Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's PV32H202A01B00 is a CERMET variable resistor with 2000 ohm resistance, 20% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for adjusting voltage levels with an operating range of -55 to 125 °C.
Median Price
$2.600
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$1.799
1k+ parts
$1.490
10k+ parts
$1.305
Bristol Electronics
$2.856
$1.771
$1.071
-
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Nova Conductors
Semtec, LLC
Euro-Tech
Perfect Parts
Netroflash
This resistor can operate effectively at a temperature range of -55 to 125 °C, making it suitable for various environments.
The cylindrical construction allows for easy installation and integration into circuits.
The specified resistance value of 2000 ohms is ideal for specific applications that require this level of resistance.
The high operating voltage of 300V provides flexibility in the application of this resistor across different circuits.
With a tolerance of 20%, this resistor offers a reliable level of precision in resistance values.
The rated power dissipation of 0.5W ensures that the resistor can handle power effectively without overheating.
Variable Resistors PV32H202A01B00 attributes and parameters. Explore more Variable Resistors devices from Murata Manufacturing
Orientation (Actuator):
Type (Actuator):
Construction:
Ganging Number:
JESD-609 Code:
Length (Lead):
Mounting Type:
No. of Terminals:
No. of Turns:
Maximum Operating Temperature:
Minimum Operating Temperature:
Diameter (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Packing Method:
Rated Power Dissipation (P):
Rated Temperature:
Resistance:
Law Of Resistance:
Resistor Type:
Angle Of Rotation:
Sub-Category:
Technology:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Tolerance:
Operating Voltage:
PV32H202A01B00 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.50
SB
8533.40.00.80
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
EU2B-YS3203C
Idec
ROTARY SWITCH;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
1N4148
Pro-an Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Sensitron Semiconductor
EU2B-YS3103F
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Moisture Sensitivity Level (MSL): 1; Maximum Operating Temperature: 150 Cel;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
CRCW040210K0FKED
Vishay Intertechnology
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
STMicroelectronics
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-XSFM-T3; Minimum Input-Output Voltage Differential: 3 V;
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
C0603C104K5RACAUTO
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
3364W-1-503E
Bourns
Bourns 3364W-1-503E is a CERMET trimmer resistor with 50000 ohm resistance, linear law, and 25% tolerance. It is used in applications requiring precise resistance adjustments due to its screw actuator, SMT package style, and surface mounting type.
14910A0BHSX10103KA
Vishay Intertechnology's 14910A0BHSX10103KA is a linear cermet trimmer pot with 10000 ohm resistance, 3 terminals, and 10% tolerance. It is used in PCB mounting applications for adjusting and controlling electrical circuits with a rated power dissipation of 1W. The potentiometer has an operating temperature range from -40°C to 125°C, making it suitable for various electronic devices.
3683S-1-502L
Bourns 3683S-1-502L is a linear potentiometer with 5000 ohm resistance, 3% tolerance, and 2W power dissipation. Ideal for panel mount applications in temperature-sensitive environments due to its -25 to 85 °C operating range and CERMET technology.
3266W-1-500LF
The Bourns 3266W-1-500LF is a CERMET trimmer pot with 50 ohm resistance, 10% tolerance, and 0.25 W power dissipation. Ideal for PCB mounting applications in temperature-sensitive environments with a range of -55 to 150 °C. Features linear resistance law, vertical actuator orientation, and screw-type actuator design.
PTL60-10G1-103B2
The Bourns PTL60-10G1-103B2 is a linear carbon potentiometer with a resistance of 10000 ohm. It has a rated temperature of 70°C and can be mounted through hole. This variable resistor is commonly used in PCB applications for precise voltage control.
EVM1DSX30B14
Panasonic
EVM1DSX30B14 by Panasonic is a linear trimmer variable resistor with 1 turn and a resistance of 10000 ohm. It operates at temperatures ranging from -40 to 100 °C and has an operating voltage of 50 V. This surface mount device is commonly used in electronic circuits for precise resistance adjustment.
PV32P502A01B00
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PCW1J-R24-BAD252L
The Bourns PCW1J-R24-BAD252L is a 2500 ohm potentiometer with a 20% tolerance and 0.25 W power dissipation. It features conductive plastic technology, vertical actuator orientation, and audio law of resistance. Ideal for PCB mounting applications requiring precise resistance adjustments in a temperature range from 1 to 125 °C.
TC73W-1-103E
Bourns TC73W-1-103E is a 10000 ohm linear trimmer resistor with 20 turns, rated for temperatures b/w -25 to 85 °C. Ideal for SMT applications, featuring a screw actuator and 30% tolerance, suitable for various electronic circuit adjustments.
3386F-1-204TLF
Bourns 3386F-1-204TLF is a linear cermet trimmer resistor with 200k ohm resistance, 10% tolerance, and 0.5W power dissipation. Ideal for PCB mounting applications in temperature-sensitive environments due to its wide operating range from -55°C to 125°C. Features vertical actuator orientation and knob type for precise adjustments.
3352T-1-103LF
The Bourns 3352T-1-103LF is a linear variable resistor with a resistance of 10k ohm, rated for temperatures b/w -55°C and 125°C. It is commonly used in PCB mount applications where precise resistance adjustment is required.
3386F-1-103LF
Bourns 3386F-1-103LF is a CERMET trimmer resistor with 10000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. It is used in PCB mount applications for precise voltage adjustments due to its linear resistance law and 280° rotation angle.
14910F0GJSX10501KA
Vishay Intertechnology's 14910F0GJSX10501KA is a CERMET variable resistor with a resistance of 500 ohm and a tolerance of 10%. It is commonly used in PCB mount applications, with a max operating temperature of 125 °C and an angle of rotation of 270°.
249BBHS0XB25103KA
Vishay Intertechnology's 249BBHS0XB25103KA is a CERMET POTENTIOMETER with 10000 ohm resistance, 10% tolerance, and 0.5 W power dissipation. Ideal for PCB mount applications, it operates b/w -55 to 125 °C with a max voltage of 70.7 V and offers a rotation angle of 265°.
23ESB104MMF50NF
TE Connectivity
TE Connectivity's 23ESB104MMF50NF is a 100k ohm logarithmic potentiometer with carbon film technology. It features a circular package, horizontal actuator, and shaft type actuator. Ideal for through hole mounting applications with a rated power dissipation of 0.4W.
RKJXV1224005
Alps Electric
POTENTIOMETER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .0125 W; Maximum Operating Temperature: 70 Cel; Orientation (Actuator): VERTICAL;
3386W-1-501LF
Bourns 3386W-1-501LF is a 500 ohm linear trimmer resistor with 3 terminals. It has a rated power dissipation of 0.5 W and operates b/w -55 to 125 °C. Ideal for PCB mounting applications due to its rectangular package shape and through-hole mounting type.
3224W-1-105E
Bourns 3224W-1-105E is a linear trimmer resistor with 12 turns, 1000000 ohm resistance, and 10% tolerance. It operates b/w -65 to 150 °C and has a temperature coefficient of 100 ppm/°C. Ideal for applications requiring precise resistance adjustments in compact SMT packages.
89PHR100KLF
Tt Electronics Plc
89PHR100KLF by Tt Electronics Plc is a CERMET variable resistor with 100000 ohm resistance, rated for 0.75 W power dissipation. It features a linear law of resistance and operates b/w -55 to 125 °C temperatures. Ideal for PCB mounting applications requiring precise voltage adjustments in electronic circuits.
D12K2K0E
Ohmite Manufacturing
D12K2K0E by Ohmite Manufacturing is a 2000 ohm linear wire wound potentiometer with a rated power dissipation of 12W. It has a max operating temperature of 350°C and can be used for chassis mount applications requiring precise resistance control.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PV32H500A01B00
Murata Manufacturing
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 50 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PV32H103A01B00
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PV32H501A01B00
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PV32H501A02B00
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
PV32H504A02B00
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 500000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
PV32H200A01B00
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PV32H201A01B00
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 200 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PV32H203A01B00
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 20000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PV32H204A01B00
TRIMMER; Mounting Type: SURFACE MOUNT; Resistance: 200000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PV32H205A01B00
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2000000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PV32H253A01B00
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 25000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PV32H202A02B00
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 10 %;
PV32H202A01B00
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 2000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 200000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
PV32H254A01B00
TRIMMER; Mounting Type: THROUGH HOLE MOUNT; Resistance: 250000 ohm; Rated Power Dissipation (P): .5 W; Maximum Operating Temperature: 125 Cel; Tolerance: 20 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved