Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Output Current-1: 1 A; Package Shape: RECTANGULAR;
Median Price
$2.500
Lifecycle Status
Suppliers In-Stock
24
In-Stock Inventory
1k+
Texas Instruments
1+ parts
$2.112
100+ parts
$1.745
1k+ parts
$0.943
10k+ parts
-
Chip1Stop
$2.200
DigiKey
$2.800
$1.818
$1.559
$1.440
Mouser Electronics
$1.710
$1.580
$1.430
Element14
$3.118
$2.193
$1.631
Farnell
$3.830
$2.300
$2.030
Arrow
$1.786
$1.494
$1.171
Verical
$1.493
$1.395
$1.254
Nova Conductors
$1.449
Digiode
$1.824
TME
$2.450
$1.690
Mobius Materials
$5.710
$4.580
Vyrian
Chip Stock
Anansix
Cogito LLC
Bristol Electronics
Dark Horse Electronics
Sogenti Electronics
Holdelec - ElecDif-Pro
EZ Electronic Parts
Connector Distribution Corp
Right Parts Inc.
ACDS - Activité Composants Distribution Service
Argo Parts USA
$1.203
Aranea Global
$1.420
$1.364
Corohmni
$1.509
Semicontronic
$1.520
$1.482
$1.474
Advanced Electronics
$1.554
$1.477
Modulus Dynamics
$1.609
$1.593
$1.544
Corphita
$1.728
Continental Prestige Electronics
$2.240
$1.620
Parana Technologies
$3.851
$4.336
DigiPath Technology Company
$4.240
$3.901
ChromeModa Solutions
$4.327
$3.548
IDEA Electronic Components Group
$3.894
CPlus Electronics
QUARKTWIN TECHNOLOGY LTD
Perfect Parts
A-Z Elektronik GmbH
Robosynatics
$1.479
Lucentia Tech
Alle Elektronik GmbH
Authorized Procurement Solutions
GreenTree Electronics
Speed Components Ltd (Excess)
Metaverse IC Inc.
Futuretech Components
Assy Fe
Adjustable Regulators - Positive Single Output LDO LM2941S/NOPB attributes and parameters. Explore more Adjustable Regulators - Positive Single Output LDO devices from National Semiconductor
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation (%/V):
Maximum Load Regulation (%):
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width:
LM2941S/NOPB Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Assembly/Origin - Mult Devices 12/Apr/2018
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
4554
Jw Miller Magnetics
Other Semiconductors;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MBR0530T1G
Onsemi
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
Weitronic Enterprise
Digitron Semiconductors
M24308/2-1F
TE Connectivity
TE Connectivity's M24308/2-1F D-Sub Connector features 9 contacts, 2 rows, and a shell size of 1/E. With a rated current of 7.5A, it operates b/w -55°C to 125°C. Ideal for cable mounting applications, this connector has a steel shell with cadmium finish and uses crimp termination for female contact pins.
Rectron
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
CRCW040210K0FKED
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
OHN3020U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LT3008MPTS8#TRMPBF
Analog Devices
Analog Devices' LT3008MPTS8#TRMPBF is an adjustable positive single output LDO regulator with a max output voltage of 44.5V and max dropout voltage of 0.5V, suitable for applications requiring precise voltage regulation in compact spaces. Operating temperature range from -55°C to 125°C makes it ideal for various electronic devices needing stable power supply. This surface-mount device features a small outline package with gull wing terminals, making it easy to integrate into PCB designs while ensuring reliable performance.
LT1763IS8#PBF
LT1763IS8#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5 A and a max dropout voltage of 0.45 V, making it suitable for applications requiring precise voltage regulation in compact spaces. With a wide operating temperature range from -40°C to 125°C and a small outline package style, this regulator is ideal for use in various electronic devices where space and temperature constraints are critical.
LT3014HVIDD#PBF
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Pitch: .5 mm;
LM1117IMP-ADJ/NOPB
LM1117IMP-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.8A and a dropout voltage of 1.2V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs with limited space constraints.
PTPS7A5201RPSR
PTPS7A5201RPSR by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 2A and a max dropout voltage of 0.275V. It operates in temperatures ranging from -55°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
TPS7A4001DGNT
TPS7A4001DGNT by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 90V and a max dropout voltage of 1.3V, suitable for applications requiring precise voltage regulation in a compact form factor. Operating temperature ranges from -40 to 125°C, making it ideal for various electronic devices where stable power supply is crucial. With surface mount capability and small outline package style, it offers flexibility in design while ensuring efficient performance.
TPS76201DBVRG4
TPS76201DBVRG4 by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 5.5V and a max output current of 0.1A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
TPS73001DBVRG4
TPS73001DBVRG4 by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 5.5V and a max dropout voltage of 0.21V, suitable for applications requiring precise voltage regulation in compact spaces. Operating temperature ranges from -40 to 125°C, making it ideal for various electronic devices needing stable power supply. Package style is small outline, low profile, shrink pitch with gull wing terminals for surface mount assembly.
MIC61300YML-TR
MIC61300YML-TR by Microchip Tech is an adjustable positive single output LDO regulator with max output current of 3A and dropout voltage of 0.35V. Ideal for applications requiring precise voltage regulation in compact spaces, it operates b/w -40 to 125°C, making it suitable for various electronic devices. Its small outline package with a very thin profile and no-lead terminals offers flexibility in design and assembly processes.
MIC29302AWD
MIC29302AWD by Microchip Technology is an adjustable LDO regulator with a max output current of 3A and dropout voltage of 0.8V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LT1965IDD#PBF
LT1965IDD#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 1.1A and a max dropout voltage of 0.49V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
TPS7A8300RGRT
TPS7A8300RGRT by Texas Instruments is an adjustable LDO regulator with a max output current of 2A and a dropout voltage of 0.2V, suitable for applications requiring precise voltage regulation in tight spaces. With a wide operating temperature range from -40°C to 125°C, it is ideal for use in various electronic devices where space and efficiency are crucial factors. The package style includes chip carrier and heat sink/slug options, making it versatile for different design requirements.
TPS78601DCQRG4
TPS78601DCQRG4 by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1.5A and operating temperature range from -40 to 125°C. It features a min input voltage of 2.7V, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LT1086CM#TRPBF
LT1086CM#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 1.5 A and a max dropout voltage of 1.5 V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
LT1529IQ#PBF
LT1529IQ#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 3A. It features a max dropout voltage of 0.95V and a max load regulation of 0.82%. Ideal for applications requiring precise voltage regulation in compact spaces, such as portable electronic devices.
LT1085CT#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Adjustability: ADJUSTABLE; JESD-609 Code: e3;
NCV4276CDTADJRKG
NCV4276CDTADJRKG by Onsemi is an adjustable positive single output LDO regulator with a max output voltage of 20V and a max dropout voltage of 0.5V. It operates in temperatures ranging from -40 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.
LM1117S-ADJ/NOPB
LM1117S-ADJ/NOPB by Texas Instruments is an adjustable LDO regulator with a max output current of 0.8A and dropout voltage of 1.3V, suitable for applications requiring precise voltage regulation in a compact package. With a wide operating temperature range from 0 to 125°C, it offers stable performance in various environments while maintaining low load and line regulations at ±0.4% and ±0.016%/V respectively.
LD1117ADT-TR
STMicroelectronics
STMicroelectronics LD1117ADT-TR is an adjustable positive single output LDO regulator with a max output current of 1A and dropout voltage of 1.3V. Ideal for applications requiring precise voltage regulation in compact spaces, operating at temperatures ranging from 0 to 125°C. Surface mountable in small outline package style, making it suitable for various electronic devices.
MAX38904BATD+T
Maxim Integrated
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 14; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Time At Peak Reflow Temperature (s): 30; Operating Temperature (TJ-Min): -40 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM2931CDR2G
LM2931CDR2G by Onsemi is an adjustable positive single output LDO regulator with a max output voltage of 29.5V and a dropout voltage of 0.6V. It operates at temperatures up to 150°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM2941SX/NOPB
LM2941SX/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a dropout voltage of 1V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Moisture Sensitivity Level (MSL): 3; Terminal Finish: Matte Tin (Sn);
LM2941S/NOPB
LM2941S/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a dropout voltage of 1V. It is commonly used in applications requiring stable voltage regulation, such as power supplies and battery chargers.
LM2941LDX/NOPB
LM2941LDX/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a dropout voltage of 1V. It operates b/w -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in tight spaces. The package style is small outline with a very thin profile, ideal for surface mount designs.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Technology: BIPOLAR; No. of Functions: 1;
LM2941LD/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Length: 4 mm; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE;
LM2941LD/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a dropout voltage of 1V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
LM2941T/NOPB
LM2941T/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a max input voltage of 26V. It features a min dropout voltage of 0.5V, making it suitable for applications requiring stable voltage regulation in temperature-sensitive environments up to 125°C. The package style is flange mount, providing ease of installation and thermal management in various electronic devices.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: THROUGH-HOLE; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation (%): .78 %; Package Shape: RECTANGULAR;
LM2941CSX/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Package Equivalence Code: SMSIP5H,.6,67TB; Maximum Line Regulation (%/V): .032;
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2.8 %; Terminal Pitch: 1.7 mm;
LM2931CS/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Operating Temperature (TJ-Max): 125 Cel; Surface Mount: YES;
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Voltage Tolerance: 5 %; Maximum Line Regulation (%/V): .15;
LM2941SX
LM2941SX by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a max input voltage of 26V. It is commonly used in applications that require voltage regulation, such as power supplies and battery chargers.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Output Voltage-1: 20 V; Package Equivalence Code: SMSIP5H,.6,67TB;
LM2941CT/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: SFM; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 2.8 %; Package Body Material: PLASTIC/EPOXY;
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; No. of Functions: 1; Technology: BIPOLAR;
LM2931CMX/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; No. of Outputs: 1; Operating Temperature (TJ-Max): 125 Cel;
LM2931CSX/NOPB
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Terminal Position: SINGLE; Packing Method: TR;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved