due to its compact size (5x11.7x14.8mm) and surface mounting feature. Operating temperature range from -55°C to 125°C ensures reliable performance in various environments.
1028
Newport Components
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Width: 15.06 mm; No. of Functions: 1;
ALAN-2302
ALAN-2302 by Abracon is a DATACOM TRANSFORMER with 4 functions and 1650V isolation voltage. It has primary inductance of 350uH, suitable for 100/1000 BASE-T applications. With dimensions of 5.2mm x 14.2mm x 17.5mm, it operates b/w -40°C to +85°C and features a turns ratio of 1CT:1CT for surface mount installation.
8464
Api Technologies
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; No. of Functions: 2; Height: 5.84 mm; Dimensions: L28.57XB16.26XH5.84 (mm); Width: 16.26 mm;
HX5401NL
Pulse Electronics
HX5401NL by Pulse Electronics is a Datacom Transformer with 4 functions and 1500V isolation voltage. Ideal for Ethernet applications, it operates b/w -40°C to 85°C. With dimensions of 28.45mm x 17.27mm x 11.18mm, this surface mount transformer has a turns ratio of 1:1 and is designed for data communication systems.
78250MC
78250MC by Murata Manufacturing is a Pulse & Datacom Transformer with 1500V isolation voltage, 1000uH inductance, and 50V-us min ET product. It is used for RS-232 data interface applications, operates b/w -40 to 85 °C temperatures, and features surface mounting method.
HX5008NL
HX5008NL by Pulse Electronics is a Datacom Transformer with 4 functions and 4 primary windings. It offers an isolation voltage of 1500V, insertion loss of 1dB, and inductance of 350uH. Ideal for applications like 1000BASE-T, this transformer operates b/w -40°C to 85°C with a frequency range from 1MHz to 100MHz.
DA2318-ALC
Coilcraft
Coilcraft's DA2318-ALC is a pulse transformer with 1500V isolation voltage, 680uH inductance, and 40.8 V-us min ET product. Ideal for gate drive applications, it operates b/w -40 to 125 °C with a frequency range of 50 KHz to 2000 KHz.
M21038/27-05
Pico Electronics
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; No. of Functions: 1; Height: 6.35 mm; Length: 13.208 mm; Application: GENERAL PURPOSE;
PA0185NLT
PA0185NLT by Pulse Electronics is a pulse transformer with 1500V isolation voltage, 980uH primary inductance, and 17.2 V-us min ET product. It is used for gate drive applications, operates b/w -40 to 130 °C, and has dimensions of L11.8xB8.8xH4.0 mm for surface mount installation.
SM91514AL-E
Bourns SM91514AL-E is a pulse transformer with 300uH primary inductance and 1:1 turns ratio. It offers 4300V isolation voltage, AEC-Q200 approval, and operates b/w -40 to 125°C. Ideal for datacom applications due to its compact size (7.62x6.73x5.72mm) and surface mount feature in TR packing method.
1000B-5001XNL
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Inductance (Primary): 350 uH; No. of Functions: 4; Minimum Operating Temperature: -55 Cel; Packing Method: TAPE & REEL; TUBE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved