Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BRUSH DC MOTOR CONTROLLER; Temperature Grade: INDUSTRIAL; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Digiode
One Stop Electronics
$2.500
AZTECH Wire
$7.839
Parana Technologies
$10.385
$10.899
DigiPath Technology Company
$11.436
IDEA Electronic Components Group
$11.669
$11.086
$10.502
ChromeModa Solutions
$9.569
Corphita
Motion Control ICs LM629M-6X attributes and parameters. Explore more Motion Control ICs devices from National Semiconductor
Other IC type:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Maximum Supply Current (Isup):
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
LM629M-6X Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDLL4148
National Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
SMBJ18CA
Sensitron Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
LM2931Z-5.0G
Onsemi
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
Hi-tron Semiconductor
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
CC0603KRX7R9BB104
Yageo
Yageo's CC0603KRX7R9BB104 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
Good-ark Electronics
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
1N4148WS
Rochester Electronics
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
FSB50760SFS
Fairchild Semiconductor
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; No. of Functions: 1; Qualification: Not Qualified;
L6235D013TR
L6235D013TR by STMicroelectronics is a motion control IC with a nominal voltage of 48V. It is a brushless DC motor controller with a max output current of 5.6A. This IC is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
A4980KLPTR-T
Allegro MicroSystems
A4980KLPTR-T by Allegro MicroSystems is a motion control IC with a rectangular package and a small outline. It operates at a nominal voltage of 3.3V and has a max operating temperature of 150°C. This IC is commonly used as a stepper motor controller in automotive applications.
PMCT8316Z0TRGFR
PMCT8316Z0TRGFR by Texas Instruments is a Motion Control IC with 40 terminals, operating voltage range of 4.5V to 35V, and max output current of 8A. Ideal for automotive applications due to its temperature grade and brushless DC motor controller type. Package style includes chip carrier, heat sink/slug, and very thin profile design.
FNB34060T6
FNB34060T6 by Onsemi is a Motion Control IC with 27 terminals, operating b/w -40 to 125°C. It features a nominal voltage of 15V and max supply current of 6mA. Ideal for automotive applications as a Brushless DC Motor Controller in a rectangular package style.
IRMCF188TY
International Rectifier
BRUSHLESS DC MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 64; Package Code: LFQFP; Package Shape: SQUARE; Surface Mount: YES;
DRV8323SRTAR
DRV8323SRTAR by Texas Instruments is a Motion Control IC with 40 terminals, operating voltage range of 6-60V, and max output current of 1A. Ideal for automotive applications, it features a temp range of -40 to 125°C and terminal finish of Ni/Pd/Au. Package style includes chip carrier and heat sink/slug in a square shape.
DRV8244SQRYJRQ1
Texas Instruments' DRV8244SQRYJRQ1 is a Motion Control IC with 16 terminals, operating b/w -40 to 125°C. It features a max output current of 21A and supports supply voltages from 4.5V to 35V. Ideal for applications requiring a Half Bridge Brush DC Motor Controller in automotive environments (AEC-Q100).
MP6540HGU-Z
Monolithic Power Systems
BRUSHLESS DC MOTOR CONTROLLER;
FSB50450AS
AC MOTOR CONTROLLER; No. of Terminals: 23; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Seated Height: 3.5 mm; JESD-30 Code: R-XDMA-G23;
PS21964-4S
Powerex
AC MOTOR CONTROLLER; No. of Terminals: 24; Package Shape: RECTANGULAR; Surface Mount: NO; Package Style (Meter): MICROELECTRONIC ASSEMBLY; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED;
TDA1085C
TDA1085C by Onsemi is a Motion Control IC with 16 terminals, operating voltage range of 15-16V. It has a max output current of 0.2A and operates b/w -10 to 120°C. Widely used as a Universal Motor Controller in various applications due to its compact size and through-hole terminal form.
LB11696V-TLM-E
LB11696V-TLM-E by Onsemi is a Motion Control IC with 30 terminals, operating at -20 to 100°C. It has a supply voltage range of 8-17 V and can handle a max output current of 0.03 A. Ideal for Brushless DC Motor Controllers, this IC is compact (9.75x5.6 mm) and surface-mountable for various motion control applications.
DRV8210DSGR
DRV8210DSGR by Texas Instruments is a Motion Control IC with 8 terminals, operating voltage range of 1.65V to 5.5V, and max output current of 1.76A. Ideal for automotive applications due to its nickel palladium gold finish, -40°C to 125°C temperature range, and no-lead terminal form.
DRV10866DSCR
DRV10866DSCR by Texas Instruments is a motion control IC with a square package and a small outline, heat sink/slug, very thin profile. It operates at a nominal voltage of 3V and has a max output current of 0.85A. This IC is commonly used as a brushless DC motor controller in industrial applications.
A3987SLPTR-T
Allegro MicroSystems' A3987SLPTR-T is a Motion Control IC with 24 terminals, operating voltage of 3-50V, and output current up to 1.5A. Ideal for stepper motor control applications due to its compact size, NMOS technology, and dual terminal position.
DRV8313RHHR
Texas Instruments DRV8313RHHR is a Motion Control IC with 36 terminals, operating voltage range of 8-60V. Ideal for automotive applications, it offers a max output current of 3A and operates in temperatures from -40 to 125°C. The IC features a compact square package style suitable for surface mount assembly.
DRV8323RSRGZT
DRV8323RSRGZT by Texas Instruments is a Motion Control IC with 48 terminals, suitable for Brushless DC Motor control. It operates b/w -40 to 125°C, supports supply voltages from 6V to 60V, and has a max output current of 1A. The package style is chip carrier with very thin profile, making it ideal for automotive applications.
MC33887APVW/R2
Freescale Semiconductor
STEPPER MOTOR CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Code: HSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MC33035P
MC33035P by Onsemi is a 24-terminal motion control IC with a supply voltage range of 10-30V. It operates b/w -40 to 85°C, suitable for industrial applications. This bipolar technology brushless DC motor controller has a max output current of 0.01A and peak reflow temperature of 235°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved