Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's XRCGB27M000F3M00R0 is a 27 MHz crystal oscillator with 30 ppm frequency tolerance and 40% stability. Ideal for surface mount applications, it operates b/w -30°C to 85°C with a series resistance of 150 ohm.
Median Price
$0.173
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.300
100+ parts
$0.230
1k+ parts
$0.200
10k+ parts
$0.188
Element14
-
$0.209
$0.165
DigiKey
$0.178
TTI
$0.150
Verical
$0.145
Chip1Stop
$0.081
$0.077
Farnell
Nova Conductors
$0.164
Vyrian
Netroflash
$0.155
$0.152
Corohmni
$1.228
AZTECH Wire
$16.180
iodParts Technologies Inc.
Perfect Parts
GreenTree Electronics
With a low frequency tolerance of 30 ppm, this crystal oscillator is precise and reliable for various applications.
The 40% frequency stability of this oscillator ensures consistent performance even in fluctuating environments.
Featuring a low series resistance of 150 ohm, this oscillator offers efficient signal transmission and minimal power loss.
Capable of operating at temperatures as low as -30°C, this oscillator is suitable for use in cold environments.
The parallel fundamental crystal design of this oscillator provides excellent frequency control and stability.
With a nominal operating frequency of 27 MHz, this oscillator is ideal for applications requiring this specific frequency.
The load capacitance of 6 pF helps optimize the performance of this oscillator in various circuit configurations.
The surface mounting feature of this oscillator simplifies installation and makes it suitable for compact designs.
The low drive level requirement of 300 uW makes this oscillator energy-efficient and suitable for battery-powered devices.
With compact dimensions, this oscillator is space-saving and can be easily integrated into different systems.
Capable of operating at temperatures up to 85°C, this oscillator is reliable in a wide range of ambient conditions.
Crystal Oscillators XRCGB27M000F3M00R0 attributes and parameters. Explore more Crystal Oscillators devices from Murata Manufacturing
Crystal or Resonator Type:
Drive Level:
Frequency Stability:
Frequency Tolerance:
Load Capacitance:
Mounting Feature:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Physical Dimension:
Series Resistance:
XRCGB27M000F3M00R0 Crystals & Resonators trade compliance attributes, and parameters.
HTS
8541.60.00.60
SB
PCN Assembly/Origin - XRCGA/XRCGB Series 15/Mar/2016
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
BAV99
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (Abs) (ID): 2.5 A;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDC5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
Plessey Semiconductors Discrete Components Div
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
1N4148
Compensated Devices
RECTIFIER DIODE; Terminal Position: UPPER; Terminal Form: NO LEAD; No. of Terminals: 1; Surface Mount: YES; Package Shape: SQUARE;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
SS14
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99-7-F
Multicomp Pro
BSS84PH6327XTSA2
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
Surge Components
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
ROHM
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
ABLS-12.000MHZ-30-A-4-H-T
ABLS-12.000MHZ-30-A-4-H-T by Abracon is a 12MHz crystal oscillator with 30ppm frequency tolerance and 35% stability. Ideal for applications requiring precise timing in temperature-sensitive environments, it operates b/w -10°C to 60°C and features a parallel-fundamental crystal type.
ABLS2-8.000MHZ-D4Y-T
ABLS2-8.000MHZ-D4Y-T by Abracon is an 8 MHz Crystal Oscillator with 30 ppm Frequency Tolerance and 30% Stability. Ideal for applications requiring precise timing in a temperature range of -40 to 85°C, featuring low aging at 5 PPM/first year.
CX5032GB24000H0PESZZ
Kyocera
Kyocera's CX5032GB24000H0PESZZ crystal oscillator operates at 24 MHz with 50% frequency stability. It features a series resistance of 100 ohm and load capacitance of 12 pF, suitable for surface mount applications in temperature range -10 to 70°C.
FQ5032B-12.000
Fox Electronics
FQ5032B-12.000 by Fox Electronics is a 12 MHz crystal oscillator with 30 ppm frequency tolerance and 30% stability. Ideal for applications requiring precise timing, it features a parallel fundamental crystal type, gold terminal finish, and operates b/w 0°C to 70°C temperatures.
ABS07-32.768KHZ-T
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
ECS.327-12.5-34R-TR
Ecs International
ECS.327-12.5-34R-TR by Ecs International is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing in electronics due to its high stability and low aging rate of 3 PPM/yr at 0.032768 MHz frequency.
ABLS-7.3728MHZ-B-2-T
ABLS-7.3728MHZ-B-2-T by Abracon is a 7.3728 MHz crystal oscillator with 20 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 70 °C, featuring a parallel fundamental type and matte tin finish for surface mount installation.
ABS07AIG-32.768KHZ-9-D-T
Abracon's ABS07AIG-32.768KHZ-9-D-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 80000 ohm series resistance. Ideal for applications requiring precise timing at a frequency of 0.032768 MHz, such as in telecommunications equipment or industrial automation systems.
NX1612SA-50M-EXS00A-CS08403
Nihon Dempa Kogyo
NX1612SA-50M-EXS00A-CS08403 by Nihon Dempa Kogyo is a crystal oscillator with 10 ppm frequency tolerance, 15% stability, and 80 ohm series resistance. Ideal for applications requiring a parallel-fundamental type resonator at 50 MHz, operating b/w -30 to 85 °C with an aging rate of 3 PPM/yr.
MP049B-E
Cts
CTS MP049B-E crystal oscillator operates at 4.9152 MHz with 30 ppm frequency tolerance and 50% stability. Ideal for applications requiring precise timing, it features a parallel fundamental type, through-hole mounting, and -40 to 85°C operating temperature range.
9HT12-32.768KAZF-T
Txc
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 3 PPM/FIRST YEAR; Drive Level: .5 uW; Physical Dimension: L1.6XB1.0XH0.5 (mm)/L0.063XB0.039XH0.02 (inch);
ABM8W-38.8800MHZ-7-B1U-T3
ABM8W-38.8800MHZ-7-B1U-T3 by Abracon is a 38.88 MHz crystal oscillator with 10 ppm frequency tolerance and 10% stability. Ideal for applications requiring precise timing, such as telecommunications equipment or industrial automation systems.
ABS05W-32.768KHZ-J-2-T
ABS05W-32.768KHZ-J-2-T by Abracon is a crystal oscillator with a frequency tolerance of 20 ppm and frequency stability of 256%. It is commonly used in applications requiring precise timing, such as communication systems and microcontrollers.
ECS-250-18-33B-CKY-TR3
Quartz Crystals;
AB-8.000MHZ-B2
AB-8.000MHZ-B2 by Abracon is a 8 MHz crystal oscillator with 50 ppm frequency tolerance and 100% stability. Ideal for applications requiring precise timing, it operates b/w -20 to 70 °C, featuring parallel fundamental type and surface mounting.
MC-14632.7680KA-A5:ROHS
Seiko Epson
MC-14632.7680KA-A5:ROHS by Seiko Epson is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 65000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations with -40 to 85 °C operating temperature range.
7M-12.000MEEQ-T
7M-12.000MEEQ-T by Txc is a crystal oscillator with 10 ppm frequency tolerance and 10% stability, suitable for applications requiring precise timing. With a parallel fundamental crystal type and 12 MHz operating frequency, it offers low aging at 3 PPM/first year. Its compact size of 3.2mm x 2.5mm x 0.7mm makes it ideal for surface mount installations in various electronic devices.
TF202P32K7680R
TF202P32K7680R by Cts is a crystal oscillator with 20 ppm frequency tolerance, 108% stability, and 90000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as in telecommunications equipment or industrial automation systems. Operating temperature ranges from -40 to 85 °C.
ATS120CSM-1
ATS120CSM-1 by Cts is a crystal oscillator with 12 MHz nominal frequency, 30 ppm tolerance, and 50% stability. Ideal for applications requiring precise timing in electronics due to its compact size, surface mount feature, and low aging rate of 5 PPM/YEAR.
LFXTAL009678REEL
Iqd Frequency Products
LFXTAL009678REEL by IQD Frequency Products is a crystal oscillator with 20 ppm frequency tolerance, 80000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing such as IoT devices, wearables, and automotive electronics.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
XRCGB27M120F3M00R0
Murata Manufacturing
Murata Manufacturing's XRCGB27M120F3M00R0 crystal oscillator operates at 27.12 MHz with 30 ppm frequency tolerance and 40% stability. Suitable for surface mount applications, it has a series resistance of 150 ohm and load capacitance of 6 pF. Ideal for various electronic devices requiring precise timing control.
XRCGB24M000F0L00R0
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 100 ppm; Series Resistance: 150 ohm; Nominal Operating Frequency: 24 MHz; Maximum Operating Temperature: 85 Cel;
XRCGB27M120F3M10R0
Murata Manufacturing's XRCGB27M120F3M10R0 crystal oscillator operates at 27.12 MHz with a frequency tolerance of 30 ppm and stability of 40%. Ideal for applications requiring precise timing, it features a low series resistance of 80 ohm and aging rate of 5 PPM/year. Suitable for surface mount installations, it has a compact size of L2.0xB1.6xH0.65 (mm) and can operate in temperatures ranging from -30 to 85°C.
XRCGB32M000F2P00R0
XRCGB32M000F2P00R0 by Murata Manufacturing is a crystal oscillator with a frequency tolerance of 20 ppm and stability of 20%. It has a series resistance of 100 ohm and is suitable for applications requiring a nominal operating frequency of 32 MHz.
XRCGB24M000F3M00R0
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Frequency Stability: 40 %; Series Resistance: 150 ohm; Minimum Operating Temperature: -30 Cel;
XRCGB25M000F3M00R0
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -30 Cel; Frequency Stability: 40 %;
XRCGB27M000F2P00R0
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/YEAR; Drive Level: 300 uW; Minimum Operating Temperature: -30 Cel;
XRCGB37M400F1S1BR0
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 10 ppm; Aging: 2 PPM/YEAR; Minimum Operating Temperature: -30 Cel; Load Capacitance: 8 pF;
XRCGB32M000F1H01R0
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 10 ppm; Aging: 2 PPM/YEAR; Physical Dimension: L2.0XB1.6XH0.65 (mm)/L0.079XB0.063XH0.026 (inch); Maximum Operating Temperature: 85 Cel;
XRCGB27M120F2P10R0
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/YEAR; Additional Features: TR, PLASTIC, 7 INCH; Load Capacitance: 10 pF;
XRCGB40M000F1S1BR0
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 10 ppm; Aging: 2 PPM/YEAR; Physical Dimension: 2.0mm X 1.6mm X 0.65mm; Minimum Operating Temperature: -30 Cel;
XRCGB24M000F2P00R0
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 5 PPM/YEAR; Minimum Operating Temperature: -30 Cel; Series Resistance: 150 ohm;
XRCGB24M000FAN00R0
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 25 ppm; Minimum Operating Temperature: -10 Cel; Physical Dimension: L2.0XB1.6XH0.7 (mm)/L0.079XB0.063XH0.028 (inch); Drive Level: 300 uW;
XRCGB40M000F1S1LR0
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 10 ppm; Aging: 2 PPM/YEAR; Maximum Operating Temperature: 85 Cel; Load Capacitance: 7 pF;
XRCGB48M000F4M00R0
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 45 ppm; Maximum Operating Temperature: 85 Cel; Load Capacitance: 6 pF; Minimum Operating Temperature: -30 Cel;
XRCGB25M000F0L00R0
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 100 ppm; Frequency Stability: 50 %; Drive Level: 300 uW; Maximum Operating Temperature: 85 Cel;
XRCGB25M000F3A00R0
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 30 ppm; Aging: 2 PPM/YEAR; Maximum Operating Temperature: 125 Cel; Additional Features: AEC-Q200; TR, PLASTIC, 7 INCH;
XRCGB32M000F1H00R0
Murata Manufacturing's XRCGB32M000F1H00R0 crystal oscillator operates at 32 MHz with 10 ppm frequency tolerance and 10% stability. Ideal for applications requiring precise timing, such as telecommunications equipment and industrial automation systems.
XRCGB32M000F1S1AR0
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 10 ppm; Aging: 2 PPM/YEAR; Series Resistance: 50 ohm; Drive Level: 300 uW;
XRCGB24M000F3A00R0
Murata Manufacturing's XRCGB24M000F3A00R0 crystal oscillator operates at 24 MHz with 30 ppm frequency tolerance and 35% stability. Ideal for applications requiring precise timing, such as telecommunications equipment and industrial automation systems.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved