Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED POSITIVE MULTIPLE OUTPUT STANDARD REGULATOR; No. of Terminals: 5; Package Code: ZIP; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 2 %; Maximum Seated Height: 5.7 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Fixed Regulators - Positive Multiple Output Standard UPC37M32HB attributes and parameters. Explore more Fixed Regulators - Positive Multiple Output Standard devices from Nec Electronics America
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Current-2:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Maximum Output Voltage-2:
Minimum Output Voltage-2:
Nominal Output Voltage-2:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
Width:
UPC37M32HB Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semicoa
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
1N4148WT
Diodes Incorporated
LM7805CT
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
M39029/56351
Souriau
CONNECTOR ACCESSORY; MIL Conformity: YES; Contact Gender: FEMALE; Insertion Tools: M81969/14-10; Tool Settings: M22520/2-10; DIN Conformity: NO;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
BAV99
MICRODIODE ELECTRONICS SHENZHEN CO LTD
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
MBR0520L-T1
Won-top Electronics
MBR0520L-T1 by Won-top Electronics is a Schottky rectifier diode with 20V peak reverse voltage and 0.5A output current. It is a single-config, surface-mount diode in a small outline package, suitable for applications requiring high-speed switching and low forward voltage drop. Operating temperature range from -65°C to 125°C makes it ideal for various electronic circuits.
FDV304P
The Onsemi FDV304P is a P-CHANNEL FET with 25V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max Drain Current of 0.46A and an Operating Temperature range of -55 to 150 °C. The transistor comes in a PLASTIC/EPOXY package with GULL WING terminals, suitable for surface mount configurations.
2N7002
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G3;
LM358DR2G
LM358DR2G by Onsemi is a dual operational amplifier with 7000uV max input offset voltage and 70dB nominal CMRR. Ideal for applications requiring low bias current such as sensor interfaces, signal conditioning circuits, and audio amplifiers. Package style: Small Outline, Technology: Bipolar, Unity Gain Bandwidth: 1000 kHz.
ST2L05-1528K5
STMicroelectronics
ST2L05-1528K5 from STMicroelectronics is a fixed positive multiple output regulator with a max operating temp of 125 °C. It delivers two outputs: 1.5V (max 1A) and 2.8V (max 1A), ideal for compact electronic applications. Its small outline package ensures efficient surface mounting.
ST2L05R1833PT
ST2L05R1833PT from STMicroelectronics is a fixed positive multiple output regulator with a max operating temp of 125 °C. It delivers dual outputs of 1.8V and 3.3V, each capable of 1A current. Ideal for compact applications requiring stable voltage regulation in small electronic devices.
ST2L05R3325PT
ST2L05R3325PT from STMicroelectronics is a fixed positive multiple output regulator with a max output current of 1A. It features two outputs: 3.3V and 2.5V, with excellent load regulation (0.012%). Ideal for compact applications requiring stable voltage in a small footprint.
ST2L05-3315PT
ST2L05-3315PT from STMicroelectronics is a fixed positive multiple output regulator, ideal for compact applications. It features dual outputs of 3.3V (1A) and 1.5V (1A), with a max input voltage of 10V and excellent line regulation at 0.015%. Its small outline package ensures efficient surface mounting in space-constrained designs.
ST2L05-2518K5
ST2L05-2518K5 from STMicroelectronics is a fixed positive multiple output regulator, ideal for compact applications. It features a max output current of 1A, operates b/w 0 °C to 125 °C, and provides two outputs at 1.8V and 2.5V with excellent line regulation. Its small outline package ensures efficient surface mounting in space-constrained designs.
ST2L05R2525PT
ST2L05R2525PT from STMicroelectronics is a fixed positive multiple output regulator with a max operating temp of 125 °C. It delivers dual outputs at 2.5V, supporting up to 1A each, ideal for compact electronic applications. Its small outline package ensures efficient surface mounting.
ST2L05R2833K5
ST2L05R2833K5 from STMicroelectronics is a fixed positive multiple output regulator with a max operating temp of 125 °C. It delivers two outputs: 2.8V (1A) and 3.3V (1A), ideal for compact electronic applications. Its small outline package ensures efficient surface mounting.
ST2L05-3030PT
ST2L05-3030PT from STMicroelectronics is a fixed positive multiple output regulator with a max operating temp of 125 °C. It delivers dual outputs of 3V (±3% tolerance) at up to 1A each, ideal for compact electronic applications. Its gull-wing package ensures easy surface mounting.
ST2L05R1533K5
ST2L05R1533K5 from STMicroelectronics is a fixed positive multiple output regulator with a max operating temp of 125 °C. It delivers two outputs: 1.5V (1A) and 3.3V (1A), ideal for compact electronic applications. Its small outline package ensures efficient surface mounting.
STV8131
STV8131 by STMicroelectronics is a fixed positive multiple output regulator with a max operating temp of 150 °C. It delivers two outputs: 5V (max 5.2V) and 8V (max 8.3V), each supporting up to 1A current. Ideal for applications requiring stable voltage regulation in compact designs.
ST2L05-2828PT
ST2L05-2828PT by STMicroelectronics is a fixed positive multiple output regulator with a max operating temp of 125 °C. It delivers dual outputs at 2.8V, supporting up to 1A each, and features excellent line/load regulation. Ideal for compact electronic applications requiring stable voltage.
ST2L05R1518PT
ST2L05R1518PT by STMicroelectronics is a fixed positive multiple output regulator with a max operating temp of 125 °C. It delivers two outputs: 1.5V (1A) and 1.8V (1A), ideal for compact electronic applications. Its small outline package ensures efficient surface mounting.
ST2L05R1828K5
ST2L05R1828K5 from STMicroelectronics is a fixed positive multiple output regulator with a max temp of 125 °C. It delivers two outputs: 1.8V (max 1A) and 2.8V (max 1A), ideal for compact electronic applications. Its small outline package ensures efficient surface mounting.
ST2L05R3333K5
ST2L05R3333K5 from STMicroelectronics is a fixed positive multiple output regulator with a max output current of 1A and operates b/w 0 °C to 125 °C. It features a nominal output voltage of 3.3V and excellent line regulation at just 0.015%. Ideal for compact electronic applications, it ensures stable power supply in various devices.
ST2L05R1530K5
ST2L05R1530K5 from STMicroelectronics is a fixed positive multiple output regulator with a max input voltage of 10V and two outputs delivering 1A each at 1.5V and 3V. It operates b/w 0 °C to 125 °C, ensuring reliability in various applications. Its compact SO package features gull-wing terminals for easy surface mounting.
ST2L05R3018PS
ST2L05R3018PS from STMicroelectronics is a fixed positive multiple output regulator with a max operating temp of 125 °C. It delivers dual outputs of 3V (1A) and 1.8V (1A) with excellent line regulation at just 0.015%. Ideal for compact applications, it features a thin profile and no-lead design.
ST2L05R3315PS
ST2L05R3315PS from STMicroelectronics is a fixed positive multiple output regulator with dual outputs of 3.3V and 1.5V, each capable of delivering up to 1A. It operates within a temperature range of 0 °C to 125 °C and features excellent line regulation at just 0.015%. Ideal for compact applications, it comes in a small outline package with no lead design.
ST2L05R1528PT
ST2L05R1528PT from STMicroelectronics is a fixed positive multiple output regulator with a max operating temp of 125 °C. It delivers two outputs: 1.5V (1A) and 2.8V (1A), ensuring low line and load regulation. Ideal for compact electronic applications, it features a gull-wing package for easy surface mounting.
ST2L05R3033PT
ST2L05R3033PT from STMicroelectronics is a fixed positive multiple output regulator with a max operating temp of 125 °C. It delivers two outputs: 3V and 3.3V, each capable of 1A current. Ideal for compact applications, it features a small outline package and excellent load regulation.
935271098518
FIXED POSITIVE MULTIPLE OUTPUT STANDARD REGULATOR; No. of Terminals: 20; Package Code: HSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 5.9 %; Nominal Output Voltage-1: 8.5 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Nec Electronics America
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved