Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 4 %;
Median Price
$0.842
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Rochester
1+ parts
$0.370
100+ parts
$0.360
1k+ parts
10k+ parts
-
Texas Instruments
$0.648
$0.341
Mouser Electronics
$1.360
$0.673
$0.635
$0.593
DigiKey
$0.797
$0.711
Arrow
$0.396
Adafruit Industries
Nova Conductors
$0.542
Digiode
$0.800
TME
$1.110
$0.652
$0.582
$0.530
Vyrian
Chip Stock
Anansix
ACDS - Activité Composants Distribution Service
Semicontronic
$0.337
$0.329
$0.327
Ampacity Inc.
Argo Parts USA
$0.526
Continental Prestige Electronics
$0.531
Netroflash
$0.515
$0.504
Corphita
$0.758
Component Stockers USA
$1.050
$0.580
Corohmni
$6.963
Parana Technologies
$8.218
$8.830
DigiPath Technology Company
$9.049
$8.325
ChromeModa Solutions
$9.234
$7.572
IDEA Electronic Components Group
$8.772
$8.311
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Authorized Procurement Solutions
iodParts Technologies Inc.
Advanced Electronics
Fixed & Adjustable Regulators - Positive Single Output LDO LP4951CM/NOPB attributes and parameters. Explore more Fixed & Adjustable Regulators - Positive Single Output LDO devices from National Semiconductor
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
LP4951CM/NOPB Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Devices 21/Aug/2017
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
1N4148
Rectron
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Samsung
N-CHANNEL AND P-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 5 ohm; No. of Terminals: 3;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
LM317AEMP/NOPB
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
LM317T
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
LL4148GS08
Temic Semiconductors
LL4148GS08 by Temic Semiconductors is a glass diode with a max reverse recovery time of 0.008 us and max forward voltage of 1 V. It is a rectifier diode with a max output current of 0.15 A, ideal for applications requiring fast switching speeds and low power dissipation in electronic circuits.
LL4148
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM2931AZ-5.0G
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
Electronic Devices
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
LP2951ACMX-3.3/NOPB
National Semiconductor
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 1.4 %;
LP2960AIMX-5.0/NOPB
LP2960AIMX-5.0/NOPB by Texas Instruments is a 16-terminal LDO regulator with fixed adjustability and 5V nominal output voltage. It offers a max output current of 0.5A, dropout voltage of 0.47V, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact spaces.
MAX1818EUT18-TG16
Maxim Integrated
MAX1818EUT18-TG16 by Maxim Integrated is a fixed/adjustable positive single output LDO regulator with 1.8V nominal output voltage and 0.5A max output current. It comes in a small outline, low profile package suitable for surface mount applications, making it ideal for compact electronic devices requiring stable power supply.
LP2951ACD-3.0R2G
LP2951ACD-3.0R2G by Onsemi is a fixed/adjustable positive single output LDO regulator with 1.4% max voltage tolerance, 0.003% max load regulation, and 150°C max operating temperature. Ideal for applications requiring precise voltage regulation in compact spaces like consumer electronics and industrial equipment.
LP2951ACM-3.3/NOPB
LP2986AIMX-3.0
LP2986AIMX-3.0 by Texas Instruments is a fixed/adjustable positive single output LDO regulator with a max output current of 0.2A and nominal output voltage of 3V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
MIC5158YM-TR
Micrel
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; Packing Method: TR; Terminal Finish: MATTE TIN; Maximum Time At Peak Reflow Temperature (s): 40;
MAX6329TPUT+T
Analog Devices
Analog Devices' MAX6329TPUT+T is a BICMOS LDO regulator with 3.3V output voltage, 0.15A max current, and 0.36V dropout voltage. Ideal for applications requiring stable power supply in compact spaces due to its small outline package and adjustable output feature. Operating temperature range from 0°C to 85°C makes it suitable for various electronic devices.
LT1580CR-2.5#TR
Analog Devices' LT1580CR-2.5#TR is a 2.5V fixed/adjustable positive single output LDO regulator with a max output current of 7A and 0.8V dropout voltage, suitable for applications requiring precise voltage regulation in compact spaces. Operating temperature range from 0 to 150 °C makes it versatile for various electronic devices, featuring a small outline package style ideal for surface mount assembly.
LP2951CD-3.3
Motorola
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 30 V; Maximum Voltage Tolerance: 2.4 %;
MAX1792EUA25/V+
FIXED/ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; Terminal Finish: MATTE TIN; JESD-609 Code: e3; Screening Level: AEC-Q100; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
LP2960AIM-5.0
LP2960AIM-5.0 by Texas Instruments is a fixed/adjustable positive single output LDO regulator with 5V nominal output voltage, 0.5A max output current, and 1.4% max voltage tolerance. It is ideal for applications requiring stable voltage regulation in a compact package, suitable for surface mount technology and operating temperatures ranging from -40 to 125°C.
MAX6469TA25AD3
Analog Devices' MAX6469TA25AD3 is a BICMOS LDO regulator with 2.5V output, 0.25V dropout voltage, and 0.3A max output current. Ideal for applications requiring precise voltage regulation in compact spaces due to its small outline package style and surface mount capability at temperatures ranging from -40 °C to 150°C.
ADP7112ACBZ-1.2-R7
ADP7112ACBZ-1.2-R7 by Analog Devices is a CMOS LDO regulator with 0.42V dropout voltage, 18.8V max input-output differential, and 5V output. It's used in applications requiring precise voltage regulation in compact spaces due to its small form factor and adjustable feature for flexibility.
MAX6470TA285AD4
Analog Devices' MAX6470TA285AD4 is a BICMOS LDO regulator with 2.85V output voltage, 0.3A max current, and 5% voltage tolerance. Ideal for compact designs in consumer electronics, it operates b/w -40 to 85 °C, suitable for various applications requiring stable power supply.
LP2953I-3.3MDC
LP2953I-3.3MDC by Texas Instruments is a BIPOLAR LDO Regulator with 0.8V Dropout Voltage, 125°C Max Temp, and 29V Max Output. Ideal for applications requiring a fixed/adjustable 3.3V output voltage in surface mount designs.
LP2951-03YM
MAX6469UT285BD4
Analog Devices' MAX6469UT285BD4 is a BICMOS LDO regulator with 2.85V output voltage, 0.3A max current, and 5V max output. It's used in applications requiring fixed/adjustable positive single output regulators in compact spaces with temp range -40 to +85 °C.
MAX6470TA27BD3
Analog Devices' MAX6470TA27BD3 is a BICMOS LDO regulator with 2.7V output voltage, 0.3A max current, and 2.7% voltage tolerance. Ideal for applications requiring fixed/adjustable positive single output regulators in compact spaces with temp range -40 to +85 °C.
MAX6349TLUT+T
Analog Devices' MAX6349TLUT+T is a BICMOS LDO regulator with 3.3V output, 0.15A current, and 3% voltage tolerance. Ideal for applications requiring low dropout voltage of 0.36V, such as portable electronics or IoT devices due to its small form factor and wide operating temperature range of -40 °C to +85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LP4951CMX/NOPB
LP4951CMX/NOPB by Texas Instruments is a fixed/adjustable positive single output LDO regulator with 5V nominal output voltage. It has a max dropout voltage of 0.6V and can handle up to 0.1A output current. Ideal for applications requiring precise voltage regulation in compact spaces.
LP4951CM/NOPB
LP4951CM/NOPB by Texas Instruments is a fixed/adjustable positive single output LDO regulator with a max output voltage of 29V and dropout voltage of 0.6V. It operates b/w -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs. With excellent load and line regulation, this device is ideal for electronics demanding stable power supply solutions.
LP4951CM
LP4951CMX
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved