Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 8; Package Code: HVSSON; Package Shape: SQUARE;
Median Price
$0.675
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Chip Stock
1+ parts
-
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Anansix
Bristol Electronics
$0.468
R&J Components
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Ack Elektronik San.Tic.Ltd.Sti
Odintec Ltd.
Parana Technologies
$1.079
$1.927
DigiPath Technology Company
$1.188
$1.093
IDEA Electronic Components Group
$1.212
$1.091
ChromeModa Solutions
$0.994
AZTECH Wire
$7.530
One Stop Electronics
$8.800
Lixinc
Alle Elektronik GmbH
Corphita
Kepictronics
Assy Fe
Futuretech Components
Microchip USA
Audio & Video Amplifiers LM4871LD attributes and parameters. Explore more Audio & Video Amplifiers devices from National Semiconductor
Nominal Bandwidth:
General IC Type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Channels:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Nominal Output Power:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current:
Maximum Supply Voltage (Vsup):
Minimum Supply Voltage (Vsup):
Surface Mount:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
LM4871LD General Purpose ICs trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.33.00.01
SB
8542.33.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
Freescale Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Motorola
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; No. of Outputs: 1; Package Equivalence Code: SIP3,.1TB;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
LM317T/NOPB
Texas Instruments
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
1N4148WT
Jiangsu Changjiang Electronics Technology
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
EU2B-YS3203F
Idec
ROTARY SWITCH;
Excel (Suzhou) Semiconductor
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
U.FL-R-SMT-1(10)
Hirose Electric
U.FL-R-SMT-1(10) by Hirose Electric is a RF connector with 50 ohm impedance, 0.05 dB insertion loss, and 8 GHz operating frequency. Ideal for board mounting in commercial applications, it features gold termination finish, liquid crystal polymer insulator, and 200VAC dielectric voltage resistance.
BAV99+
Multicomp Pro
BAV99+ by Multicomp Pro is a series connected diode with 0.2A output current and 75V peak reverse voltage. Its 0.006us reverse recovery time makes it ideal for high-speed applications. This small outline rectifier diode is designed for surface mount installation in electronic circuits.
TPA2006D1DRBR
TPA2006D1DRBR by Texas Instruments is an audio amplifier IC with 1.45W output power, 20dB gain, and 0.02kHz bandwidth. It operates at -40 to 85°C, suitable for industrial applications requiring low noise figure of 97dB. With a compact square chip carrier package style, it's ideal for space-constrained designs needing high-quality audio amplification.
TDA1521AU
NXP Semiconductors
The NXP Semiconductors TDA1521AU is a 2-channel audio amplifier with 8W output power and 30dB gain. It has a harmonic distortion of 10% and operates at supply voltages b/w 7V to 20V. This rectangular package IC is ideal for audio applications requiring high-quality amplification in a compact form factor.
SSM2166S
Analog Devices
Analog Devices' SSM2166S is a 14-terminal audio preamplifier with a gain of 20 dB, operating at temperatures from -40 to 85°C. It features a supply voltage range of 4.5-5.5V and nominal bandwidth of 0.02 kHz, making it ideal for industrial audio applications requiring precise amplification in compact spaces.
TDA7293HS
STMicroelectronics
TDA7293HS by STMicroelectronics is a Class AB audio amplifier with 100W output power, 10% harmonic distortion, and 30dB gain. It operates b/w 0-70°C, requires +-40V power supplies, and has a max supply current of 100mA. Ideal for audio & video applications requiring high-quality amplification in commercial temperature environments.
LM4871MX/NOPB
LM4871MX/NOPB by Texas Instruments is an audio amplifier IC with 3W output power, 10% harmonic distortion, and 5V supply voltage. It is used in industrial applications requiring small outline package style for audio amplification.
NE592D8R2G
Onsemi
NE592D8R2G by Onsemi is a video amplifier IC with 8 terminals, operating at +-6V. It has a bandwidth of 40 kHz and consumes 27mA max supply current. Ideal for audio/video applications due to its small outline package and commercial temperature grade suitability.
TAS5111ADAD
TAS5111ADAD by Texas Instruments is an audio amplifier with 10% harmonic distortion, 93W output power, and 32 terminals. It operates b/w 0-70°C and supports supply voltages of 3-29.5V. Ideal for applications requiring high-quality audio amplification in a compact package.
LM4995SDX/NOPB
LM4995SDX/NOPB by Texas Instruments is a square-shaped audio amplifier IC with 8 terminals and a power output of 1.25W. Operating b/w -40 to 85°C, it requires a supply voltage of 2.4-5.5V and has a bandwidth of 0.02 kHz. Ideal for industrial applications requiring compact, low-power audio amplification in surface-mount setups.
FHP3230IMU8X
Rochester Electronics
VIDEO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SSOP; Package Shape: SQUARE;
MAX98300ETA+T
Analog Devices' MAX98300ETA+T is a Class D audio amplifier with 2.6W output power, suitable for industrial applications. It operates b/w -40 to 85°C, has a small outline package style, and requires a min supply voltage of 2.6V. Ideal for audio amplification in compact devices due to its very thin profile and surface-mount capability.
PTAS6584QPHDRQ1
PTAS6584QPHDRQ1 by Texas Instruments is a 64-terminal audio amplifier with 200W output power, 111dB noise figure, and 4 channels. It operates b/w -40°C to 125°C, suitable for automotive applications due to AEC-Q100 screening and quad terminal position. The package is a flatpack with heat sink/slug in a square shape made of plastic/epoxy material.
TPA751DRG4
TPA751DRG4 by Texas Instruments is an audio amplifier IC with 8 terminals, operating at -40 to 85°C. It offers 0.35W output power with 0.5% harmonic distortion and a bandwidth of 0.02 kHz. Ideal for audio applications requiring small outline packages and low power consumption.
MAX9737ETG+
MAX9737ETG+ by Analog Devices is a class D audio amplifier with a power supply of 12V. It has a nominal output power of 13W and operates in an industrial temperature range (-40 to 85°C). This surface mount chip carrier package is suitable for audio and video amplification applications.
2206
Unisonic Technologies
AUDIO AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 12; Package Code: DIP; Package Shape: RECTANGULAR;
TPA751DGNRG4
TPA751DGNRG4 by Texas Instruments is an audio amplifier IC with 0.5% harmonic distortion, 3/5V power supplies, and 0.7W nominal output power. It is a small outline package suitable for industrial applications requiring high-quality audio amplification in a compact form factor.
SSM2166SZ
SSM2166SZ by Analog Devices is a surface mount audio preamplifier with a gain of 20 dB. It operates at a min supply voltage of 4.5 V and has a max operating temperature of 85°C. This IC is commonly used in audio and video amplifiers for industrial applications.
LME49811TB
National Semiconductor
AUDIO AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 15; Package Code: ZIP; Package Shape: RECTANGULAR;
TPA2001D1PWRG4
TPA2001D1PWRG4 by Texas Instruments is an audio amplifier with 1W output power, 23.5dB gain, and 1% harmonic distortion. It operates at -40 to 85°C, requires 2.5-5.5V supply voltage, and has a small outline package suitable for industrial applications.
PAM8304ASR
PAM8304ASR by Diodes Inc. is an audio amplifier IC with 3W output power, 10% distortion, and 18dB gain. It operates b/w -40 to 85°C, suitable for industrial applications. With a small outline package and thin profile, it's ideal for compact audio systems.
LM3876T
LM3876T by Texas Instruments is a 1-channel audio amplifier with a nominal output power of 56W. It has a low harmonic distortion of 0.1% and operates within a temperature range of -20 to 85°C. This amplifier is commonly used in audio and video applications for high-quality sound amplification.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved