Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSSOP; Package Shape: RECTANGULAR;
Median Price
$1.136
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Rochester
1+ parts
$0.490
100+ parts
$0.480
1k+ parts
$0.470
10k+ parts
-
Farnell
$0.980
$0.657
$0.481
$0.412
Texas Instruments
$1.292
$0.994
$0.523
Mouser Electronics
$1.940
$1.160
$1.020
$0.951
Element14
$1.960
$1.280
$0.895
DigiKey
$1.990
$1.185
$1.074
Arrow
$0.778
Verical
Digiode
$0.466
Nova Conductors
$0.804
Vyrian
Q Components
Chip Stock
Cyclops Electronics Ltd
Anansix
Bristol Electronics
Inventory MP
Atlantic Semiconductor
Semi Source
Connector Distribution Corp
Right Parts Inc.
Electronics Depot
Ampacity Inc.
$0.416
Semicontronic
$0.406
$0.404
Corphita
$0.441
Parana Technologies
$0.705
$1.738
ChromeModa Solutions
$0.792
$0.649
IDEA Electronic Components Group
$0.713
Continental Prestige Electronics
$0.788
Argo Parts USA
Corohmni
$4.680
Advanced Electronics
$7.071
$6.717
Perfect Parts
QUARKTWIN TECHNOLOGY LTD
Metaverse IC Inc.
Kepictronics
Lixinc
DigiPath Technology Company
$0.714
Assy Fe
Robosynatics
$1.961
Lucentia Tech
Futuretech Components
Speed Components Ltd (Excess)
Authorized Procurement Solutions
GreenTree Electronics
Operational Amplifiers (Op Amps) LMV771MG/NOPB attributes and parameters. Explore more Operational Amplifiers (Op Amps) devices from National Semiconductor
Amplifier Type:
Architecture:
Technology:
Power Supply:
Total Functions:
Sub-Category:
Powered:
Frequency Compensation:
Low-Bias:
Low-Offset:
Micropower:
Wideband:
Programmable Power:
Nominal Unity Gain Bandwidth:
Nominal Common Mode Rejection Ratio (CMRR ):
Input Offset Voltage Limit:
Minimum Voltage Gain:
Nominal Slew Rate:
Peak Bias Current:
Maximum Bias Current (IIB) @25 °C:
Nominal Supply Voltage:
Maximum Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Peak Reflow Temperature:
Reflow Peak Time Limit:
Maximum Supply Current:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Moisture Sensitivity Level (MSL):
Temperature Grade:
Qualified:
JESD-30 Code:
JESD-609 Code:
Packing Method:
Package Code:
Package Shape:
Package Style:
Package Equivalence Code:
LMV771MG/NOPB Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
1554216002
Molex
WIRE AND CABLE;
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
Micropac Industries
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
Secos
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
LM7805CT/NOPB
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
INA240A2QDRQ1
Texas Instruments' INA240A2QDRQ1 is an Operational Amplifier with 25uV Max Input Offset Voltage, 132dB CMRR, and 400kHz Unity Gain Bandwidth. Ideal for automotive applications due to AEC-Q100 screening, it operates from -40°C to 125°C with a supply voltage of 5V.
LMV358IPT
STMicroelectronics
LMV358IPT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 6000 uV and a nominal common mode reject ratio of 95 dB. It operates at a supply voltage of 5 V, making it suitable for automotive applications requiring micropower amplification in compact spaces. This BICMOS technology-based op amp features low bias current and high unity gain bandwidth, ideal for precision signal processing in harsh environments.
TS912IDT
TS912IDT by STMicroelectronics is a CMOS Operational Amplifier with 2 functions, offering low-bias and micropower features. It has a max input offset voltage of 12000 uV, operates at temperatures ranging from -40 to 125 °C, and is ideal for automotive applications due to its compact size and high common mode reject ratio of 70 dB.
OPA2314AIDRBR
OPA2314AIDRBR by Texas Instruments is a CMOS operational amplifier with a max input offset voltage of 2500 uV and a max average bias current of 0.0006 uA. It is commonly used in automotive applications due to its low-bias, micropower, and small outline package.
OPA2320AIDGKT
OPA2320AIDGKT by Texas Instruments is a CMOS operational amplifier with low-offset and low-bias features. It offers a max input offset voltage of 150uV, nominal unity gain bandwidth of 20MHz, and operates at temperatures ranging from -40 to 125°C. Ideal for automotive applications due to its compact size and high common mode rejection ratio.
INA117KU
INA117KU by Texas Instruments is an operational amplifier with 1000uV max input offset voltage, 80dB common mode reject ratio, and 2V/us min slew rate. Ideal for industrial applications requiring precise signal amplification in a compact package.
LM2904DT
LM2904DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV and max average bias current of 0.2 uA. It operates at a nominal voltage of 5V, making it suitable for automotive applications due to its temperature grade and small outline package style. With a min slew rate of 0.3 V/us and frequency compensation, it offers high performance in various signal processing tasks.
OPA170AIDBVR
OPA170AIDBVR by Texas Instruments is a micropower operational amplifier with low-bias current and high common mode rejection ratio. It operates at a wide temperature range of -40 to 125°C, making it suitable for automotive applications. With a unity gain bandwidth of 1200 kHz and compact dimensions of 2.9mm x 1.6mm x 1.45mm, it is ideal for space-constrained designs requiring precision amplification.
LM358QT
LM358QT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV and a nominal common mode reject ratio of 60 dB. It operates on a supply voltage of +-1.5/+-15/3/30 V, making it suitable for applications requiring precise signal amplification in commercial temperature environments. This small outline package with surface mount capability is ideal for compact electronic designs where low bias current and high voltage gain are essential.
LM324AN
Motorola
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
INA2132UA
Texas Instruments' INA2132UA is a dual operational amplifier with 90 dB CMRR and 300 kHz unity gain bandwidth. Ideal for industrial applications, it operates from -40 to 85 °C with micropower consumption of 0.185 mA. Its small outline package makes it suitable for surface mount designs.
LMC6482IMM/NOPB
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
JM38510/13503BGA
Analog Devices
JM38510/13503BGA by Analog Devices is a military-grade operational amplifier with 8 terminals. It features a max input offset voltage of 60 uV, nominal voltage of ±15 V, and unity gain bandwidth of 5 MHz. Ideal for applications requiring high precision and reliability in extreme temperatures from -55 to 125°C.
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358AN
LM358AN by Texas Instruments is an Operational Amplifier with 2 functions. It has a Max Input Offset Voltage of 5000 uV and Nominal Common Mode Reject Ratio of 85 dB. Widely used in voltage-feedback applications due to its high Min Voltage Gain of 15000 and Unity Gain Bandwidth of 1000 kHz.
OPA192IDGKR
OPA192IDGKR by Texas Instruments is an Operational Amplifier with low-offset and low-bias features. It has a max input offset voltage of 25uV, nominal unity gain bandwidth of 10MHz, and operates in automotive temperature grade. Ideal for precision applications requiring high common mode rejection ratio and low bias current consumption.
LM324D-T
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
OPA2134UAE4
OPA2134UAE4 by Texas Instruments is an operational amplifier with a max input offset voltage of 2000 uV and a min slew rate of 15 V/us. It is commonly used in industrial applications due to its low-bias current, high common mode reject ratio, and wide temperature range (-40 to 85 °C). The op amp comes in a small outline package with dual terminals and is suitable for surface mount assembly.
TL074CD
LM358D
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LMV771MGX/NOPB
LMV771MG/NOPB
LMV771MG/NOPB by Texas Instruments is a micropower operational amplifier with low-bias current and voltage-feedback architecture. It features a max input offset voltage of 1000 uV, nominal unity gain bandwidth of 3500 kHz, and operates at temperatures ranging from -40 to 125 °C. Ideal for automotive applications due to its small outline package and high common mode rejection ratio.
LMV797MM/NOPB
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: RECTANGULAR;
LMV797MM/NOPB by Texas Instruments is an Operational Amplifier with a Max Input Offset Voltage of 1650uV, Nominal Voltage of 2.5V, and Min Slew Rate of 6V/us. This Op Amp is ideal for automotive applications due to its low-bias current, high common mode rejection ratio, and compact package style.
LMV722MMX/NOPB
LMV722MMX/NOPB by Texas Instruments is a dual operational amplifier with 2 functions. It features a max input offset voltage of 3000 uV and nominal voltage of 5 V, making it ideal for industrial applications requiring precise signal amplification. With a small outline package style and surface mount capability, this BICMOS technology-based op amp offers high performance in compact designs.
LMV796MFX/NOPB
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR;
LMV796MF/NOPB
OPERATIONAL AMPLIFIER; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: TSOP; Package Shape: RECTANGULAR; Maximum Supply Voltage Limit: 6 V;
LMV771MGX
LMV771MGX by Texas Instruments is a micropower operational amplifier with low bias current and high common mode rejection ratio. It operates on a supply voltage of 2.7-5V, making it suitable for automotive applications. With a unity gain bandwidth of 3.5MHz, this op amp is ideal for precision signal conditioning in compact designs.
LMV772MMX/NOPB
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
LMV771MG
LMV792MM/NOPB
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: SQUARE;
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 10; Package Code: TSSOP; Package Shape: RECTANGULAR;
LMV772MMX
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved