Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Package Body Material: PLASTIC/EPOXY;
Median Price
$1.232
Lifecycle Status
Suppliers In-Stock
32
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$1.190
100+ parts
$0.671
1k+ parts
$0.658
10k+ parts
$0.656
Farnell
$1.230
$0.653
$0.625
-
Texas Instruments
$1.233
$0.948
$0.499
Mouser Electronics
$1.800
$1.050
$0.913
$0.861
DigiKey
$1.073
$0.962
$0.885
Newark
$2.010
$1.660
$1.460
Element14
$2.330
$2.200
$2.100
Rochester
$0.975
$0.809
$0.721
Verical
$1.011
$0.901
Arrow
$0.916
$0.850
$0.801
Digiode
Nova Conductors
$0.740
Chip Stock
Prism Electronics
Anansix
Vyrian
Bristol Electronics
Odi Ramu Company
LIBRA Elektronik GmbH
Atlantic Semiconductor
Inventory MP
MISTER SPROCKETS
Flex Direct, LLC
Electronics Depot
ComSIT Distribution GmbH
Sea View Technologies
PC Components Company LLC
Sunrise Surplus Inc.
NexGen Digital
ACDS - Activité Composants Distribution Service
Holdelec - ElecDif-Pro
J & M Industries LLC
Ampacity Inc.
$0.530
Corphita
$0.624
Component Stockers USA
$0.700
$0.660
Netroflash
$0.703
$0.688
Argo Parts USA
Continental Prestige Electronics
$0.920
$0.664
$0.493
Parana Technologies
$6.775
$7.433
DigiPath Technology Company
$7.460
ChromeModa Solutions
$7.612
$6.242
IDEA Electronic Components Group
$6.851
Corohmni
$7.849
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
A-Z Elektronik GmbH
Alle Elektronik GmbH
Metaverse IC Inc.
Kepictronics
Other Function Regulators LP2995M/NOPB attributes and parameters. Explore more Other Function Regulators devices from National Semiconductor
JESD-30 Code:
Length:
No. of Functions:
No. of Outputs:
No. of Terminals:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Regulator Type:
Maximum Seated Height:
Surface Mount:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
LP2995M/NOPB Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
SZNUP2105LT1G
Onsemi
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
M39029/58-360
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Bytesonic Electronics
2N2222A
Allegro MicroSystems
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
1N4148WS
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14+
Multicomp Pro
SS14+ by Multicomp Pro is a Schottky rectifier diode with a max output current of 1A and a reverse test voltage of 40V. It is designed for surface mount applications in electronic circuits, offering a small outline package style and dual terminal position. With a temperature range from -65°C to 150°C, it is suitable for various industrial and consumer electronics.
FDN306P
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
2N7002
Nte Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .115 A; No. of Terminals: 3;
Promax-johnton
Lite-on Semiconductor
SSL-LXA228SRC-TR11
Lumex
SSL-LXA228SRC-TR11 by Lumex is a 1.9mm SINGLE COLOR LED with peak wavelength of 660nm and max forward current of 0.03A. Ideal for applications requiring SUPER RED light emission, such as indicator lights in electronic devices due to its clear lens and surface mounting feature.
LP2996AMRE/NOPB
LP2996AMRE/NOPB by Texas Instruments is a DDR termination regulator with 1.5A max output current and 5.5V max input voltage. It comes in a small outline package with gull wing terminals, suitable for surface mount applications in various electronic devices.
UA78H12ASC
Fairchild Semiconductor's UA78H12ASC is a 12V fixed voltage regulator with 5A output current. It features a max input voltage of 40V, 4% voltage tolerance, and hybrid technology. Ideal for applications requiring stable power supply in environments ranging from -25°C to +65°C.
UA78M22MJG
UA78M22MJG by Texas Instruments is a fixed voltage regulator with an output of 22V, ideal for applications requiring stable power supply. Operating temperature ranges from -55°C to 150°C, making it suitable for various environments. With a ceramic package body and through-hole terminals, it ensures reliable performance in demanding conditions.
LM209K
Raytheon Semiconductor
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 7 %; Nominal Output Voltage-1: 5 V; Technology: BIPOLAR;
5962-8778201UA
Satcon Electronics
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 3 %; Adjustability: FIXED; Package Equivalence Code: SIP3,.1ISO-TB;
LM209LA
LM209LA by Texas Instruments is a bipolar fixed regulator with 3 terminals, providing a nominal output voltage of 5V. Encased in a metal cylindrical package, it operates b/w -25°C to 150°C. Ideal for applications requiring stable voltage regulation in harsh environments.
LP3991TL-1.7/NOPB
National Semiconductor
Other Regulators; No. of Terminals: 4; Package Code: FBGA; Terminal Form: BALL; Maximum Input Voltage Absolute: 6.5 V; Maximum Voltage Tolerance: 3 %;
L7915CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Pitch: 2.54 mm; JESD-609 Code: e0;
LM305AP3
LM305AP3 by Texas Instruments is a bipolar voltage regulator with adjustable output from 4.5V to 40V, ideal for various applications. It features through-hole terminals, operates b/w 0°C to 70°C, and has a rectangular plastic/epoxy package body. With 8 terminals on a dual position layout, it offers precise regulation in an inline package style.
UA7918CKCP1
UA7918CKCP1 by Texas Instruments is a -18V fixed voltage regulator with 1.5A output current and 3.9V dropout voltage. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable power supply such as industrial equipment and automotive electronics.
LM723H
Harris Semiconductor
Other Regulators; No. of Terminals: 10; Terminal Form: WIRE; Package Shape: ROUND; Maximum Output Voltage-1: 37 V; Adjustability: ADJUSTABLE;
LM204J
LM204J by Texas Instruments is a bipolar voltage regulator with adjustable output voltage ranging from -0.015V to -40V. It has 14 terminals in an inline package style, suitable for various applications requiring precise voltage regulation. With a wide operating temperature range of -25°C to 85°C, it is ideal for industrial and automotive electronics.
LP2995MR/NOPB
LP2995MR/NOPB by Texas Instruments is a DDR termination regulator with 1.25V min output voltage and 1.5A max output current. It comes in a small outline package suitable for surface mount applications, making it ideal for compact electronic devices requiring stable power regulation.
LM317LZ-TR
Motorola
Other Regulators; No. of Terminals: 3; Nominal Dropout Voltage-1: 3 V; Technology: BIPOLAR; Packing Method: TR; No. of Outputs: 1;
LM305PP1
LM305PP1 by Texas Instruments is an adjustable bipolar regulator with a min output voltage of 4.5V and max output voltage of 40V. It has 8 terminals in a rectangular package, suitable for various applications requiring precise voltage regulation in temperatures ranging from 0 to 70°C.
UA78M05CLA
UA78M05CLA by Texas Instruments is a 5V fixed voltage regulator with a max output current of 0.5A and dropout voltage of 2V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable power supply such as industrial automation and consumer electronics.
L78M12CV
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Adjustability: FIXED; Qualification Status: Not Qualified;
MIC5166YML-TR
Micrel
DDR TERMINATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; No. of Functions: 1; Peak Reflow Temperature (C): 260;
LM317K
Other Regulators; No. of Terminals: 3; Package Equivalence Code: TO-204/-3; Package Body Material: METAL; Terminal Finish: Tin/Lead (Sn/Pb); No. of Outputs: 1;
SN209004DBVR
SN209004DBVR by Texas Instruments is a CMOS regulator with 2.8V output voltage, 0.15A output current, and 1V dropout voltage. It operates in temperatures ranging from -40 to 125°C and has a max input voltage of 10V. This small outline, thin profile package is ideal for applications requiring precise voltage regulation in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LP2951ACSDX-3.3/NOPB
Other Regulators; No. of Terminals: 8; Package Code: SON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 1.4 %;
LP2951ACSDX-3.0/NOPB
LP2951ACSDX-3.0/NOPB by National Semi is a BIPOLAR regulator with 3V output, 1.4% voltage tolerance, and -40 to 125 °C operating temp. Ideal for applications requiring fixed voltage regulation in small outline packages with surface mount capability.
LP2951ACSD-3.3/NOPB
LP2951ACSD-3.3/NOPB by National Semiconductor is a bipolar technology regulator with 8 terminals and a small outline package. It has an output voltage of 3.3V, load regulation of 0.0066%, and max current of 0.1A. Ideal for applications requiring fixed voltage regulation in temperature range -40 to 125°C.
LP2951ACSD-3.0/NOPB
LP2951ACSD-3.0/NOPB by National Semiconductor is a BIPOLAR regulator with 3V output voltage, 1.4% voltage tolerance, and -40 to 125 °C operating temperature range. Ideal for applications requiring fixed or adjustable output voltages in small outline packages with surface mount capabilities.
LP2951CSD-3.3/NOPB
Other Regulators; No. of Terminals: 8; Package Code: SON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2.4 %;
LP2951CSDX-3.3/NOPB
LP2951CSD-3.0/NOPB
LP2951CSDX-3.0/NOPB
LP2997MRX/NOPB
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HLSOP; Terminal Form: GULL WING; Width: 3.9 mm; Package Equivalence Code: SOP8,.25;
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HLSOP; Terminal Form: GULL WING; Package Equivalence Code: SOP8,.25; No. of Outputs: 1;
LP2995MX/NOPB
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Terminal Finish: MATTE TIN; Width: 3.9 mm;
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; JESD-30 Code: R-PDSO-G8; Package Body Material: PLASTIC/EPOXY;
LP2951CN3.0
Other Regulators; No. of Terminals: 8; Package Code: DIP; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2.4 %;
LP2995M/NOPB
LP2995M/NOPB by Texas Instruments is a DDR termination regulator with a max output current of 1.5A and a min input voltage of 2.2V. It is commonly used in applications requiring small outline package regulators for DDR memory termination.
LP2996MRX/NOPB
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HLSOP; Terminal Form: GULL WING; Packing Method: TR; Surface Mount: YES;
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HLSOP; Terminal Form: GULL WING; Maximum Input Voltage: 5.5 V; Width: 3.9 mm;
LP2997MR/NOPB
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HLSOP; Terminal Form: GULL WING; No. of Functions: 1; JESD-30 Code: R-PDSO-G8;
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HLSOP; Terminal Form: GULL WING; Terminal Pitch: 1.27 mm; Package Equivalence Code: SOP8,.25;
LP2951ACD3.3
Other Regulators; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 1.4 %;
LP2995MRX
DDR TERMINATION REGULATOR; No. of Terminals: 8; Package Code: HLSOP; Terminal Form: GULL WING; Terminal Position: DUAL; No. of Functions: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved