Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
LM2660MMX by National Semiconductor is a switching regulator with 8 terminals, operating b/w -40 to 85°C. It offers an output voltage range of 5-11V and supports a max current of 0.1A. Ideal for industrial applications requiring a compact, low-power switched capacitor converter with a small outline package.
Median Price
-
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Chip Stock
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Anansix
Digiode
Nova Conductors
AZTECH Wire
$0.590
$0.570
$0.560
$0.540
Ampacity Inc.
$4.500
Corohmni
$24.735
Kepictronics
QUARKTWIN TECHNOLOGY LTD
Continental Prestige Electronics
Argo Parts USA
Alle Elektronik GmbH
Microchip USA
A-Z Elektronik GmbH
Aranea Global
Corphita
The use of plastic/epoxy material provides durability and protection for the components inside, making it a reliable choice for long-term use.
Being surface mountable allows for easy and efficient installation on circuit boards, saving time and space in the overall design.
With a high maximum operating temperature, this regulator can handle a wide range of environmental conditions, ensuring stability and performance in various applications.
The minimum output voltage of 5V ensures compatibility with a wide range of devices and circuits that require consistent power delivery.
The maximum output voltage of 11V offers flexibility in powering different components or systems, making this regulator versatile for various applications.
The nominal input voltage of 5V is a common standard for many electronic devices, ensuring compatibility and easy integration into existing systems.
A high maximum switching frequency allows for efficient power conversion with minimal ripple and noise, contributing to overall system performance and reliability.
CMOS technology offers low power consumption and high noise immunity, making this regulator energy-efficient and reliable in various operating conditions.
Switching Regulators & Controllers LM2660MMX attributes and parameters. Explore more Switching Regulators & Controllers devices from National Semiconductor
Other IC type:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Maximum Output Voltage:
Minimum Output Voltage:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LM2660MMX Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
1N4148
Grande Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Vishay Semiconductors
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Package Shape: RECTANGULAR; Transistor Application: SWITCHING;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
Gec Plessey Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
LL4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Sensitron Semiconductor
SMBJ18CA
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Lite-on Semiconductor
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Renesas Electronics
STM32F103C8T6
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
Micro Commercial Components
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
Thinking Electronic Industrial
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2576T-ADJ
Texas Instruments
LM2576T-ADJ by Texas Instruments is a switching regulator with max output voltage of 37V and max output current of 7.5A. It operates b/w -40 to 125°C, suitable for automotive applications. Control mode is voltage-mode PWM with a switching frequency of up to 63kHz, ideal for buck configuration.
TPS82085SILR
TPS82085SILR by Texas Instruments is a switching regulator with 8 terminals, operating temperature range of -40 to 125°C, and output current up to 3A. Ideal for automotive applications, it offers a max output voltage of 6V and switching frequency of 2800 kHz.
PLM5146QRGYTQ1
SWITCHING CONTROLLER; Screening Level: AEC-Q100;
MC33063ADRJRG4
MC33063ADRJRG4 by Texas Instruments is a switching regulator with 1 function, operating at a max frequency of 100 kHz. It has a small outline package style and is suitable for industrial applications.
LM5575MH/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 16; Package Code: TSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM22675MRX-ADJ/NOPB
Switching Regulator or Controllers; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Finish: MATTE TIN;
LM2671M-ADJ/NOPB
LM2671M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a max output voltage of 37V. It operates in the temperature range of -40 to 125°C, making it suitable for automotive applications. This small outline package has 8 terminals and uses pulse width modulation control technique at a max switching frequency of 400kHz.
SG3525AP013TR
SG3525AP013TR by STMicroelectronics is a 16-terminal switching controller with PWM control mode, operating b/w 0-70°C. It has a max output current of 0.5A and supports a max switching frequency of 500kHz. Ideal for applications requiring voltage-mode control in small outline packages.
LM2594HVM-ADJ/NOPB
LM2594HVM-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 8 terminals, operating from -40 to 125°C. It offers a wide input range of 4.5-60V and output voltage up to 37V at 0.5A max current. Ideal for automotive applications due to its compact size, PWM control technique, and buck switcher configuration.
LM2672M-5.0/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS54361DPRT
TPS54361DPRT by Texas Instruments is a switching regulator with a max output current of 3.5A and max output voltage of 59V, ideal for industrial applications. Operating b/w -40 to 85°C, it features pulse width modulation control mode and a compact square package style suitable for surface mount assembly. With a wide input voltage range from 4.5V to 60V, this device offers efficient power conversion in various electronic systems.
FAN2002MPX
Fairchild Semiconductor
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: HVQCCN; Package Shape: SQUARE; Surface Mount: YES;
EN6347QI
Altera
The EN6347QI by Altera is a voltage-mode switching regulator with a maximum output current of 4A. It has a package shape of rectangular and a terminal finish of matte tin. Its control technique is pulse width modulation and it operates at a temperature range of -40 to 85 degrees Celsius. This IC is suitable for industrial applications that require efficient power regulation.
LT8650SIV#PBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 32; Package Code: HQCCN; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS40055PWPRG4
TPS40055PWPRG4 by Texas Instruments is a voltage-mode switching controller with a max output current of 20A and a max switching frequency of 1MHz. It operates in industrial temperature grades and is suitable for applications requiring precise voltage regulation, such as power supplies for industrial equipment.
LM2575D2T-5R4G
Onsemi
LM2575D2T-5R4G by Onsemi is a 3.2A BUCK switching regulator with VOLTAGE-MODE control, operating from -40 to 125°C. Ideal for automotive applications, it accepts input voltages from 4.75V to 40V and provides a stable output of 3.3V at a max frequency of 63kHz.
MC34063AP1G
MC34063AP1G by Onsemi is a switching regulator with 8 terminals, operating temp of 0-70°C, and max output current of 1.5A. Ideal for voltage-mode control applications in commercial-grade electronics due to its buck-boost configuration and PWM control technique.
LMZ23603TZ/NOPB
LMZ23603TZ/NOPB by Texas Instruments is a switching regulator with 3A output current, 950kHz max switching frequency, and 6V max output voltage. Ideal for industrial applications, it operates b/w -40 to 85°C, with a package size of 10.16mm x 9.85mm x 4.82mm in a small outline style suitable for surface mount assembly.
LM2675M-ADJ
TPS54360DDAR
TPS54360DDAR by Texas Instruments is a switching regulator with a max output current of 3.5A and a max input voltage of 60V, suitable for automotive applications. It operates in current-mode control with a min output voltage of 0.8V and supports pulse width modulation as the control technique. The package style is small outline, making it ideal for space-constrained designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LM2675M-ADJ/NOPB
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
LM2675M-5.0/NOPB
LM2675M-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 5V nominal output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact small outline package style.
LM2675MX-5.0/NOPB
LM2675MX-5.0/NOPB by Texas Instruments is a switching regulator with 1A output current, 260kHz max switching frequency, and 5V nominal output voltage. Ideal for automotive applications due to its -40 to 125°C operating temperature range and buck switcher configuration. Package style is small outline with dual terminals for surface mount assembly.
LM2675MX-ADJ/NOPB
LM2675MX-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 1A and a max output voltage of 37V. It operates in an automotive temperature grade range from -40°C to 125°C, making it suitable for various automotive applications requiring efficient power management. With a compact small outline package style and pulse width modulation control technique, this DMOS technology-based regulator offers reliable performance in space-constrained environments.
LM2674MX-ADJ/NOPB
LM2674MX-ADJ/NOPB by Texas Instruments is a switching regulator with a max output current of 0.5A and a max input voltage of 40V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
LM2674M-ADJ/NOPB
LM2674M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with max output of 37V, 0.5A current, and 260kHz frequency. Ideal for automotive applications due to its DMOS technology, it operates b/w -40°C to 125°C range and supports input voltages from 6.5V to 40V.
LM2674M-5.0/NOPB
LM2674M-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a max output voltage of 37V, suitable for automotive applications. Operating b/w -40°C to 125°C, it has a small outline package style and offers a wide input voltage range from 6.5V to 40V, making it ideal for various power supply designs.
LM2676S-ADJ/NOPB
LM2676S-ADJ/NOPB by Texas Instruments is a switching regulator with max output voltage of 37V, max output current of 5.4A, and control mode in voltage-mode. It is used in automotive applications due to its temp grade and operates b/w -40°C to 125°C range.
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 7; Package Shape: RECTANGULAR; Surface Mount: YES; Terminal Form: GULL WING;
LM2674MX-5.0/NOPB
LM2674MX-5.0/NOPB by National Semiconductor is a switching regulator with a max output current of 1.25 A and a max input voltage of 40 V. It is commonly used in automotive applications due to its temperature grade and moisture sensitivity level.
LM2674MX-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with 8 terminals, operating b/w -40 to 125°C. It offers a max output current of 0.5A, nominal output voltage of 5V, and supports buck configuration. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and DMOS technology with PWM control technique at a max frequency of 260kHz.
LM2675M-5.0
LM2675M-5.0 by Texas Instruments is a voltage-mode switching regulator with 1A output current, 5V nominal output voltage, and 260 kHz max switching frequency. Ideal for automotive applications due to its DMOS technology and wide operating temperature range (-40 to 125°C).
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved