Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SERIAL IN PARALLEL OUT; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
Median Price
$0.442
Lifecycle Status
Suppliers In-Stock
46
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.424
100+ parts
$0.390
1k+ parts
$0.365
10k+ parts
-
Master Electronics
$1.590
$0.570
Rochester
$0.370
$0.307
$0.274
DigiKey
$0.460
Freelance Electronics
$0.263
Digiode
$0.288
Nova Conductors
TEDSS.com
$0.400
$0.190
Component Electronics Inc.
$0.770
$0.580
$0.500
American Microsemiconductor Inc.
Chip Stock
Anansix
ComSIT Distribution GmbH
Vyrian
Bristol Electronics
Martec Srl
Prism Electronics
Pegasus Components GmbH
ECAB
Atlantic Semiconductor
Electronic Expediters
Sea View Technologies
Inland Empire Components Inc.
J & M Industries LLC
PC Components Company LLC
Inventory MP
Sogenti Electronics
MISTER SPROCKETS
LWI Electronics Inc
Zilex Electronics Inc.
Semi Source
Speed Components Ltd
Manoshevitz Elec. Sales
Vectronix, Inc
Sinequanon
DigiKey Marketplace
$0.320
Fibra_Brandt Electronic GMBH
Mil-Aero Solutions, Inc.
Euro-Tech
GES GmbH
First Choice Components Inc.
A2Z Electronics, Inc.
Semtec, LLC
Resion
Electronics Depot
Ashlea Components Ltd
Ampacity Inc.
$0.258
Semicontronic
$0.252
$0.250
Corohmni
Corphita
$0.273
Component Stockers USA
$0.310
$0.290
$0.260
Continental Prestige Electronics
$0.358
Argo Parts USA
$0.354
Netroflash
Advanced Electronics
Aztec Data Supply Inc.
$26.038
QUARKTWIN TECHNOLOGY LTD
Metaverse IC Inc.
TANS Electronics
Microchip USA
A-Z Elektronik GmbH
Problanco Electronics
Authorized Procurement Solutions
SupplyDigital Components
Glotronic Ltd.
Kepictronics
Perfect Parts
Kulean Microsystems
Supply Digital
UHIMA Technologies
Computer Components Inc. - USA
Assy Fe
Futuretech Components
Speed Components Ltd (Excess)
Ashlea Components Ltd (Excess)
Digital Shift Registers MM74HC164N attributes and parameters. Explore more Digital Shift Registers devices from National Semiconductor
Count Direction:
Family:
JESD-30 Code:
JESD-609 Code:
Length:
Load Capacitance (CL):
Logic IC Type:
Maximum Frequency At Nominal Supply:
No. of Bits:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Polarity:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Power Supplies (V):
Propagation Delay (tpd):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage / Vsup (V):
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Trigger Type:
Width:
Minimum fmax:
MM74HC164N Logic ICs trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-200-8143, 5962012008143, 5962-99-282-4035, 5962992824035
NIIN
012008143, 992824035
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
1N4148
American Power Devices
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
New Jersey Semiconductor Products
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
STM32H743ZIT6
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
MBRM140T1G
Onsemi
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
MC74HC595ADTG
MC74HC595ADTG by Onsemi is an 8-bit digital shift register with a propagation delay of 210 ns. It operates at a supply voltage range of 2-6V and has a max frequency of 20MHz. Ideal for applications requiring positive edge triggering, such as military-grade temperature-sensitive systems.
MC74HC595ADR2
Motorola
SERIAL IN PARALLEL OUT; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
CD74HCT165M
CD74HCT165M by Texas Instruments is an 8-bit digital shift register with a propagation delay of 50ns at 5V. It features positive edge trigger, complementary output polarity, and operates in the temperature range of -55 to 125°C. Ideal for applications requiring high-speed data transfer and precise timing control in military-grade electronics.
M74HC595YRM13TR
M74HC595YRM13TR by STMicroelectronics is an 8-bit digital shift register with a propagation delay of 125 ns and a max frequency of 24 MHz. It is designed for automotive applications, featuring a supply voltage range of 2-6V and AEC-Q100 screening level. This CMOS technology chip has a small outline package style, making it suitable for space-constrained designs in automotive electronics.
CD74HC164M
Harris Semiconductor
SERIAL IN PARALLEL OUT; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
74HC4094D,652
NXP Semiconductors' 74HC4094D,652 is an 8-bit digital shift register with a propagation delay of 295 ns and max frequency of 24 MHz. It operates at a supply voltage range of 2-6V, suitable for automotive applications due to its temperature grade. The device features positive edge triggering and outputs in true polarity with a 3-state configuration.
Intersil
PARALLEL IN SERIAL OUT; Temperature Grade: MILITARY; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
CD74HCT165MTE4
CD74HCT165MTE4 by Texas Instruments is an 8-bit digital shift register with a supply voltage of 5V, operating temperature range of -55 to 125°C, and propagation delay of 60ns. It is used in military-grade applications requiring a max frequency of 18MHz, positive edge trigger type, and complementary output polarity.
CD74HCT164M
HEF4015BT,653
Nexperia
SERIAL IN PARALLEL OUT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR;
CD4015BM96G4
Rochester Electronics
74HC595D(BJ)
Toshiba
Toshiba's 74HC595D(BJ) is an 8-bit digital shift register with a supply voltage of 5V, operating temperature range from -40 to 125°C, and a max frequency of 20MHz. It features a small outline package style for surface mount applications. Ideal for projects requiring high-speed data transfer in compact electronic designs.
MC14094BDTR2G
MC14094BDTR2G by Onsemi is an 8-bit digital shift register with a supply voltage of 5V and operating temperature range from -55 to 125°C. It features a propagation delay of 840ns, output in TRUE polarity, and supports a max frequency of 3MHz. Ideal for military-grade applications requiring high-speed data shifting in compact spaces.
SN74HC595N
SN74HC595N by Texas Instruments is a digital shift register with 8 bits and a propagation delay of 34 ns. It operates at a nominal voltage of 5V and is commonly used in industrial applications for its true output polarity and positive edge trigger type.
SN74HC165DBRG4
SN74HC165DBRG4 by Texas Instruments is an 8-bit digital shift register with a propagation delay of 190 ns. It operates at a nominal voltage of 5V and has a max frequency of 25 MHz. This CMOS technology device is ideal for industrial applications requiring positive edge triggering and complementary output polarity.
CD74HC164E
CD74HC164E by Texas Instruments is an 8-bit digital shift register with a propagation delay of 38ns at 4.5V, suitable for military-grade applications. It operates on a supply voltage range of 2-6V, has a max frequency of 20MHz, and features positive edge triggering. The package style is in-line with through-hole terminals and a tube packing method.
SN74AHCT594PWRE4
SN74AHCT594PWRE4 by Texas Instruments is an 8-bit digital shift register with a propagation delay of 10.1 ns and operates at a supply voltage of 5V. It is designed for industrial applications requiring fast data shifting, featuring positive edge triggering and a max operating temperature of 85°C.
MM74HC164N
MC54F164J
MC54F164J by Motorola is an 8-bit digital shift register with a supply voltage of 5V and propagation delay of 13ns. It operates in military-grade temperatures from -55 to 125°C, suitable for high-frequency applications up to 70MHz. The TTL technology chip has a through-hole terminal form and is ideal for true output polarity requirements.
74LV4094D
NXP Semiconductors' 74LV4094D is an 8-bit digital shift register with a propagation delay of 90ns. Operating at a supply voltage of 3.3V, it features positive edge triggering and true output polarity. Ideal for automotive applications, this CMOS technology-based IC has a max operating temperature of 125°C and is surface-mountable in a small outline package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MM74HC595MTCX
SERIAL IN PARALLEL OUT; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR;
MM74HC595MX
MM74HC595N
SERIAL IN PARALLEL OUT; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
MM74HC595N by Onsemi is a digital shift register with 8 functions, operating at 5V. It has a propagation delay of 367ns and supports a max frequency of 24MHz. Ideal for industrial applications requiring true output polarity and positive edge trigger type.
MM74HC595MTC
MM74HC595M
MM74HC595M by Onsemi is a digital shift register with 8 bits and a propagation delay of 367 ns. It operates at a nominal voltage of 4.5V and can handle temperatures up to 85°C. This versatile component is commonly used in industrial applications requiring high-frequency operation.
MM74HC165N
PARALLEL IN SERIAL OUT; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR;
MM74HC165N by National Semiconductor is a digital shift register with 8 functions, operating at a supply voltage of 5V. It features a propagation delay of 189ns and can handle load capacitance up to 50pF. Ideal for industrial applications requiring high-speed data transfer and precise timing control.
MM74HC164N by Onsemi is an 8-bit digital shift register with a supply voltage of 5V and propagation delay of 218ns. It operates in industrial temperatures from -40 to 85°C, suitable for applications requiring a max frequency of 21MHz such as data storage and signal processing.
MM74HC589N
MM74HC166N
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved