Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's LQH31MN101J03L is a 100uH fixed inductor with 40 min. quality factor, suitable for RF applications. It has a max operating temp of 85°C, DC resistance of 15.6 ohm, and self-resonance frequency of 7 MHz, making it ideal for general purpose use in compact SMT designs.
Median Price
$0.181
Lifecycle Status
Suppliers In-Stock
10
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$0.172
1k+ parts
10k+ parts
-
Mouser Electronics
$0.670
$0.350
Verical
Chip1Stop
Nova Conductors
$0.275
Chip Stock
Lakeland Logistics Inc
Bristol Electronics
$0.685
$0.475
Dan-Mar Components
Vyrian
Continental Prestige Electronics
$0.270
Argo Parts USA
$0.267
AZTECH Wire
$1.110
$1.070
$1.040
$1.020
Perfect Parts
Kepictronics
Netroflash
$0.261
$0.256
The surface mount capability allows for easy and convenient installation on PCBs, saving space and reducing assembly time.
The high test frequency of 2.5 MHz ensures accurate and reliable performance in RF applications.
With a high nominal inductance of 100 uH, this inductor can efficiently store and release energy in RF circuits.
The high maximum operating temperature of 85°C allows for versatility in different operating environments.
The high maximum rated current of 0.045 A ensures that the inductor can handle demanding current loads without overheating.
The low DC resistance of 15.6 ohm minimizes power losses and improves efficiency in the circuit.
Fixed Inductors LQH31MN101J03L attributes and parameters. Explore more Fixed Inductors devices from Murata Manufacturing
Inductor Type:
Inductor Application:
Nominal Inductance:
Maximum Rated Current:
Minimum Quality Factor (at L-nom):
DC Resistance:
Tolerance:
No. of Functions:
Self Resonance Frequency:
Test Frequency:
Special Feature:
Package Shape:
Case or Size Code:
Shielded:
Construction:
Core Material:
Surface Mounted:
Minimum Operating Temperature:
Maximum Operating Temperature:
Terminal Position:
Terminal Shape:
Terminal Finish:
No. of Terminals:
Package Style:
Package Length:
Package Height:
Package Width:
Packing Method:
JESD-609 Code:
LQH31MN101J03L Inductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - Mult Series 01/Oct/2022
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Taiwan Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
1N4148
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
IRLML6401TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Minimum Operating Temperature: -55 Cel; Avalanche Energy Rating (EAS): 33 mJ;
SMMBT3904LT1G
Onsemi
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
General Semiconductor
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
MBR1560CT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Operating Temperature: 150 Cel; Maximum Repetitive Peak Reverse Voltage: 60 V; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 150 A;
Meritek Electronics
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
IDCP2218ER101M
Vishay Intertechnology
Vishay Intertechnology's IDCP2218ER101M is a surface mount fixed inductor with 100uH nominal inductance, 0.7 ohm DC resistance, and 0.52A max rated current. Ideal for high current applications, this general purpose inductor features a ferrite core and operates b/w -40°C to 125°C.
5609
Jw Miller Magnetics
GENERAL PURPOSE INDUCTOR; Inductor Application: HIGH CURRENT INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Test Frequency: .001 MHz;
LQH32CN100K33L
Murata Manufacturing
Murata Manufacturing's LQH32CN100K33L is a 10uH general purpose inductor with 0.39ohm DC resistance and 26MHz self-resonance frequency. It is a surface mount component suitable for RF applications, featuring dual-ended terminals and a compact 1210 size package.
B78108S1472K000
TDK
B78108S1472K000 by TDK is a 4.7 uH general purpose inductor with 0.34 ohm DC resistance and 95 MHz self-resonance frequency. It has a max operating temperature of 125°C, making it suitable for RF applications requiring high Q factor and reliability in harsh environments. The axial package style with tubular construction and tin finish is ideal for RF circuits where space-saving and performance are crucial.
DR74-4R7-R
Cooper Electronic Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
SDR0403-2R2ML
Bourns
Bourns SDR0403-2R2ML is a surface mount fixed inductor with 2.2uH nominal inductance, 125°C max temp, and 2.6A max current rating. Ideal for power applications, this general purpose inductor has a compact rectangular package (4.5mm x 4mm x 3.2mm) and operates at frequencies up to 80MHz.
DR125-330-R
Cooper Industries
B82733F2142B001
TDK's B82733F2142B001 is a dual in-line fixed inductor with 27000 uH nominal inductance, suitable for power applications. It has a max rated current of 1.4 A and operates b/w -40 to 125 °C, featuring a ferrite core and flat terminals. Ideal for PCB mounting, this general purpose inductor offers low DC resistance at 0.44 ohm.
DR127-330-R
CTX100-5-52M-R
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 4; Package Style (Meter): Toroidal; Shielded: NO; Surface Mount: NO;
SRR1260-331K
Bourns SRR1260-331K is a shielded, dual-ended fixed inductor with 330uH nominal inductance. Ideal for power applications, it has a max rated current of 1.15A and operates b/w -40 to 125°C. Its compact SMT package measures 12.5mm x 12.5mm x 6mm, making it suitable for general purpose use.
MLZ2012N101LT000
MLZ2012N101LT000 by TDK is an 0805 fixed inductor with 100uH nominal inductance, suitable for general purpose applications. It features dual-ended terminals, ferrite core material, and a max operating temperature of 125°C. With a DC resistance of 3.5 ohm and rated current of 0.14A, it is ideal for surface mount designs requiring high-quality shielding.
24101C
C&d Technologies
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: YES; Minimum Operating Temperature: -40 Cel;
5712
The Bourns 5712 is a fixed inductor with a nominal inductance of 150 uH and max rated current of 4.75 A. It features radial terminal placement, toroidal construction, and is ideal for high current applications. With a DC resistance of 0.046 ohm and operating temperature range from -55 to 105 °C, it's a general-purpose inductor suitable for various electronic circuits.
LQW15AN3N6B8ZD
Murata Manufacturing's LQW15AN3N6B8ZD is a fixed inductor with 0402 size, 0.0036 uH nominal inductance, and 1.95 A max rated current. Ideal for RF applications, it features dual-ended terminals and operates b/w -55 to 125 °C with a Q factor of at least 30 at 250 MHz.
LQW18AN47NG00D
Murata Manufacturing's LQW18AN47NG00D is a 0603 wirewound chip inductor with 0.047 uH nominal inductance, suitable for RF applications. With a max operating temperature of 125°C and self-resonance frequency of 2600 MHz, it offers high performance in a compact SMT package. The inductor features dual-ended terminals and matte tin over nickel finish, making it ideal for general purpose use.
SRR1208-100ML
Bourns SRR1208-100ML is a shielded, surface mount inductor with 10uH nominal inductance and 5A max rated current. Ideal for power applications, it operates b/w -40 to 125°C with a self-resonance frequency of 15MHz.
DR73-100-R
5248
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Shielded: NO; Surface Mount: NO; Nominal Inductance (L): 68 uH;
B82476A1103M000
B82476A1103M000 by TDK is a fixed inductor with 10uH nominal inductance, 3.9A max rated current, and -55 to 150°C operating temperature range. Ideal for power applications, this SMT inductor features dual-ended terminals and ferrite core material.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LQH32CN221K23L
Murata Manufacturing's LQH32CN221K23L is a 220uH fixed inductor with dual-ended terminals, suitable for RF applications. Featuring a self-resonance frequency of 6.8MHz and max rated current of 0.07A, this SMT inductor has a compact size of 3.2mm x 2.5mm x 2mm, making it ideal for general purpose use in electronic circuits.
LQH32PHR47NNCL
Murata Manufacturing's LQH32PHR47NNCL is a shielded SMT inductor with 0.47uH nominal inductance, 2.9A max current, and 30% tolerance. Ideal for RF applications, it operates b/w -40 to 125 °C with a self-resonance frequency of 100 MHz.
LQH32PHR47NN0L
Murata Manufacturing's LQH32PHR47NN0L is a shielded, surface mount fixed inductor with 0.47uH nominal inductance. With 2.55A max rated current and -40 to 125°C operating temperature range, it's ideal for power applications requiring general purpose inductors. The compact 1210 size package makes it suitable for various SMT designs.
LQH32MN3R3K23L
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
LQH32CN100K23L
LQH32CN100K23L by Murata is a 10uH general purpose inductor with 0.3A max current and 26MHz self-resonance freq. Ideal for RF applications, it's a surface mount component with dual-ended terminals and operates b/w -40°C to 85°C.
LQH32PN100MNCL
LQH32PN2R2NN0L
GENERAL PURPOSE INDUCTOR; Inductor Application: RF INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: YES; Surface Mount: YES;
LQH32CN470K23L
Murata Manufacturing's LQH32CN470K23L is a 47uH power inductor with 1.69 ohm DC resistance, suitable for general purpose applications. It features a max rated current of 0.17A and operates b/w -40 to 85°C temperatures. This SMT inductor has dual-ended terminals and measures 3.2mm x 2.5mm x 2mm in size, making it ideal for various electronic devices requiring efficient power management.
LQH32CN2R2M33L
GENERAL PURPOSE INDUCTOR; Inductor Application: POWER INDUCTOR; No. of Terminals: 2; Package Style (Meter): SMT; Shielded: NO; Surface Mount: YES;
LQH32CN1R0M33L
LQH32CN220K23L
LQH3NPN221MGRL
LQH32CN100K53L
LQH3NPN100MJRL
Murata Manufacturing's LQH3NPN100MJRL is a shielded, surface mount fixed inductor with 10uH nominal inductance and 1.2A max rated current. Ideal for power applications, it operates b/w -40 to 125°C with a self-resonance frequency of 30MHz.
LQH32CN4R7M33L
LQH32CN101K23L
LQH32PN100MN0L
Murata Manufacturing's LQH32PN100MN0L is a shielded, dual-ended SMT inductor with 10uH nominal inductance. Ideal for RF applications, it has a max rated current of 0.7A and operates b/w -40 to 125°C.
LQH31MN3R3K03L
LQH31CN100K03L
LQH31CN100K03L by Murata Manufacturing is a surface mount fixed inductor with a nominal inductance of 10 uH. It has a max rated current of 0.23 A and is commonly used as a power inductor in general purpose applications.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved