Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
NJM3771D2 by New Japan Radio is a Motion Control IC with 22 terminals, operating at 4.75-5.25V. It features a max output current of 0.7A for stepper motor control applications. The IC's compact rectangular package style and through-hole terminal form make it suitable for various motion control systems.
Median Price
-
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Chip Stock
Nova Conductors
Huijzer Components
ComSIT Distribution GmbH
ComSIT USA
LittleDiode
Manoshevitz Elec. Sales
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
AZTECH Wire
$6.418
Kepictronics
Futuretech Components
Assy Fe
SIE Connect GmbH (Excess)
Aranea Global
Plastic/epoxy material provides durability and reliable performance, making this product suitable for a range of applications.
5V supply voltage ensures compatibility with a variety of systems and power sources.
With 22 terminals, this product offers versatile connectivity options for different configurations and setups.
Capable of delivering a maximum output current of 0.7A, this product is suitable for driving stepper motors and controlling motion effectively.
Motion Control ICs NJM3771D2 attributes and parameters. Explore more Motion Control ICs devices from New Japan Radio
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Output Current:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
NJM3771D2 Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Obsolescence/ EOL - Mult Dev EOL 20/Dec/2018
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
BSS138-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain Current (ID): .2 A; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BAV99
STMicroelectronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
1N4148
Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 200 Cel; No. of Elements: 1;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
B340A-13-F
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
Onsemi
BSS138PS,115
Nexperia
N-CHANNEL; Configuration: SEPARATE, 2 ELEMENTS WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 2; No. of Terminals: 6; Minimum DS Breakdown Voltage: 60 V;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
FDC5614P
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
PDRV8873SPWPRQ1
Texas Instruments
PDRV8873SPWPRQ1 by Texas Instruments is a Motion Control IC with 24 terminals, operating voltage range of 4.5V to 38V, and temperature grade suitable for automotive applications. It features a small outline package with heat sink, dual terminal position, and can operate in temperatures ranging from -40°C to 125°C. Ideal for brush DC motor control in automotive systems.
SLA7076MPR
Allegro MicroSystems
Allegro MicroSystems' SLA7076MPR is a Motion Control IC with 23 terminals, operating voltage of 3-5.5V, and output current up to 1.5A. Ideal for stepper motor control applications, it has a temperature range of -20 to 85°C and peak reflow temp of 260°C.
A4983SETTR-T
Allegro MicroSystems' A4983SETTR-T is a Motion Control IC with 35V supply voltage, 2.5A output current, and NMOS technology. Ideal for stepper motor control applications, this surface-mount chip carrier operates b/w -20°C to 85°C with a terminal pitch of 0.5mm.
L293D
Motion Control Electronics; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Technology: BIPOLAR;
FSBB15CH60F
FSBB15CH60F by Onsemi is a 27-terminal AC motor controller with a nominal voltage of 15V. It offers a max output current of 15A and operates within a supply voltage range of 13.5V to 16.5V. This motion control IC in MICROELECTRONIC ASSEMBLY package shape is ideal for applications requiring precise speed and torque control in hybrid technology setups.
MC34931SEK
Freescale Semiconductor
BRUSH DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 32; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
DRV8702DQRHBTQ1
DRV8702DQRHBTQ1 by Texas Instruments is a Motion Control IC with 32 terminals, operating at -40 to 125°C. It supports supply voltage range of 5.5-45V and features a compact square chip carrier package suitable for automotive applications. With surface mount capability and nickel/palladium/gold terminal finish, it's ideal for brush DC motor control in tight spaces.
TLE5205-2G
Infineon Technologies
Infineon's TLE5205-2G is a BCDMOS Motion Control IC for brush DC motors. It operates at 6-18V with a peak output current of 6A. With small outline packaging and single terminal position, it's ideal for compact motor control applications.
TLE4726GXUMA1
TLE4726GXUMA1 by Infineon is a Motion Control IC for automotive applications. It operates at 5V with a max output current of 1A. With a temp range of -40 to 125°C, it's ideal for stepper motor control in compact designs.
E-L6258
STEPPER MOTOR CONTROLLER; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Peak Reflow Temperature (C): NOT SPECIFIED;
DRV8842PWPR
Texas Instruments DRV8842PWPR is a motion control IC with 5A max output current and 24V nominal voltage. Ideal for industrial applications, it operates b/w -40 to 85°C, has a small outline package style, and supports stepper motor control.
DRV8350RHRGZT
Texas Instruments' DRV8350RHRGZT is a Motion Control IC with 48 terminals, suitable for Brushless DC Motor Controllers. It operates b/w -40 to 125°C, with a supply voltage range of 9-75V. The chip carrier package has a compact square shape and low profile design for automotive applications.
MAX6650EUB+
Maxim Integrated
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
MAX22205ATU+T
Analog Devices
Analog Devices' MAX22205ATU+T is a Motion Control IC with 38 terminals, operating from -40 to 125°C. It supports supply voltages from 4.5V to 65V and has a compact rectangular package for brush DC motor control applications. The chip carrier design with a very thin profile and no-lead terminals makes it suitable for surface mount assembly processes.
A4973SLBTR-T
Allegro MicroSystems' A4973SLBTR-T is a Motion Control IC with 16 terminals, operating voltage of 3-5V, and temp range of -20 to 85°C. Ideal for Brush DC Motor Controllers, this small outline package IC is surface mountable and has a compact size of 10.3mm x 7.5mm.
STSPIN32F0601Q
BRUSHLESS DC MOTOR CONTROLLER;
DRV8811PWPR
DRV8811PWPR by Texas Instruments is a Motion Control IC with 28 terminals and a supply voltage range of 8-38V. It features a max output current of 6A, suitable for Stepper Motor Controllers. With a compact rectangular package design and industrial temperature grade, it is ideal for applications requiring precise motion control in harsh environments.
BD6230F-E2
ROHM
ROHM's BD6230F-E2 is a Motion Control IC with 24V supply voltage, 0.5A output current, and 8 terminals. Ideal for BRUSH DC MOTOR CONTROL applications in industrial settings. Package: PLASTIC/EPOXY, Surface Mount: YES, Operating Temp: -40 to 85 °C.
PDRV8462DDWR
The Texas Instruments PDRV8462DDWR is a Motion Control IC with 44 terminals, operating voltage range of 4.5V to 65V, and max output current of 5A. Ideal for stepper motor control applications, it features a small outline package with dual terminal position and can operate in temperatures ranging from -40°C to 125°C.
LB11851FA-BH
LB11851FA-BH by Onsemi is a Motion Control IC with 12V supply voltage, suitable for industrial applications. Features include small outline package, dual terminal position, and matte tin finish. Ideal for brushless DC motor control with max output current of 0.02A and operating temperature range from -40 to 90°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
NJM3770AD3
New Japan Radio
STEPPER MOTOR CONTROLLER; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Position: DUAL;
NJM3772D2
STEPPER MOTOR CONTROLLER; No. of Terminals: 22; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Technology: BIPOLAR;
NJM3774D2
STEPPER MOTOR CONTROLLER; No. of Terminals: 22; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Pitch: 2.54 mm;
NJM3517D2
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NJM3717D2
NJM3773D2
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 22; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NJM3775D2
NJM3776D2
STEPPER MOTOR CONTROLLER; Temperature Grade: OTHER; No. of Terminals: 24; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
NJM37717D2
STEPPER MOTOR CONTROLLER; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Form: THROUGH-HOLE;
NJM37770D3
STEPPER MOTOR CONTROLLER; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO; Terminal Pitch: 2.54 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved