Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's LQW15AN4N9B00D is a surface mount RF inductor with 0.0049 uH nominal inductance, 8000 MHz self-resonance frequency, and 125 °C max operating temp. Ideal for general purpose applications requiring high quality factor at 250 MHz test frequency.
Median Price
$0.120
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$0.079
1k+ parts
$0.065
10k+ parts
$0.057
Nova Conductors
$0.070
-
Chip Stock
Vyrian
Continental Prestige Electronics
$0.069
Argo Parts USA
$0.068
Netroflash
Aztec Data Supply Inc.
$0.394
AZTECH Wire
$0.830
$0.800
$0.780
$0.770
Corohmni
$0.942
Authorized Procurement Solutions
Surface mount design allows for easy and convenient installation on a PCB, saving space and reducing assembly time.
Dual ended terminals provide flexibility in circuit design and allow for easy connection.
Tested at a high frequency which indicates good performance in RF applications.
Standard size code for compatibility with various devices and circuits.
Secure packing method ensures safe transportation and storage of the inductors.
Specifically designed for RF applications ensuring optimal performance in related circuits.
High maximum operating temperature allows for use in a wide range of environments without compromising performance.
High self-resonance frequency indicates good performance in high-frequency applications.
Low DC resistance minimizes power loss and improves efficiency in the circuit.
Suitable inductance value for various RF applications.
High minimum quality factor ensures good overall performance and efficiency.
Fixed Inductors LQW15AN4N9B00D attributes and parameters. Explore more Fixed Inductors devices from Murata Manufacturing
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
Minimum Quality Factor (at L-nom):
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
LQW15AN4N9B00D Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
Taitron Components
C0603C104K5RACAUTO
KEMET Corporation
KEMET C0603C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with matte tin finish and wraparound terminals.
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
2N7002
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
DP83848IVVX/NOPB
Texas Instruments
Texas Instruments DP83848IVVX/NOPB is a 3.3V Ethernet transceiver with 100000 Mbps data rate, suitable for industrial applications. It features CMOS technology, operates b/w -40 to 85 °C, and comes in a low profile flatpack package with matte tin finish.
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M24308/2-1F
Souriau
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Body or Shell Style: RECEPTACLE; MIL Conformity: YES;
KSZ9031RNXIA
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
Central Semiconductor
STM32H743IIT6
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
STM32H753IIT6
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
LQH32CN100K33L
Murata Manufacturing
Murata Manufacturing's LQH32CN100K33L is a 10uH general purpose inductor with 0.39ohm DC resistance and 26MHz self-resonance frequency. It is a surface mount component suitable for RF applications, featuring dual-ended terminals and a compact 1210 size package.
HC2LP-2R2-R
Coiltronics
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; No. of Functions: 1;
SD53-4R7-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Terminal Shape: WRAPAROUND; Terminal Placement: DUAL ENDED;
LQG15HN1N0S02D
Murata Manufacturing's LQG15HN1N0S02D is a 0402-sized fixed inductor with 0.001 uH nominal inductance, suitable for RF applications. With a max operating temperature of 125 °C and self-resonance frequency of 6000 MHz, it offers high quality factor at 8 and low DC resistance of 0.07 ohm. The dual-ended terminal placement and wraparound shape make it ideal for general purpose use in surface mount technology.
SRN6045-330M
Bourns
Bourns SRN6045-330M is a shielded, surface mount inductor with 33uH nominal inductance and 1.4A max rated current. Ideal for power applications, it features a self-resonance frequency of 9MHz and operates b/w -40°C to 125°C.
DR74-100-R
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
2312-H-RC
The Bourns 2312-H-RC is a shielded fixed inductor with 100uH nominal inductance, suitable for high current applications. It has a max rated current of 7A, DC resistance of 0.037 ohm, and operates b/w -55 to 105°C. Ideal for general purpose use due to its radial terminal placement and toroidal package style.
LQP15MN3N9B02D
LQP15MN3N9B02D by Murata is a chip inductor with 0.0039 uH nominal inductance, 6000 MHz self-resonance frequency, and 13 min quality factor. It is used as an RF inductor for general purpose applications requiring high-frequency performance.
PE-0402CD400KTT
Pulse Electronics
PE-0402CD400KTT by Pulse Electronics is a 0402 wirewound chip inductor with 0.04uH nominal inductance, suitable for RF applications. With a max operating temp of 125°C and self-resonance frequency of 2240MHz, it's ideal for general purpose use in SMT configurations. Featuring dual-ended terminals and ceramic core material, this inductor offers high quality factor and low DC resistance.
DR74-330-R
DR127-100-R
Cooper Industries
CTX100-5-52M-R
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 4; Package Style (Meter): Toroidal; Shielded: NO; Surface Mount: NO;
0402HPH-R10XJRW
Coilcraft
0402HPH-R10XJRW by Coilcraft is a surface mount fixed inductor with 0.1 uH nominal inductance, 250 MHz test frequency, and 1580 MHz self-resonance frequency. Ideal for RF applications due to its rectangular package shape and ceramic core material.
DR74-220-R
NRS4012T100MDGJ
Taiyo Yuden
Taiyo Yuden's NRS4012T100MDGJ is a fixed inductor with 10uH nominal inductance, 1.1A max current, and 30MHz self-resonance freq. Ideal for power applications, this SMT component has dual-ended terminals and operates b/w -25°C to 125°C.
744311470
Wuerth Elektronik & Kg
Wurth Elektronik 744311470 is a chip inductor with 4.7uH nominal inductance, suitable for power applications. It has a max rated current of 6A and operates b/w -40 to 150°C. Ideal for SMT mounting, this general purpose inductor features dual-ended terminals and a self-resonance frequency of 33MHz.
DRA74-4R7-R
GENERAL PURPOSE INDUCTOR; Inductor Application: DC-DC CONVERTER; No. of Terminals: 2; Shielded: YES; Surface Mount: YES; Manufacturer Series: DRA;
5714
Jw Miller Magnetics
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Terminal Placement: RADIAL;
#FSLB2520-470K
Toko
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; DC Resistance: 5.4 ohm;
DR127-470-R
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LQW18AN18NG00D
LQW18AN18NG00D by Murata is a wirewound chip inductor with 0.018 uH nominal inductance, suitable for RF applications. Featuring dual-ended terminals and SMT packaging, it operates b/w -55 to 125 °C with a max rated current of 0.55 A. With a min quality factor of 40 at L-nom, this general-purpose inductor has a self-resonance frequency of 5500 MHz.
LQW18AN27NG10D
Murata Manufacturing's LQW18AN27NG10D is a wirewound chip inductor with 0.027uH nominal inductance, 2800MHz self-resonance frequency, and 42 min quality factor. Ideal for RF applications, this SMT component operates b/w -55 to 125 °C with a max rated current of 0.59A.
LQW15AN6N8G00D
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
LQW18CNR47J00D
Murata Manufacturing's LQW18CNR47J00D is a 0603 SMT inductor with 0.47uH nominal inductance, suitable for RF applications. It has a max rated current of 0.5A, self-resonance frequency of 555MHz, and operates b/w -40 to 85°C.
LQW15AN8N7G00D
LQW15AN12NG00D
LQW15AN12NG00D by Murata is a wirewound chip inductor with 0.012 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and self-resonance frequency of 5500 MHz. This SMT inductor features dual-ended terminals and matte tin finish over nickel, making it ideal for general purpose use.
LQW15AN47NJ00D
LQW15AN47NJ00D by Murata is a wirewound chip inductor with 0.047 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and self-resonance frequency of 2900 MHz. With dual-ended terminals and compact 0402 size, it is ideal for surface mount designs requiring high-quality factor components.
LQW15AN5N1C00D
LQW15AN5N6C10D
LQW15AN3N6B8ZD
LQW15AN2N7C00D
LQW15AN2N7C00D by Murata is a wirewound chip inductor with 0.0027 uH nominal inductance, 15000 MHz self-resonance frequency, and 20 min quality factor at L-nom. It is designed for RF applications, featuring dual-ended terminals and matte tin over nickel finish.
LQW15AN15NJ00D
LQW15AN10NG00D
LQW15AN2N5C00D
LQW15AN2N5C00D by Murata is a wirewound chip inductor with 0.0025 uH nominal inductance, suitable for RF applications. It has a max operating temperature of 125°C and self-resonance frequency of 15000 MHz. With dual-ended terminals and matte tin finish, it offers high quality factor at 250 MHz test frequency.
LQW15AN11NG00D
Murata Manufacturing's LQW15AN11NG00D is a wirewound chip inductor with 0.011uH nominal inductance, 30 min quality factor at 250 MHz. Ideal for RF applications, it operates b/w -55 to 125 °C with a max current of 0.5A.
LQW15AN4N3C00D
LQW15DN100M00D
Murata Manufacturing's LQW15DN100M00D is a shielded SMT inductor with 10uH nominal inductance, 5.405 ohm DC resistance, and 20 MHz self-resonance frequency. Ideal for RF applications, this general-purpose inductor operates b/w -40°C to 85°C with a max rated current of 0.12A.
LQW18AN47NG00D
Murata Manufacturing's LQW18AN47NG00D is a 0603 wirewound chip inductor with 0.047 uH nominal inductance, suitable for RF applications. With a max operating temperature of 125°C and self-resonance frequency of 2600 MHz, it offers high performance in a compact SMT package. The inductor features dual-ended terminals and matte tin over nickel finish, making it ideal for general purpose use.
LQW15AN6N2C00D
Murata Manufacturing's LQW15AN6N2C00D is a wirewound chip inductor with 0.0062 uH nominal inductance, 8000 MHz self-resonance frequency, and 3.23% tolerance. Ideal for RF applications due to its high Q factor at 250 MHz test frequency. Surface mount design with dual-ended terminals makes it suitable for compact electronic devices.
LQW15AN1N7C80D
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved