Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PARALLEL IN PARALLEL OUT; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Anansix
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Supply Digital
Corphita
Digital Shift Registers MM74HC194J attributes and parameters. Explore more Digital Shift Registers devices from National Semiconductor
Additional Features:
Count Direction:
Family:
JESD-30 Code:
JESD-609 Code:
Length:
Load Capacitance (CL):
Logic IC Type:
Maximum Frequency At Nominal Supply:
No. of Bits:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Propagation Delay (tpd):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Trigger Type:
Width:
Minimum fmax:
MM74HC194J Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
2N2222A
New England Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
General Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Solid State Devices
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
EU2B-YS3103F
Idec
ROTARY SWITCH;
LM107H/883
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Average Bias Current (IIB): .1 uA;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Crimson Semiconductor
SN74LV165ADRG3
SN74LV165ADRG3 by Texas Instruments is an 8-bit digital shift register with a supply voltage of 2-5.5V, operating at frequencies up to 35MHz. It features a propagation delay of 26ns, positive edge trigger type, and 3-state output characteristics. Ideal for automotive applications due to its temperature grade and small outline package style.
SN74LV595ADR
SN74LV595ADR by Texas Instruments is an 8-bit digital shift register with a supply voltage of 2-5.5V, operating temperature range of -40 to 125°C, and propagation delay of 25.5ns. It features a true output polarity, positive edge trigger type, and 3-state output characteristics suitable for automotive applications.
HEF4094BTT-Q100J
Nexperia
SERIAL IN PARALLEL OUT; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
CD4015BM96G4
CD4015BM96G4 by Texas Instruments is a digital shift register with 4 bits. It operates at a nominal voltage of 5V and has a propagation delay of 320ns. Suitable for military applications, it features positive edge trigger type and can handle temperatures from -55 to 125°C.
HEF4094BT
NXP Semiconductors
HEF4094BT by NXP Semiconductors is an 8-bit digital shift register with a propagation delay of 330 ns and a max frequency of 5 MHz. It operates at a nominal voltage of 5V, suitable for automotive applications due to its temperature grade. The device features a small outline package style, true output polarity, and positive edge trigger type.
74HC597PW,118
NXP Semiconductors' 74HC597PW,118 is an 8-bit digital shift register with a supply voltage of 5V and propagation delay of 53ns. It operates in automotive-grade temperatures from -40 to 125°C, suitable for applications requiring high-speed data transfer such as automotive electronics and industrial control systems.
74AHC594PW,118
NXP Semiconductors' 74AHC594PW,118 is an 8-bit digital shift register with a propagation delay of 15.1 ns and operates at a supply voltage of 5V. Ideal for automotive applications, it features positive edge triggering, a compact rectangular package style, and can handle temperatures ranging from -40 to 125°C.
CD4094BE
CD4094BE by Texas Instruments is an 8-bit digital shift register with a propagation delay of 250 ns at 5V. It features a max frequency of 1.25 MHz and operates in the temperature range of -55 to 125°C. Ideal for applications requiring true output polarity and positive edge trigger type, such as military-grade electronics.
HEF4014BT-Q100,118
NXP Semiconductors' HEF4014BT-Q100,118 is an 8-bit digital shift register with a propagation delay of 260ns. Operating b/w -40 to 85°C, it supports a supply voltage range of 3-15V. Ideal for industrial applications requiring positive edge triggering and true output polarity in a compact small outline package.
SN74AHC595DBR
SN74AHC595DBR by Texas Instruments is an 8-bit digital shift register with a supply voltage range of 2-5.5V and a max frequency of 85MHz. It features a propagation delay of 18.5ns, operates at temperatures from -40 to 125°C, and is ideal for automotive applications due to its small outline package and low power consumption.
74HC594D,118
NXP Semiconductors' 74HC594D,118 is an 8-bit digital shift register with a propagation delay of 225 ns. Operating b/w -40 to 125°C, it has a max frequency of 20 MHz and supports a supply voltage range of 2-6V. Ideal for automotive applications due to its compact size and positive edge trigger type.
SN74LV594APW
SN74LV594APW by Texas Instruments is an 8-bit digital shift register with a supply voltage of 2.5V, operating temperature range of -40 to 125°C, and propagation delay of 18.6ns. It is ideal for automotive applications due to its compact size, low power consumption (0.02mA), and high max frequency (85MHz).
MM74HC164MX
MM74HC164MX by Onsemi is an 8-bit digital shift register with a propagation delay of 218ns. It operates at a supply voltage range of 2-6V and has a max frequency of 24MHz. Ideal for industrial applications requiring true output polarity and positive edge trigger type in compact designs.
SN74LS95BJ4
SN74LS95BJ4 by Texas Instruments is a 4-bit digital shift register with TTL technology. It operates at 5V, has 14 terminals in an in-line package style, and can withstand temperatures from 0 to 70°C. Ideal for commercial applications requiring serial data transfer and storage.
CD74HC299E
Intersil
PARALLEL IN PARALLEL OUT; Temperature Grade: MILITARY; Terminal Form: THROUGH-HOLE; No. of Terminals: 20; Package Code: DIP; Package Shape: RECTANGULAR;
CD74HC4094M96
Shift Registers; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
SN74HC166PWR
SN74HC166PWR by Texas Instruments is an 8-bit digital shift register with a propagation delay of 32ns. It operates at a nominal voltage of 5V and has a max frequency of 25MHz. Ideal for industrial applications requiring fast data shifting in compact spaces due to its small outline, thin profile package.
SN74HC595DBRG4
SN74HC595DBRG4 by Texas Instruments is an 8-bit digital shift register with a propagation delay of 34ns. It operates at a nominal voltage of 5V and has a max frequency of 25MHz. Ideal for industrial applications requiring positive edge triggering and true output polarity in a compact small outline package.
SN74HC165QPWRG4Q1
SN74HC165QPWRG4Q1 by Texas Instruments is an 8-bit digital shift register with a propagation delay of 38ns. It operates at a nominal voltage of 5V and has a max frequency of 25MHz. This CMOS technology device is designed for automotive applications, featuring positive edge triggering and complementary output polarity.
74LV4094D,112
NXP Semiconductors' 74LV4094D,112 is an 8-bit digital shift register with a propagation delay of 90 ns. Operating at a supply voltage of 3.3V, it features positive edge triggering and 3-state output characteristics. Ideal for automotive applications due to its small outline package and CMOS technology, offering a max operating temperature of 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
National Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved