Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Median Price
$0.590
Lifecycle Status
Suppliers In-Stock
55
In-Stock Inventory
1k+
Rochester
1+ parts
-
100+ parts
$0.579
1k+ parts
$0.480
10k+ parts
$0.428
Verical
$0.601
Freelance Electronics
$0.357
$0.429
$0.354
Voyager Components
$0.410
Digiode
$0.450
Component Electronics Inc.
$0.770
$0.580
$0.500
Forefront Electronics and Design
$1.230
Chip Stock
ComSIT Distribution GmbH
Electronics Depot
Vyrian
Electronic Expediters
ACDS - Activité Composants Distribution Service
Bristol Electronics
EMSNET
Component Sense
Elcom Components
Anansix
Connector Distribution Corp
Right Parts Inc.
Resion
LIBRA Elektronik GmbH
QIE Inc.
Atlantic Semiconductor
LWI Electronics Inc
Inland Empire Components Inc.
Prism Electronics
Whistler Technology
Dan-Mar Components
Lighthouse Electronics, Inc.
Pegasus Components GmbH
Ack Elektronik San.Tic.Ltd.Sti
Zilex Electronics Inc.
Mentor Electronics Marketing, LLC
Semi Source
R&J Components
Speed Components Ltd
A2Z Electronics, Inc.
Q Components
MRC Electronics
PC Components Company LLC
Mil-Aero Solutions, Inc.
Fibra_Brandt Electronic GMBH
Sunrise Surplus Inc.
Inventory MP
Microfarads
Avant Electronics Limited
First Choice Components Inc.
Holdelec - ElecDif-Pro
Lantek
MISTER SPROCKETS
Sinequanon
Nova Conductors
Legend Electronics Inc.
Ashlea Components Ltd
Semicontronic
$0.403
$0.393
$0.391
Ampacity Inc.
Corphita
$0.427
Corohmni
$4.049
Parana Technologies
$8.651
$803.358
$7.786
DigiPath Technology Company
$9.526
ChromeModa Solutions
$9.720
$7.970
IDEA Electronic Components Group
$9.234
$8.748
Kepictronics
Continental Prestige Electronics
Lixinc
Perfect Parts
Alle Elektronik GmbH
Argo Parts USA
Authorized Procurement Solutions
Assy Fe
A-Plus Industry Inc.
GreenTree Electronics
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Bastille Electronics
Amble Industries
Fixed Regulators - Positive Single Output Standard LM78L12ACM attributes and parameters. Explore more Fixed Regulators - Positive Single Output Standard devices from National Semiconductor
Adjustability:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
LM78L12ACM Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
NSN
5962-01-381-2490, 5962013812490
NIIN
013812490
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
M39029/58-360
Positronic Industries
CONNECTOR ACCESSORY; MIL-Connector Accessory Name: CONTACT; DIN Conformity: NO; National Stock Number (NSN): 5999004733551; Mating Contacts: M39029/56-348, M39029/57-354; Contact Type: CRIMP REAR RELEASE;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
1N4148
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 175 Cel; Maximum Reverse Recovery Time: .004 us; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V;
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
Toshiba
LL4148
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
Good-ark Electronics
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Transys Electronics
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
Micro Commercial Components
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
LM323KSTEEL/NOPB
Texas Instruments
LM323KSTEEL/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 3A. It operates b/w 0-125°C, making it suitable for various applications requiring stable power supply in a compact flange mount package. With low load and line regulation percentages, it ensures reliable performance in diverse electronic devices.
MC7815CT
Samsung
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Maximum Output Current-1: 1 A;
MC78M05BDTRK
Motorola
MC78M05BDTRK by Motorola is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. Operating temperature ranges from -40 to 125°C, making it suitable for various electronic applications requiring stable power supply in compact designs.
MC7815ACTG
MC7815ACTG by Onsemi is a BIPOLAR fixed positive single output standard regulator with 15V nominal output voltage. It operates in temperatures ranging from 0 to 125°C, suitable for applications requiring stable voltage supply up to 1A current. The through-hole package style and matte tin terminal finish make it ideal for flange mount installations.
UA78M05IDCYRG3
UA78M05IDCYRG3 by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact form factor. With surface mount capability and small outline package style, it offers efficient power management solutions for different devices.
NJM78L12UA-(TE2)
NISSHINBO MICRO DEVICES INC
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: FLAT; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; JESD-609 Code: e6;
MC78M05BDTRKG
MC78M05BDTRKG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic applications requiring stable power supply. The surface-mount package style and small outline design enhance its versatility in compact devices.
LM78L05ACZ/T4
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Output Voltage-1: 5.25 V; Maximum Output Current-1: .1 A; Moisture Sensitivity Level (MSL): 1;
RHFL4913KP501
STMicroelectronics
STMicroelectronics' RHFL4913KP501 is a fixed positive single output standard regulator with 5V nominal output voltage and 1A max output current. It operates in temperatures ranging from -55 to 125°C, making it suitable for various applications requiring stable voltage regulation in harsh environments. The package style is flatpack with ceramic and metal-sealed cofired body material, ensuring durability and reliability in radiation-prone settings up to 300k Rad(Si).
NCV7805BDTRKG
NCV7805BDTRKG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. Operating temperature ranges from -40 to 125°C, making it suitable for automotive applications requiring stable voltage regulation in a compact package. The device features AEC-Q100 screening level and is designed for surface mount installation.
MC78L18ACPXA
Fairchild Semiconductor
Fairchild Semiconductor's MC78L18ACPXA is a fixed positive single output standard regulator with an output voltage of 18V and max current of 0.1A. It operates within a temperature range of 0-125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact cylindrical package.
L7812CV-DG
L7812CV-DG by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 12V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits. The package style is flange mount with through-hole terminals for easy installation.
UA78M05QDCYRG4Q1
UA78M05QDCYRG4Q1 by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.5A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic applications requiring stable power supply in compact designs. The package style is small outline, ideal for space-constrained PCB layouts.
MC78L24ACP
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-92; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 40 V; Maximum Voltage Tolerance: 5 %;
L7812ABV-DG
L7812ABV-DG by STMicroelectronics is a fixed positive single output standard regulator with a nominal output voltage of 12 V and max load regulation of 0.1%. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage outputs up to 1 A. The package style is flange mount with through-hole terminals for easy installation.
TPS709B33DBVR
TPS709B33DBVR by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 3.3V and max output current of 0.15A. It operates within a temperature range of -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
MAQ5283-5.0YME-TR
Microchip Technology's MAQ5283-5.0YME-TR is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.15A. Operating temperature ranges from -40 to 125°C, making it suitable for automotive applications requiring high reliability under harsh conditions. Its small outline package with gull wing terminals offers space-saving benefits in compact designs.
UA78L05AID
UA78L05AID by Texas Instruments is a fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and max output current of 0.1A. This device is commonly used in applications requiring stable voltage regulation in compact electronic systems.
MC7812BDTG
MC7812BDTG by Onsemi is a fixed positive single output standard regulator with 12V nominal output voltage and 1A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline with gull wing terminals, ideal for surface mount assembly.
LM78M05CDTX
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LM7805CT by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and offers excellent line/load regulation for various electronic applications.
LM7805CT/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
LM78L05ACMX/NOPB
LM78L05ACMX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 1.6V, and can handle input voltages up to 30V making it ideal for various electronic applications requiring stable power supply.
LM7805MPX/NOPB
LM7805MPX/NOPB by Texas Instruments is a fixed positive single output standard regulator with a nominal output voltage of 5V and max output current of 1.5A. It operates in an input voltage range of 7.5V to 30V, making it ideal for various applications requiring stable power supply such as consumer electronics and industrial automation systems. The package style is small outline with gull wing terminals, suitable for surface mount assembly in compact designs.
LM7805MP/NOPB
LM7805MP/NOPB by Texas Instruments is a fixed positive single output standard regulator with a nominal output voltage of 5V and max output current of 1.5A. It is commonly used in applications requiring regulated power supply, such as electronic devices and circuits.
LM7805SX/NOPB
LM7805SX/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a dropout voltage of 2V, and can handle input voltages from 7.5V to 30V. This bipolar technology regulator in gull wing package is ideal for various electronic applications requiring stable power supply.
LM7805ACT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 4 %; Terminal Finish: MATTE TIN;
LM7805ACT by Onsemi is a fixed positive single output standard regulator with 1A max output current. It offers a nominal 5V output voltage, 4% voltage tolerance, and operates b/w 0-125°C. Ideal for applications requiring stable voltage supply in electronic circuits.
LM7805S/NOPB
LM7805S/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max output current of 1.5A. It operates within a temperature range of 0-125°C, making it suitable for various electronic applications requiring stable voltage regulation in a compact package.
LM78L05ACM
LM78L05ACM by Texas Instruments is a fixed positive single output standard regulator with 5V nominal output voltage, 0.1A max output current, and 125°C max operating temperature. It is used in applications requiring precise voltage regulation in compact spaces due to its small outline package style and surface mount capability.
LM78L05ACM/NOPB
LM78L05ACM/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 0.1A. It operates b/w 0-125°C, has a package style of small outline, and is suitable for applications requiring stable voltage regulation in various electronic devices.
LM7812CT
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved