Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Other Regulators; No. of Terminals: 3; Terminal Form: WIRE; Maximum Voltage Tolerance: 4 %; Operating Temperature (TJ-Max): 150 Cel; Qualification Status: Not Qualified;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
Anansix
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Vyrian
Corphita
Other Function Regulators LM140LAH6.0/883C attributes and parameters. Explore more Other Function Regulators devices from National Semiconductor
Adjustability:
JESD-30 Code:
JESD-609 Code:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Nominal Output Voltage-1:
Package Body Material:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification Status:
Screening Level:
Sub-Category:
Technology:
Terminal Finish:
Terminal Form:
Terminal Position:
Maximum Voltage Tolerance:
LM140LAH6.0/883C Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138W-7-F
Diodes Incorporated
Diodes Inc.'s BSS138W-7-F is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, Gull Wing terminals, and operates in enhancement mode. With 0.2A max drain current and 3.5 ohm RDS(on), it's UL recognized and suitable for small outline packages at temperatures ranging from -55 to 150°C.
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MMBT3904LT1G
Onsemi
MMBT3904LT1G by Onsemi is a NPN BJT with max. collector-emitter voltage of 40V, hFE of 30, and fT of 300MHz. Ideal for small signal applications in electronics due to its compact size, high transition frequency, and low power dissipation capabilities.
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
Frontier Electronics
LM358MX
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SMBJ18CA
Dc Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
Vishay Telefunken
Asi Semiconductor
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
Philips Semiconductors
UA79M06MLA
UA79M06MLA by Texas Instruments is a -6V fixed voltage regulator with 0.5A output current and 150°C max operating temperature. Ideal for applications requiring precise voltage regulation in harsh environments, such as industrial machinery or automotive electronics.
LM2937ET-10/NOPB
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 5 %; Maximum Output Current-1: .5 A; Terminal Finish: MATTE TIN;
LM2931M50
Bay Linear
Other Regulators;
UA79M12CKD1
UA79M12CKD1 by Texas Instruments is a -12V fixed voltage regulator with 3 terminals. It operates at temperatures from 0 to 125°C, with a max output current of 0.5A. This bipolar technology regulator has a plastic/epoxy package body and is ideal for applications requiring precise voltage regulation in electronic circuits.
TL750M08QKTER
TL750M08QKTER by Texas Instruments is a fixed 8V voltage regulator with a max output current of 0.75A and operating temperature range from -40 to 125°C. It features a surface-mount package body material made of plastic/epoxy, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
UA78L02ACLPP1
UA78L02ACLPP1 by Texas Instruments is a 3-terminal fixed voltage regulator with an output of 2.6V and max current of 0.1A. It operates b/w 0-125°C, has a dropout voltage of 2.3V, and can handle input voltages up to 30V. Ideal for applications requiring stable power supply in various electronic devices.
UA78L09ACLP3
UA78L09ACLP3 by Texas Instruments is a fixed 9V voltage regulator with 0.1A output current and 3.5V dropout voltage, suitable for applications requiring stable power supply. It features a max input voltage of 30V, operating temperature range from 0 to 125°C, and high load regulation of only 0.09%. Ideal for various electronic devices due to its compact size and efficient performance.
UA79M12CKC3
UA79M12CKC3 by Texas Instruments is a -12V fixed voltage regulator with 0-125°C operating temperature range. It features 5% voltage tolerance, 0.5A output current, and 35V max input voltage. Ideal for applications requiring stable power supply in various electronic devices.
MC7805CK
Motorola
MC7805CK by Motorola is a 3-terminal fixed voltage regulator with an output of 5V and max current of 1.5A. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring stable power supply within a voltage tolerance of 5%.
UA79M08CLA
UA79M08CLA by Texas Instruments is a -8V fixed voltage regulator with 0-125°C operating temperature range. Featuring 3 terminals, it has a max output current of 0.5A and can handle up to 35V input voltage. Ideal for applications requiring precise voltage regulation in harsh environments.
UA78L09CJG4
UA78L09CJG4 by Texas Instruments is a fixed 9V voltage regulator with a max output current of 0.1A and a dropout voltage of 3.9V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various electronic applications requiring stable power supply within a ceramic package body material.
UA78L15ACJGP4
UA78L15ACJGP4 by Texas Instruments is a fixed voltage regulator with an output of 15V and max load regulation of 0.15%. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage outputs in electronic circuits. With a max input voltage of 35V and low dropout voltage of 3.3V, this bipolar technology regulator is ideal for through-hole mounting in diverse electronic devices.
XC6204B342MR-G
Torex Semiconductor
XC6204B342MR-G by Torex Semiconductor is a CMOS regulator with 3.4V output voltage, 0.1A output current, and 2% voltage tolerance. Ideal for applications requiring a small outline, thin profile package such as portable electronics due to its compact size and efficient performance in temperature ranges from -40°C to 85°C.
SN0309050DBVR
SN0309050DBVR by Texas Instruments is a BICMOS technology regulator with 2.85V output voltage, 0.2A output current, and -40 to 125°C operating temperature range. It is a small outline, thin profile package suitable for applications requiring precise voltage regulation in compact designs.
UA723CL
UA723CL by Texas Instruments is a bipolar technology regulator with adjustable output voltage ranging from 2V to 37V. Its metal package body and wire terminals make it suitable for various applications, including power supply circuits and voltage regulators in electronic devices. Operating temperature range is 0-70°C.
NX1117CE12Z,115
NXP Semiconductors
NXP Semiconductors' NX1117CE12Z,115 is a 3-terminal fixed voltage regulator with a nominal output of 1.2V and max current of 0.8A. It features a max input voltage of 20V, making it suitable for various applications requiring stable power supply such as consumer electronics and industrial equipment. The device is surface mountable, utilizing bipolar technology with plastic/epoxy package material for efficient heat dissipation and reliable performance in diverse environments.
TL431CLP5-J
UA79M15MJG
UA79M15MJG by Texas Instruments is a -15V fixed voltage regulator with 8 terminals. It operates in temperatures ranging from -55°C to 150°C, offering a max voltage tolerance of 5%. With ceramic package material and bipolar technology, it provides precise regulation for various electronic applications.
TPS74212RGWT
UA79M20MLA
UA79M20MLA by Texas Instruments is a BIPOLAR regulator with -20V output voltage, 0.5A output current, and 150°C max operating temperature. It is used in applications requiring precise voltage regulation in harsh environments due to its metal package body material and wide temperature range from -55°C to 150°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved