Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 16; Package Code: DFP; Terminal Form: FLAT; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 5 %;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Anansix
Corphita
Fixed Regulators - Negative Single Output LDO 5962-9570901QXA attributes and parameters. Explore more Fixed Regulators - Negative Single Output LDO devices from National Semiconductor
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Maximum Line Regulation:
Maximum Load Regulation:
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification Status:
Regulator Type:
Screening Level:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
Width:
5962-9570901QXA Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
National Semiconductor was an American semiconductor manufacturer which specialized in analog devices and subsystems, formerly with headquarters in Santa Clara, California. The company produced power management integrated circuits, display drivers, audio and operational amplifiers, communication interface products and data conversion solutions. National's key markets included wireless handsets, displays and a variety of broad electronics markets, including medical, automotive, industrial and test and measurement applications.On September 23, 2011, the company formally became part of Texas Instruments as the "Silicon Valley" division.
SMMBT2222ALT1G
Onsemi
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
EU2B-YS303C
Idec
ROTARY SWITCH;
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Central Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RC0402JR-070RL
Yageo
Yageo's RC0402JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. It features METAL GLAZE/THICK FILM tech, WRAPAROUND terminals, and 0.0625 W power dissipation. Ideal for jumper applications in electronics requiring compact surface mount components.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
Shenzhen Socay Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
2N7002
Continental Device India
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; Package Body Material: PLASTIC/EPOXY; JEDEC-95 Code: TO-236AB;
Comchip Technology
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Vishay Telefunken
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
Kec
FDC5614P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
RP117Q132D-TR-FE
New Japan Radio
RP117Q132D-TR-FE by New Japan Radio is a fixed negative single output LDO regulator with a nominal output voltage of 1.3V and max output current of 0.1A. It operates in temperatures ranging from -40°C to 85°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. The package style is small outline, thin profile, shrink pitch, ideal for space-constrained designs.
RP117K301D-TR
RP117K301D-TR by New Japan Radio is a fixed negative single output LDO regulator with a nominal output voltage of 3V and max output current of 0.1A. It has a small outline, very thin profile package style and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LM2990T-5.2
LM2990T-5.2 by Texas Instruments is a fixed negative single output LDO regulator with a nominal output voltage of 5.2V and max output current of 1A. It has a low dropout voltage of 1V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The device comes in a through-hole package style with tin lead terminal finish, ideal for various electronic circuits that demand precise voltage regulation.
LT3015ET-12#TRPBF
Analog Devices' LT3015ET-12#TRPBF is a fixed negative single output LDO regulator with a max output current of 1.5A and a min input voltage of 12.5V. It has a nominal output voltage of 12V, making it suitable for applications requiring stable power supply in industrial settings or electronic devices with specific voltage requirements. The package style is flange mount, providing ease of installation and thermal management in various electronic systems.
LM2990SX-15
LM2990SX-15 by Texas Instruments is a fixed negative single output LDO regulator with a nominal output voltage of 15V and max output current of 1A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and gull wing terminal form, this regulator is ideal for surface mount designs where space efficiency is crucial.
LT3015ET-3#TRPBF
Analog Devices' LT3015ET-3#TRPBF is a fixed negative single output LDO regulator with 1.5A max output current and 0.68V dropout voltage. Operating b/w 0 °C to 125°C, it has a nominal output voltage of 3V and max input voltage of 30V. Ideal for applications requiring stable power supply in various electronic devices.
LT3015MPQ-3#PBF
LT3015MPQ-3#PBF by Analog Devices is a fixed negative single output LDO regulator with a max output current of 1.5A and a dropout voltage of 0.68V. Operating temperature ranges from -55 to 125 °C, making it suitable for various applications requiring stable 3V output voltage in compact designs.
LT3015IDD-5#PBF
Linear Technology
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 33 V; Maximum Voltage Tolerance: 2 %;
LT3015IDD-15#PBF
LT1175MPS8-5#TR
Analog Devices' LT1175MPS8-5#TR is a fixed negative single output LDO regulator with a max output current of 0.5A and a nominal output voltage of 5V. It operates in temperatures ranging from -55 to 125 °C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
LT3015EMSE-5#TRPBF
LT3015EMSE-5#TRPBF by Analog Devices is a Fixed Negative Single Output LDO Regulator with 1.5A max output current, 0.5V dropout voltage, and 2% voltage tolerance. Ideal for applications requiring a reliable 5V power source in compact designs due to its small outline package style and surface mount capability.
ADP7185ACPZN0.5-R7
Analog Devices' ADP7185ACPZN0.5-R7 is a CMOS technology-based LDO regulator with a fixed negative single output at 0.5V, suitable for applications requiring precise voltage regulation in a compact form factor. Operating temperature range from -40 to 125°C makes it versatile for various environments. With surface mount capability and small outline package style, it offers ease of integration into space-constrained designs.
LT1175CST-5#TRPBF
Analog Devices' LT1175CST-5#TRPBF is a fixed negative single output LDO regulator with a max output current of 0.5A and a dropout voltage of 0.5V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable 5V power supply in compact designs.
LM2990S-5.0
LM2990S-5.0 by Texas Instruments is a fixed negative single output LDO regulator with a nominal output voltage of 5V and max output current of 1A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices. With a small outline package style and gull wing terminal form, this regulator is ideal for surface mount designs where space is limited.
ADP7185ACPZN1.0-R7
Analog Devices' ADP7185ACPZN1.0-R7 is a CMOS technology-based fixed negative single output LDO regulator with 1V nominal output voltage. Operating temperature range from -40 to 125°C, suitable for applications requiring precise voltage regulation in compact spaces. Package style: small outline, heat sink/slug, very thin profile, ideal for surface mount designs.
LT3015EDD-15#TRPBF
LT3015EDD-15#TRPBF by Analog Devices is a fixed negative single output LDO regulator with 1.5A max output current, 15V nominal output voltage, and 0.5mm terminal pitch. It is ideal for applications requiring precise voltage regulation in compact spaces, such as portable electronics and automotive systems.
ADP7185ACPZN3.0-R7
ADP7185ACPZN3.0-R7 by Analog Devices is a CMOS technology-based LDO regulator with 3V output voltage, ideal for applications requiring fixed negative single output regulators. It operates in temperature range of -40 to 125°C, features small outline package style, and supports input voltage from 3.5V to 5.5V.
ADP7183ACPZN3.3-R7
Analog Devices' ADP7183ACPZN3.3-R7 is a CMOS LDO regulator with 3.3V output voltage, 0.3A max current, and 2.6% voltage tolerance. Ideal for applications requiring fixed negative single output regulators in compact spaces due to its small outline package style and low seated height of 0.6mm.
LT3015MPQ-5#TRPBF
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 33 V; Maximum Voltage Tolerance: 2 %; Package Body Material: PLASTIC/EPOXY;
LT1964ES5-5
LT1964ES5-5 by Analog Devices is a fixed negative single output LDO regulator with 5V nominal output voltage, 0.2A max output current, and 0.49V max dropout voltage. It is ideal for applications requiring stable power supply in compact spaces due to its small outline package style and surface mount capability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
National Semiconductor
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved