Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SWITCHED CAPACITOR FILTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Response Type: LOWPASS;
Median Price
-
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
Sunrise Surplus Inc.
PC Components Company LLC
Bristol Electronics
One Stop Electronics
$0.690
AZTECH Wire
$6.160
$5.920
$5.800
$5.680
Parana Technologies
$21.404
$21.750
DigiPath Technology Company
$23.568
$21.683
ChromeModa Solutions
$24.049
$19.720
IDEA Electronic Components Group
$22.847
$21.644
Corphita
Kepictronics
Active Filters MF6CWM-100 attributes and parameters. Explore more Active Filters devices from National Semiconductor
Supply Voltage Limit:
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage:
Maximum Supply Current (Isup):
Maximum Negative Supply Voltage:
Minimum Negative Supply Voltage:
Nominal Negative Supply Voltage:
Semiconductor Technology:
Response Type:
Filter Technology:
Maximum Frequency - Cutoff or Center:
Minimum Frequency - Cutoff or Center:
Transfer Characteristics:
Poles and Zeros:
Filter Order:
Maximum Operating Temperature:
Minimum Operating Temperature:
Temperature Grade:
Total Functions:
Total Terminals:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Length:
Width:
Seated Height Limit:
Package Style:
Form Factor:
Package Code:
Package Equivalence Code:
Package Body Material:
Surface Mounting:
JESD-30 Code:
JESD-609 Code:
Qualified:
MF6CWM-100 Active Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
BAV99
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
EU2B-YS3103F
Idec
ROTARY SWITCH;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SS14
Forward International Electronics
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; No. of Elements: 1; No. of Phases: 1; Maximum Output Current: 1 A;
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
MICRODIODE ELECTRONICS SHENZHEN CO LTD
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
1N4148WS
Cheng-yi Electronic
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20
Maxim Integrated
DS18B20 by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Commonly used in applications requiring precise temperature monitoring like HVAC systems and industrial automation.
Weitronic Enterprise
Good-ark Electronics
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
TSG8512CFP
STMicroelectronics TSG8512CFP is a CMOS active filter with 16 terminals. It operates at -5V to +5V, consuming 5mA max supply current. Ideal for lowpass filtering applications, it features an elliptic response type and can withstand temperatures from 0 °C to 70°C.
MAX7412CUA+T
Analog Devices
Analog Devices' MAX7412CUA+T is a CMOS active filter with 5 poles and 0 zeros, operating b/w 0-70 °C. It has a lowpass response type with a cutoff frequency range of 0.001 kHz to 15 kHz, suitable for various commercial applications requiring precise signal filtering.
MF4A-50MP
Texas Instruments
The Texas Instruments MF4A-50MP is a CMOS active filter with 8 terminals and a cutoff frequency range of 0.0001 kHz to 40 kHz. It operates on +-2.5/+-5 V power supplies, has a lowpass response type, and follows the Butterworth transfer characteristics. Ideal for military applications due to its MILITARY temperature grade and through-hole package style.
LTC1069-7CS8#PBF
LTC1069-7CS8#PBF by Analog Devices is a CMOS active filter with 8 poles and zeros, operating at -5V to 5V. It has a lowpass Bessel response type with a cutoff frequency range of 0-200 kHz. Ideal for commercial applications requiring precise signal filtering in compact designs.
MAX7413CUA+
Analog Devices' MAX7413CUA+ is a CMOS active filter with 5 poles and 0 zeros, operating b/w 0-70°C. It has a lowpass Bessel response type with a cutoff frequency range of 0.001 kHz to 15 kHz. Ideal for applications requiring switched capacitor filters in commercial temperature grade environments.
LTC1068-25CG
LTC1068-25CG by Analog Devices is a 4-function switched capacitor filter with -5.5V max negative supply voltage and 200 kHz max cutoff frequency. Ideal for active filtering applications, it features a small outline package with 28 terminals and universal response type.
MAX7410EUA+T
Analog Devices' MAX7410EUA+T is a CMOS active filter with 5 poles and 0 zeros, operating b/w -40 to 85 °C. It has a lowpass Butterworth response type, cutoff frequency range of 0.001 kHz to 15 kHz, and requires a supply voltage of 4.5V to 5.5V. Ideal for industrial applications requiring precise signal filtering in compact spaces.
MAX7442ESD
Analog Devices' MAX7442ESD is a BICMOS active filter with 6 functions, 4 poles, and 0 zeros. It operates as a continuous time lowpass Butterworth filter with a supply voltage range of 4.75V to 5.25V. Ideal for industrial applications requiring precise signal filtering in a compact small outline package.
MAX7419EUA
MAX7419EUA by Analog Devices is a BICMOS active filter with 4.1 mA Isup, suitable for switched capacitor filtering applications. It operates b/w -40 to 85 °C, has 5 poles and zeros, and requires Vsup of 4.5-5.5V. The package is small outline with gull wing terminals, ideal for industrial use in lowpass filtering systems.
MF4A-100MP
Texas Instruments' MF4A-100MP is a CMOS active filter with 8 terminals and lowpass response. It operates at temperatures from -55 to 125 °C, with cutoff frequency range of 0.00005 kHz to 20 kHz. Ideal for military applications due to its MILITARY temperature grade.
LTC1069-1IS8#TRPBF
LTC1069-1IS8#TRPBF by Analog Devices is a CMOS active filter with 8 poles, 0 zeros, and lowpass response. It operates b/w -40 to 85 °C, has a cutoff frequency range of 0-8 kHz, and requires supply voltage from 1.57V to 5.5V. Ideal for industrial applications requiring precise signal filtering in compact designs.
LTC1063CN8#TRPBF
LTC1063CN8#TRPBF by Analog Devices is an 8-terminal active filter with a nominal voltage of 5V. It features a lowpass response type, Butterworth transfer characteristics, and operates in an industrial temperature range (-40 to 85 °C). Ideal for applications requiring a max cutoff frequency of 50 kHz.
LTC1068-50CG#PBF
LTC1068-50CG#PBF by Analog Devices is a 4-function switched capacitor filter with -5.5V max negative supply voltage and 50kHz cutoff frequency range. Ideal for active filtering applications, it features a small outline package style and operates b/w 0 °C to 70°C temperature range.
MF10CCWMX/NOPB
National Semiconductor
SWITCHED CAPACITOR FILTER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 20; Package Code: SOP; Response Type: UNIVERSAL;
LTC1264CSW#PBF
LTC1264CSW#PBF by Analog Devices is a 24-terminal active filter with switched capacitor technology. It operates at temperatures ranging from -40 to 85 °C and has a cutoff frequency range of 0.1 kHz to 250 kHz, making it ideal for industrial applications requiring universal response types like Butterworth or Chebyshev filters.
LTC1164-7CSW#TR
LTC1164-7CSW#TR by Analog Devices is a switched capacitor active filter with 8 poles, 0 zeros, and a Bessel response type. It operates in an industrial temperature range from -40 to 85 °C and has a cutoff frequency range up to 20 kHz. This small outline package is ideal for applications requiring precise low-pass filtering in electronic circuits.
LTC1569IS8-7
LTC1569IS8-7 by Analog Devices is a continuous time active filter with 10 poles and 0 zeros. It operates in an industrial temperature range from -40 to 85°C, with a cutoff frequency up to 150 kHz. This small outline package is ideal for lowpass filtering applications in various electronic systems.
MAX7419CUA
MAX7419CUA by Analog Devices is a BICMOS active filter with 8 terminals. It operates on 4.5-5.5V supplies, consuming 4.1mA current at max. Ideal for lowpass filtering applications due to its switched capacitor design and Bessel transfer characteristics.
TLC14CDRG4
TLC14CDRG4 by Texas Instruments is an active filter with 8 terminals, operating at -6V to +6V. It features a lowpass response type with a cutoff frequency range of 0.00005 kHz to 20 kHz. Ideal for commercial applications requiring switched capacitor filters in a compact small outline package.
MAX7408EPA+
Analog Devices' MAX7408EPA+ is a CMOS active filter with 5 poles and 0 zeros, operating at a supply voltage range of 4.5V to 5.5V. With a lowpass response type and elliptic transfer characteristics, it has a cutoff frequency range from 0.001 kHz to 15 kHz. Ideal for industrial applications requiring precise signal filtering in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved