Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Anansix
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Digiode
Corphita
Switching Regulators & Controllers LM2675M-5.0X attributes and parameters. Explore more Switching Regulators & Controllers devices from National Semiconductor
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Nominal Output Voltage:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Qualification:
Maximum Seated Height:
Maximum Supply Current (Isup):
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Technology:
Temperature Grade:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
LM2675M-5.0X Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV304P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
BAV99
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): .715 V; Maximum Operating Temperature: 150 Cel; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .2 A;
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Diotec Semiconductor Ag
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
ULN2803ADWG4
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
1N4148
Frontier Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SS14
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
TPS5430DDAR
TPS5430DDAR by Texas Instruments is a switching regulator with 3A output current, 1.23V min output voltage, and 500kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and pulse width modulation control technique.
TPS5420DG4
TPS5420DG4 by Texas Instruments is a switching regulator with 8 terminals, operating temperature range of -40 to 125°C, and output current up to 2A. Ideal for automotive applications, it features voltage-mode control, PWM technique, and a buck switcher configuration.
LM3150MHE/NOPB
LM3150MHE/NOPB by Texas Instruments is a switching regulator with 14 terminals, operating temperature range of -40 to 125°C, and output current up to 12A. It features hysteric current mode control, push-pull switcher configuration, and supports input voltages from 6V to 42V. Ideal for automotive applications due to its compact size (5x4.4mm) and high switching frequency of up to 1MHz.
LTM4644EY#PBF
Analog Devices
Analog Devices' LTM4644EY#PBF is a 77-terminal switching regulator with a max operating temperature of 125°C. It features current-mode control, pulse width modulation, and a buck switcher configuration. Ideal for automotive applications, this IC has a nominal input voltage of 12V and nominal output voltage of 1.5V, with a max switching frequency of 1300 kHz.
L5972D013TR
STMicroelectronics
STMicroelectronics L5972D013TR is a MOS switching regulator with 3A output current, 280kHz max switching frequency, and voltage-mode control. Ideal for automotive applications, it operates b/w -40 to 125°C with input voltage range of 4.4-36V in a small outline package.
LM2674M-ADJ/NOPB
LM2674M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with max output of 37V, 0.5A current, and 260kHz frequency. Ideal for automotive applications due to its DMOS technology, it operates b/w -40°C to 125°C range and supports input voltages from 6.5V to 40V.
LMZ21700SILT
LMZ21700SILT by Texas Instruments is a switching regulator with max output voltage of 6V, max output current of 0.65A, and max operating temp of 125°C. Ideal for automotive applications due to its compact size, pulse width modulation control technique, and buck switcher configuration.
LT8645SEV#PBF
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 32; Package Code: HQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
LMZ14202HTZE/NOPB
National Semiconductor
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 3; Maximum Time At Peak Reflow Temperature (s): 30;
LM2594MX-ADJ/NOPB
LM2594MX-ADJ/NOPB by Texas Instruments is a switching regulator with max output voltage of 37V, operating temp range -40 to 125°C, and max output current of 0.5A. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and pulse width modulation control technique.
LM2596S-12/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: TO-263; Package Shape: RECTANGULAR; Surface Mount: YES;
LMR16030PDDA
LMR16030PDDA by Texas Instruments is a switching regulator with 3A output current, 1V min output voltage, and 50V max output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design. Features include pulse width modulation control technique and buck switcher configuration.
LT8608EMSE#PBF
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 10; Package Code: HTSSOP; Package Shape: SQUARE; Surface Mount: YES;
LM2675M-5.0/NOPB
LM2675MX-ADJ/NOPB
LM2675MX-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 1A and a max output voltage of 37V. It operates in an automotive temperature grade range from -40°C to 125°C, making it suitable for various automotive applications requiring efficient power management. With a compact small outline package style and pulse width modulation control technique, this DMOS technology-based regulator offers reliable performance in space-constrained environments.
TPS560430YDBVR
TPS560430YDBVR by Texas Instruments is a switching regulator with 0.6A output current, 1V min output voltage, and 2100kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design.
LM3150MH/NOPB
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LT1616ES6#TRPBF
LT1616ES6#TRPBF by Analog Devices is a small outline switching regulator with 6 terminals, operating at 0-70°C. It features a buck switcher configuration, pulse width modulation control technique, and can handle up to 0.85A output current. Ideal for applications requiring efficient power conversion in compact spaces.
LM5007MM/NOPB
LM5007MM/NOPB by Texas Instruments is a switching regulator with a max output voltage of 73V and max output current of 0.5A. It operates in automotive-grade temperatures (-40 to 125°C) making it suitable for automotive applications. With a compact package style, small outline, and thin profile, it is ideal for space-constrained designs.
LM2672M-5.0/NOPB
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved