Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's LQW15CNR39K10D is a fixed inductor with 0.39uH nominal inductance, 450MHz self-resonance frequency, and -55 to 125°C operating temperature range. Ideal for RF applications due to its compact 0402 size and dual-ended terminal placement for surface mount assembly.
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Prism Electronics
Nova Conductors
AZTECH Wire
$1.640
$1.580
$1.540
$1.510
Bastille Electronics
Surface mount capability allows for easy installation onto circuit boards, making this product convenient for use in various electronic applications.
Dual ended terminal placement enables flexibility in connecting the inductor within a circuit, enhancing compatibility and ease of use.
Designed for operation at a frequency of 100 MHz, this inductor is suited for RF applications requiring precise performance at this frequency range.
With a nominal inductance of 0.39 uH, this inductor offers the desired level of inductance for efficient signal processing in RF circuits.
Capable of handling a maximum rated current of 0.37 A, this inductor can support a range of applications without compromising performance.
As a general purpose inductor, this product is versatile and suitable for a wide range of electronic devices and circuits, offering reliability and flexibility.
With a low DC resistance of 0.62 ohm, this inductor minimizes power loss and enhances efficiency in signal transmission and processing.
Constructed with ferrite core material, this inductor provides excellent magnetic properties, stability, and performance in RF applications.
Fixed Inductors LQW15CNR39K10D attributes and parameters. Explore more Fixed Inductors devices from Murata Manufacturing
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Package Shape:
Case or Size Code:
Shielded:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
LQW15CNR39K10D Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
SMBJ18CA
Fairchild Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Diotec Semiconductor Ag
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
LL4148-GS08
Vishay Intertechnology
The Vishay Intertechnology LL4148-GS08 is a glass diode with fast recovery time of 0.008 us and max reverse current of 5 uA. Ideal for applications requiring rectification, it has a breakdown voltage of 100 V and can handle a peak forward current of 2 A.
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
M39029/58-360
Glenair
CONNECTOR ACCESSORY; Contact Gender: MALE; Material: COPPER ALLOY; IEC Conformity: NO; MIL-Connector Accessory Name: CONTACT; MIL Conformity: YES;
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
LM358N
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Central Semiconductor
LM7805CT/NOPB
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Max): 125 Cel; Maximum Output Voltage-1: 5.25 V;
Tak Cheong Electronics Holdings
SS14
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
LQP03TN9N1J02D
Murata Manufacturing
Murata Manufacturing's LQP03TN9N1J02D is a chip inductor with 0.0091 uH nominal inductance, 3300 MHz self-resonance frequency, and 125 °C max operating temp. Ideal for RF applications due to its small size (0201) and high quality factor of 14 at L-nom.
IHLP3232CZER100M11
Vishay Intertechnology's IHLP3232CZER100M11 is a shielded fixed inductor with 10uH nominal inductance, 5.3A max current, and 12MHz self-resonance freq. Ideal for DC-DC converters, it operates b/w -55°C to 125°C. With SMT packaging and dual-ended terminals, it suits various general-purpose applications.
DR74-330-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
LQM21FN100M70L
Murata Manufacturing's LQM21FN100M70L is an 0805 chip inductor with 10uH nominal inductance, 0.78 ohm DC resistance, and 15 MHz self-resonance frequency. Ideal for RF applications, this shielded SMT inductor operates b/w -55°C to 125°C and has a max rated current of 0.1A.
IHLP2020CZER1R5M01
Vishay Intertechnology's IHLP2020CZER1R5M01 is a shielded, high current inductor with 1.5uH nominal inductance and 7.2A max rated current. Ideal for general purpose applications, this SMT inductor has a compact 2020 size, operates b/w -55 to 125 °C, and features a self-resonance frequency of 42 MHz.
B82792C2474N315
TDK
B82792C2474N315 by TDK is a surface mount fixed inductor with 470uH nominal inductance, 0.6A max rated current, and 0.25 ohm DC resistance. Ideal for general purpose applications, this rectangular package inductor has 8 terminals and uses ferrite core material.
DR73-101-R
CTX100-5-52M-R
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 4; Package Style (Meter): Toroidal; Shielded: NO; Surface Mount: NO;
SRN4018-4R7M
Bourns
Bourns SRN4018-4R7M is a shielded, surface mount fixed inductor with 4.7uH nominal inductance and 1.9A max rated current. Ideal for power applications, it features a self-resonance frequency of 35MHz and operates b/w -40°C to 125°C temperature range.
CM453232-100KL
Bourns CM453232-100KL is a 10uH SMT inductor with 2 terminals, ideal for RF applications. It operates b/w -40°C to 100°C, with a max current of 0.25A and self-resonance at 20MHz. The compact rectangular package (4.5mm x 3.2mm x 3.2mm) features ferrite core material and matte tin finish for high-quality performance in general purpose circuits.
XAL5030-472MEC
Coilcraft
Coilcraft XAL5030-472MEC is a shielded, surface mount inductor with 4.7uH nominal inductance and 5.9A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 23MHz and AEC-Q200 reference standard compliance.
B82464G4104M000
The TDK B82464G4104M000 is a shielded, surface mount fixed inductor with 100uH nominal inductance. It has a max rated current of 1.05A and operates b/w -55 to 150°C. Ideal for power applications, this general purpose inductor features dual-ended terminals and ferrite core material.
70-3
Coilcraft's 70-3 fixed inductor with 0.15 uH nominal inductance, 1.18 A max current, and 38 min quality factor is ideal for filter choke applications. Featuring axial lead placement and encapsulated construction, it operates b/w -40 to 125 °C with a DC resistance of 0.1 ohm.
XAL6060-103MEC
Coilcraft XAL6060-103MEC is a shielded, surface mount fixed inductor with 10uH nominal inductance and 7A max rated current. Ideal for power applications, it operates b/w -40 to 125°C, featuring a self-resonance frequency of 14MHz.
74438356047HT
Wuerth Elektronik & Kg
Wurth Elektronik's 74438356047HT is a shielded, dual-ended fixed inductor with 4.7uH nominal inductance and 3A max rated current. Ideal for power applications, it operates b/w -55 to 150°C, featuring a self-resonance frequency of 18MHz and DC resistance of 0.0748 ohm.
DR73-100-R
Eaton Corporation
DR73-100-R by Eaton Corp is a shielded, surface mount fixed inductor with 10uH nominal inductance. It has a max rated current of 2.08A and operates b/w -40 to 125°C. Ideal for power applications requiring general purpose inductors in compact SMT packages.
0603CS-36NXJLU
0603CS-36NXJLU by Coilcraft is a surface mount fixed inductor with 0.036uH nominal inductance, 2080MHz self-resonance frequency, and 125°C max operating temp. Ideal for RF applications due to its 250MHz test frequency and ceramic core material.
B82422A1104K100
TDK B82422A1104K100 is a surface mount fixed inductor with 100uH nominal inductance, 11.5 ohm DC resistance, and 27 min quality factor at L-nom. Ideal for RF applications due to its high Q factor and self-resonance frequency of 7MHz.
5511
Api Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): Toroidal; Shielded: NO; Surface Mount: NO;
IHLP5050FDER4R7M01
Vishay Dale
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Terminal Finish: Tin (Sn);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LQW18CNR47J00D
Murata Manufacturing's LQW18CNR47J00D is a 0603 SMT inductor with 0.47uH nominal inductance, suitable for RF applications. It has a max rated current of 0.5A, self-resonance frequency of 555MHz, and operates b/w -40 to 85°C.
LQW18AN27NG10D
Murata Manufacturing's LQW18AN27NG10D is a wirewound chip inductor with 0.027uH nominal inductance, 2800MHz self-resonance frequency, and 42 min quality factor. Ideal for RF applications, this SMT component operates b/w -55 to 125 °C with a max rated current of 0.59A.
LQW18AN18NG00D
LQW18AN18NG00D by Murata is a wirewound chip inductor with 0.018 uH nominal inductance, suitable for RF applications. Featuring dual-ended terminals and SMT packaging, it operates b/w -55 to 125 °C with a max rated current of 0.55 A. With a min quality factor of 40 at L-nom, this general-purpose inductor has a self-resonance frequency of 5500 MHz.
LQW15AN6N8G00D
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
LQW15AN2N7C00D
LQW15AN2N7C00D by Murata is a wirewound chip inductor with 0.0027 uH nominal inductance, 15000 MHz self-resonance frequency, and 20 min quality factor at L-nom. It is designed for RF applications, featuring dual-ended terminals and matte tin over nickel finish.
LQW15AN8N7G00D
LQW15AN47NJ00D
LQW15AN47NJ00D by Murata is a wirewound chip inductor with 0.047 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and self-resonance frequency of 2900 MHz. With dual-ended terminals and compact 0402 size, it is ideal for surface mount designs requiring high-quality factor components.
LQW15AN12NG00D
LQW15AN12NG00D by Murata is a wirewound chip inductor with 0.012 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and self-resonance frequency of 5500 MHz. This SMT inductor features dual-ended terminals and matte tin finish over nickel, making it ideal for general purpose use.
LQW15AN15NJ00D
LQW15AN5N1C00D
LQW18AN33NG00D
LQW18AN33NG00D by Murata is a wirewound chip inductor with 0.033 uH nominal inductance, suitable for RF applications. It features a max operating temperature of 125°C, matte tin over nickel terminal finish, and self-resonance frequency of 3200 MHz. This general-purpose inductor has a min quality factor of 40 at L-nom and is designed for surface mount with dual-ended terminals.
LQW15AN5N6C10D
LQW15AN3N6B8ZD
LQW15AN10NJ00D
LQW15AN10NJ00D by Murata Manufacturing is a surface mount fixed inductor with a nominal inductance of 0.01 uH. It is a general purpose inductor used for RF applications, with a max rated current of 0.5 A and a self-resonance frequency of 5500 MHz.
LQW18ANR10G00D
LQW15AN10NG00D
LQW15AN11NG00D
Murata Manufacturing's LQW15AN11NG00D is a wirewound chip inductor with 0.011uH nominal inductance, 30 min quality factor at 250 MHz. Ideal for RF applications, it operates b/w -55 to 125 °C with a max current of 0.5A.
LQW15AN1N5B00D
LQW15ANR12J00D
LQW15AN2N5C00D
LQW15AN2N5C00D by Murata is a wirewound chip inductor with 0.0025 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and self-resonance frequency of 15000 MHz. With dual-ended terminals and matte tin finish, it offers high quality factor at 250 MHz test frequency.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved