Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's LQH32MN331J23L is a surface mount fixed inductor with 330uH nominal inductance, 40 min quality factor, and 13 ohm DC resistance. Ideal for RF applications, this general purpose inductor has a max operating temperature of 85°C and self-resonance frequency of 5 MHz.
Median Price
$0.272
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.300
100+ parts
$0.201
1k+ parts
$0.144
10k+ parts
$0.131
DigiKey
$0.165
-
Arrow
$0.119
Verical
$0.244
$0.169
TME
$0.270
$0.177
$0.133
$0.093
Chip Stock
J2 Sourcing AB
LIBRA Elektronik GmbH
Vyrian
Bristol Electronics
$0.188
Nova Conductors
Corohmni
$0.784
AZTECH Wire
$14.310
$13.740
$13.470
$13.200
Kepictronics
Authorized Procurement Solutions
Eastek
GreenTree Electronics
QUARKTWIN TECHNOLOGY LTD
Metaverse IC Inc.
Netroflash
Surface mount capability allows for easy and efficient installation on circuit boards, saving space and making assembly simpler.
Specifically designed for RF applications, ensuring optimal performance in radio frequency circuits.
Provides a high level of inductance, ideal for applications requiring efficient energy storage and electromagnetic interference suppression.
Withstands high temperatures, making it suitable for a wide range of operating environments without performance degradation.
Ferrite core material ensures high magnetic permeability and low losses, maximizing efficiency and reducing electromagnetic interference.
Fixed Inductors LQH32MN331J23L attributes and parameters. Explore more Fixed Inductors devices from Murata Manufacturing
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
Minimum Quality Factor (at L-nom):
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
LQH32MN331J23L Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
1N4148
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
2N2222A
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
First Components International
FDN5618P
FDN5618P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage. It features a single configuration with built-in diode, suitable for switching applications. With 10A IDM and 0.17 ohm RDS(on), it operates in the temperature range of -55 to 150 °C, making it ideal for various electronic devices.
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Dc Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Terminal Form: GULL WING;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LM2931Z-5.0G
LM2931Z-5.0G by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V output voltage, 0.6V dropout voltage, and 0.1A output current. It is ideal for applications requiring stable power supply in temperature-sensitive environments due to its operating range of -40°C to 125°C.
LM2675M-ADJ/NOPB
Texas Instruments
LM2675M-ADJ/NOPB by Texas Instruments is a voltage-mode switching regulator with 1A output current, 37V max output voltage, and 260kHz max switching frequency. Ideal for automotive applications due to its -40°C to 125°C operating temperature range and compact small outline package design.
FDN306P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
OPA2277UA
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
24101C
Datel
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Minimum Operating Temperature: -40 Cel;
IHLP6767GZER101M11
Vishay Intertechnology's IHLP6767GZER101M11 is a shielded, surface mount fixed inductor with 100uH nominal inductance and 5A max rated current. Ideal for RF applications, this general purpose inductor has a self-resonance frequency of 2.1MHz and operates b/w -55°C to 125°C.
#A1313AN-0004GGH=P3
Murata Manufacturing
GENERAL PURPOSE INDUCTOR;
LQW18AN27NG10D
Murata Manufacturing's LQW18AN27NG10D is a wirewound chip inductor with 0.027uH nominal inductance, 2800MHz self-resonance frequency, and 42 min quality factor. Ideal for RF applications, this SMT component operates b/w -55 to 125 °C with a max rated current of 0.59A.
LQM21FN100N00L
Murata Manufacturing's LQM21FN100N00L is an 0805 chip inductor with 10uH nominal inductance, suitable for RF applications. It features dual-ended terminals, ferrite core material, and a max operating temperature of 85°C. Ideal for general purpose use with a self-resonance frequency of 15MHz and DC resistance of 0.65 ohm.
LQH44PN100MP0L
Murata Manufacturing's LQH44PN100MP0L is a shielded, surface mount fixed inductor with 10uH nominal inductance and 1.17A max rated current. Ideal for power applications, this general purpose inductor has a self-resonance frequency of 25MHz and operates b/w -40°C to 125°C.
P1252.602T
Pulse Electronics
P1252.602T by Pulse Electronics is a fixed inductor with 6uH nominal inductance, 7.5A max current, and -40 to 130°C operating temp range. It's a power inductor for general purpose applications, featuring dual-ended terminals and ferrite core material in a cylindrical SMT package.
CTIHLP5024F-330M
Central Technologies
CTIHLP5024F-330M by Central Technologies is a shielded, surface mount fixed inductor with 33uH nominal inductance. It has a max rated current of 4A and operates b/w -55 to 125°C. Ideal for power applications requiring general purpose inductors with dual-ended terminals.
NLCV32T-100K-PFR
TDK
NLCV32T-100K-PFR by TDK is a 10uH power inductor with 2 terminals, WRAPAROUND shape, and 125°C max temp. Ideal for general purpose applications, it has a self-resonance frequency of 30MHz and 0.42 ohm DC resistance.
NLCV32T-100K-PFRD
Z-7E
Ohmite Manufacturing
Z-7E by Ohmite Manufacturing is a radial fixed inductor with 84uH nominal inductance, 1A max current, and 13MHz self-resonance freq. Ideal for RF applications due to its single-layer construction and flat terminal shape in a tubular package.
CTX100-2-52LP-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Manufacturer Series: CTX100-2-52LP-R;
DRA127-151-R
Eaton Corporation
Eaton Corporation's DRA127-151-R is a shielded, fixed inductor with 151.2uH nominal inductance and 1.52A max rated current. Ideal for power applications, this SMT component has dual-ended terminals and operates b/w -40°C to 165°C.
SRR1210-680M
Bourns
Bourns SRR1210-680M is a shielded, surface mount fixed inductor with 68uH nominal inductance. It has a max rated current of 3A and operates b/w -40 to 125°C. Ideal for power applications, this general purpose inductor features a self-resonance frequency of 3.8MHz and DC resistance of 0.102 ohm.
SRN3015-1R0Y
Bourns SRN3015-1R0Y is a shielded, surface mount fixed inductor with 1uH nominal inductance and 2.35A max rated current. Ideal for power applications, it operates b/w -40°C to 125°C with a self-resonance frequency of 145MHz.
MLZ2012N220LT
The TDK MLZ2012N220LT is a shielded, surface mount fixed inductor with 22uH nominal inductance. Ideal for RF applications, it operates b/w -55°C to 125°C, with a max rated current of 0.3A and DCR measured at 30% tolerance.
XFL4020-152MEB
Coilcraft
Coilcraft XFL4020-152MEB is a shielded, surface mount fixed inductor with 1.5uH nominal inductance and 9.1A max rated current. Ideal for power applications, it has a self-resonance frequency of 59MHz and operates b/w -40°C to 125°C.
DR74-220-R
Cooper Industries
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
B82733F2142B001
TDK's B82733F2142B001 is a dual in-line fixed inductor with 27000 uH nominal inductance, suitable for power applications. It has a max rated current of 1.4 A and operates b/w -40 to 125 °C, featuring a ferrite core and flat terminals. Ideal for PCB mounting, this general purpose inductor offers low DC resistance at 0.44 ohm.
744772100
Wuerth Elektronik & Kg
Wurth Elektronik 744772100 is a general purpose inductor with 10uH nominal inductance, 2.6A max current, and -40 to 125°C operating temp range. Used as a filter choke in applications requiring radial terminal placement and cylindrical package shape.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LQH32CN221K23L
Murata Manufacturing's LQH32CN221K23L is a 220uH fixed inductor with dual-ended terminals, suitable for RF applications. Featuring a self-resonance frequency of 6.8MHz and max rated current of 0.07A, this SMT inductor has a compact size of 3.2mm x 2.5mm x 2mm, making it ideal for general purpose use in electronic circuits.
LQH32PHR47NNCL
Murata Manufacturing's LQH32PHR47NNCL is a shielded SMT inductor with 0.47uH nominal inductance, 2.9A max current, and 30% tolerance. Ideal for RF applications, it operates b/w -40 to 125 °C with a self-resonance frequency of 100 MHz.
LQH32PHR47NN0L
Murata Manufacturing's LQH32PHR47NN0L is a shielded, surface mount fixed inductor with 0.47uH nominal inductance. With 2.55A max rated current and -40 to 125°C operating temperature range, it's ideal for power applications requiring general purpose inductors. The compact 1210 size package makes it suitable for various SMT designs.
LQH32CN100K33L
Murata Manufacturing's LQH32CN100K33L is a 10uH general purpose inductor with 0.39ohm DC resistance and 26MHz self-resonance frequency. It is a surface mount component suitable for RF applications, featuring dual-ended terminals and a compact 1210 size package.
LQH32MN3R3K23L
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
LQH32CN100K23L
LQH32CN100K23L by Murata is a 10uH general purpose inductor with 0.3A max current and 26MHz self-resonance freq. Ideal for RF applications, it's a surface mount component with dual-ended terminals and operates b/w -40°C to 85°C.
LQH32PN100MNCL
LQH32PN2R2NN0L
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
LQH32CN470K23L
Murata Manufacturing's LQH32CN470K23L is a 47uH power inductor with 1.69 ohm DC resistance, suitable for general purpose applications. It features a max rated current of 0.17A and operates b/w -40 to 85°C temperatures. This SMT inductor has dual-ended terminals and measures 3.2mm x 2.5mm x 2mm in size, making it ideal for various electronic devices requiring efficient power management.
LQH32CN2R2M33L
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
LQH32CN1R0M33L
LQH32CN220K23L
LQH3NPN221MGRL
LQH32CN100K53L
LQH3NPN100MJRL
Murata Manufacturing's LQH3NPN100MJRL is a shielded, surface mount fixed inductor with 10uH nominal inductance and 1.2A max rated current. Ideal for power applications, it operates b/w -40 to 125°C with a self-resonance frequency of 30MHz.
LQH32CN4R7M33L
LQH32CN101K23L
LQH32PN100MN0L
Murata Manufacturing's LQH32PN100MN0L is a shielded, dual-ended SMT inductor with 10uH nominal inductance. Ideal for RF applications, it has a max rated current of 0.7A and operates b/w -40 to 125°C.
LQH31MN3R3K03L
LQH31CN100K03L
LQH31CN100K03L by Murata Manufacturing is a surface mount fixed inductor with a nominal inductance of 10 uH. It has a max rated current of 0.23 A and is commonly used as a power inductor in general purpose applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved