Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's PTGL12AS4R7K6B51B0 is a PTC thermistor with 4.7 ohm resistance and 140V operating voltage. It is used for overcurrent protection, featuring radial terminal placement and disk package shape. With a rated power dissipation of 2.3W, it operates b/w -30°C to 85°C temperatures in through-hole mounting applications.
Median Price
$0.582
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Arrow
1+ parts
$0.424
100+ parts
1k+ parts
10k+ parts
Chip1Stop
$1.180
-
Verical
Vyrian
Nova Conductors
Advanced Electronics
$0.018
$0.016
$0.015
Corohmni
$0.279
AZTECH Wire
$21.330
Authorized Procurement Solutions
Argo Parts USA
Netroflash
Continental Prestige Electronics
The thermistor is specifically designed for overcurrent protection applications, ensuring safety and reliability in preventing excessive currents.
With a low resistance value of 4.7 ohm, this thermistor efficiently limits the flow of current, providing protection against overcurrent situations.
The high rated AC voltage of 140 V allows for reliable performance in a variety of electrical systems without the risk of voltage spikes damaging the thermistor.
This thermistor can operate at high temperatures up to 85°C, making it suitable for applications where heat is a concern.
The through-hole mounting type allows for easy and secure installation of the thermistor onto circuit boards, ensuring stability and optimal performance.
With a rated power dissipation of 2.3 W, this thermistor can handle high power loads effectively, making it suitable for overcurrent protection in various applications.
Non-linear Resistors PTGL12AS4R7K6B51B0 attributes and parameters. Explore more Non-linear Resistors devices from Murata Manufacturing
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated AC Voltage (URac):
Rated Power Dissipation (P):
Resistance:
Resistor Type:
Sub-Category:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Tolerance:
Operating Voltage:
PTGL12AS4R7K6B51B0 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
PCN Obsolescence/ EOL - Mult Series 01/Mar/2021 PT - End of Life 30/MAR/2018
PCN Packaging - PT,NT,NX Series 10/Jul/2018
PCN Part Status Change - Mult Series NRND 01/Aug/2021
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
LL4148
Continental Device India
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
Shenzhen Socay Electronics
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Formosa Microsemi
ULN2803A
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
Thinking Electronic Industrial
1N4148WS
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Changzhou Starsea Electronics
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
1N4148WT
Eic Semiconductor
LM317T
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
2N2222A
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
LM317BD2TG
Onsemi
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
B57371V2103J060
TDK
B57371V2103J060 by TDK is a NTC thermistor with 10000 ohm resistance, 5% tolerance, and 0.18 W power dissipation. It is used for temperature compensation in various applications due to its thermal sensitivity index of 4455 K and operating temperature range from -55 to 125 °C. The thermistor has a dual-ended terminal placement in a rectangular SMT package.
MINISMDC014F-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.5 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Terminal Shape: WRAPAROUND;
RF2628-000
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1.25 ohm; Rated Power Dissipation (P): .45 W; Maximum Operating Temperature: 85 Cel; Shape (Package): DISK PACKAGE;
EZJP0V6R8MA
Panasonic
EZJP0V6R8MA by Panasonic is a rectangular package varistor with dual-ended terminal placement. It has a max operating temperature of 85°C and operates at a voltage of 3.7V. This surface mount resistor is commonly used in applications that require protection against voltage surges or transients.
NTCS0603E3104JXT
Vishay Intertechnology
NTCS0603E3104JXT by Vishay Intertechnology is a non-linear resistor with a resistance of 100000 ohm and a tolerance of 5%. It is used for temperature sensing applications, with a rated temperature range of -40 to 150 °C.
V5.5MLA0805NH
V5.5MLA0805NH by Littelfuse is a VARISTOR with 5.5V operating voltage and 0.3J energy absorption capacity. It has DUAL ENDED terminals, RECTANGULAR PACKAGE shape, and is used for surge protection in SMT applications at temperatures ranging from -40°C to 125°C.
SMD185F-2
TE Connectivity
TE Connectivity's SMD185F-2 is a PTC resettable fuse with 1.5W power dissipation, ideal for temperature sensing applications. Featuring dual-ended terminals and a rectangular package, it operates b/w -40°C to 85°C. This non-linear resistor is surface mountable and comes in TR packaging method.
SMD030F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.2 ohm; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; JESD-609 Code: e3;
0603L010YR
0603L010YR by Littelfuse is a PTC resettable fuse with resistance of 0.9 ohm, operating voltage of 15V, and dual-ended terminals. Ideal for overcurrent protection in various applications. SMT package style with matte tin finish, suitable for surface mounting type.
GMOV-14D111K
Bourns
The Bourns GMOV-14D111K is a VARISTOR with 115V max circuit RMS voltage and 60J energy absorption. It is used for OVERLOAD PROTECTION in applications requiring METAL OXIDE technology. With radial terminal placement, it operates b/w -40°C to 85°C, meeting CUL and UL standards.
CL-60
Amphenol
The Amphenol CL-60 is a NTC thermistor with 10 ohm resistance and 25% tolerance. It is designed for overload protection applications, featuring radial terminal placement and disk package shape. With a thermal sensitivity index of 888 K, it operates b/w -50 to 175 °C effectively.
16R1400GH
16R1400GH by Littelfuse is a PTC resettable fuse with resistance of 0.0026 ohm and operating voltage of 16V. It is used for overcurrent protection in applications requiring radial terminal placement and rectangular package shape. Operating temperature ranges from -40 to 85°C, meeting standards like CUL, TUV, and UL.
B72220S3271K101
B72220S3271K101 by TDK is a VARISTOR with 260J energy capacity, 350V operating voltage, and 275V RMS circuit voltage. It has radial terminal placement and metal oxide film technology. Ideal for surge protection in applications requiring high energy absorption and voltage regulation.
NTCG163JF103FT1S
NTCG163JF103FT1S by TDK is a Non-linear Resistor with 10000 ohm resistance, 1% tolerance, and -40 to 150 °C operating temperature range. It is a surface mount thermistor in a rectangular package suitable for automotive applications meeting AEC-Q200 standards.
B57237-S109-M
Siemens
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1 ohm; Maximum Operating Temperature: 170 Cel; Terminal Shape: WIRE; Minimum Operating Temperature: -25 Cel;
RXEF050-AP
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Rated AC Voltage (URac): 72 V; Terminal Placement: RADIAL; Additional Features: 0.5-0.77 OHMS AT 20 DEG CEL;
NTCLE203E3103GB0
Vishay Intertechnology NTCLE203E3103GB0 is a 10000 ohm NTC thermistor with thermal sensitivity index of 3977 K. Ideal for temperature sensing applications, it has a rated temperature range from -40 to 125 °C and tolerance of 2%. With radial terminal placement and disk package shape, it offers through hole mounting and 0.1 W power dissipation.
SIOV-S20K275
Infineon Technologies
SIOV-S20K275 by Infineon is a METAL OXIDE FILM VARISTOR with 151J energy capacity. It operates at 350V DC/275V RMS, suitable for THROUGH HOLE MOUNT applications. This non-linear resistor in radial package style with Tin/Lead finish is ideal for surge protection in various electronic circuits.
RF1350-000
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Additional Features: RESISTANCE MIN IS 3.6 OHMS; Packing Method: TR; JESD-609 Code: e3;
V5.5MLA0805LNH
Harris Semiconductor
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Terminal Finish: MATTE TIN OVER NICKEL; Maximum Circuit RMS Voltage: 4 V; Minimum Operating Temperature: -40 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PTGL07AR330M6A51B0
Murata Manufacturing
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 33 ohm; Rated Power Dissipation (P): 1.4 W; Maximum Operating Temperature: 60 Cel; Tolerance: 20 %;
PTGL09AR250H8B52B0
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 25 ohm; Rated Power Dissipation (P): 1.7 W; Maximum Operating Temperature: 60 Cel; Tolerance: 25 %;
PTGL07AS1R8K2B51A0
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1.8 ohm; Rated Power Dissipation (P): 1.7 W; Maximum Operating Temperature: 85 Cel; Tolerance: 10 %;
PTGL09AR1R8H2B51B0
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1.8 ohm; Rated Power Dissipation (P): 1.8 W; Maximum Operating Temperature: 60 Cel; Tolerance: 25 %;
PTGL05AR181M9N51B0
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 180 ohm; Rated Power Dissipation (P): .9 W; Maximum Operating Temperature: 60 Cel; Tolerance: 20 %;
PTGL07AR4R6H2B51B0
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 4.6 ohm; Rated Power Dissipation (P): 1.3 W; Maximum Operating Temperature: 60 Cel; Tolerance: 25 %;
PTGL12AR150H8B72B0
PTGL12AR150H8B72B0 by Murata Manufacturing is a PTC thermistor resistor with a resistance of 15 ohm and a tolerance of 25%. It is used for overload protection in applications such as through-hole mounting and radial terminal placement.
PTGL07AR700H8B52B0
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 70 ohm; Rated Power Dissipation (P): 1.4 W; Maximum Operating Temperature: 60 Cel; Tolerance: 25 %;
PTGL12AR270M9C01B0
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 27 ohm; Rated Power Dissipation (P): 2.3 W; Maximum Operating Temperature: 60 Cel; Tolerance: 20 %;
PTGL05AR181M7P52B0
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 180 ohm; Rated Power Dissipation (P): .7 W; Maximum Operating Temperature: 60 Cel; Tolerance: 20 %;
PTGL05AR550H4P51B0
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 55 ohm; Rated Power Dissipation (P): .7 W; Maximum Operating Temperature: 60 Cel; Tolerance: 25 %;
PTGL07AS1R8K2B51B0
PTGL12AR100M6C01B0
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): 2.3 W; Maximum Operating Temperature: 60 Cel; Tolerance: 20 %;
PTGL14AR3R3M3B71B0
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 3.3 ohm; Rated Power Dissipation (P): 2.4 W; Maximum Operating Temperature: 60 Cel; Tolerance: 20 %;
PTGL07AR250H4B51A0
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 25 ohm; Rated Power Dissipation (P): 1.3 W; Maximum Operating Temperature: 60 Cel; Tolerance: 25 %;
PTGL07AR450H8B52B0
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 45 ohm; Maximum Operating Temperature: 60 Cel; Tolerance: 25 %; Height (Package): 8 mm;
PTGL09AS2R2K3B51B0
PTGL09AS2R2K3B51B0 by Murata Manufacturing is a PTC thermistor resistor with a resistance of 2.2 ohm and rated AC voltage of 51 V. It is used for overcurrent protection, has radial terminal placement, and comes in a disk package.
PTGL07AR650H8B52A0
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 65 ohm; Maximum Operating Temperature: 60 Cel; Tolerance: 25 %; Terminal Shape: WIRE;
PTGL07BD100N2B51B0
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10 ohm; Maximum Operating Temperature: 60 Cel; Tolerance: 30 %; Package Style (Meter): Radial;
PTGL09AR220M6B52B0
PTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 22 ohm; Rated Power Dissipation (P): 1.8 W; Maximum Operating Temperature: 60 Cel; Tolerance: 20 %;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved