Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's GRT21BR61E106KE13L is a ceramic capacitor with 10uF capacitance, X5R temperature characteristics, and 25V rated DC voltage. It is used in surface mount applications for automotive electronics due to its AEC-Q200 standard compliance and compact SMT package design.
Median Price
$0.560
Lifecycle Status
Suppliers In-Stock
7
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.236
1k+ parts
$0.191
10k+ parts
$0.172
DigiKey
$0.235
$0.179
$0.151
Newark
$0.668
$0.291
$0.224
-
Nova Conductors
$0.210
Vyrian
Sensible Micro Corp
ComSIT Distribution GmbH
Corohmni
$0.112
Argo Parts USA
$0.203
Continental Prestige Electronics
$0.205
Aztec Data Supply Inc.
$0.230
Authorized Procurement Solutions
Netroflash
$0.199
$0.195
Ceramic is a popular choice for capacitors as it offers high insulation resistance and stability over a wide range of temperatures.
Rectangular package shape makes it easy to mount and integrate this capacitor in various electronic circuits.
Multi-layer design allows for higher capacitance values in a compact form, making it suitable for space-constrained applications.
Embossed packing ensures protection during shipping and handling, maintaining the quality of the product.
Two terminals allow for simple and secure connections, ensuring reliable performance.
Surface mount technology makes it easy to install this capacitor on PCBs, saving space and improving assembly efficiency.
Wraparound terminal shape provides mechanical stability and ease of soldering, ensuring a strong connection.
10% negative tolerance ensures that the actual capacitance value will not exceed this limit, providing consistent performance.
X5R temperature characteristics indicate stable capacitance over a wide temperature range, making it suitable for various environmental conditions.
With a high maximum operating temperature, this capacitor can withstand elevated temperatures without compromising performance.
Ceramic capacitors are reliable and durable, making them suitable for a wide range of applications in different industries.
With a low temperature coefficient, this capacitor offers stable performance over temperature variations, ensuring accuracy in electronic circuits.
Tin over nickel terminal finish provides good conductivity and corrosion resistance, ensuring long-term reliability.
Surface mounting feature simplifies the installation process, saving time and effort during assembly.
Compact height allows for space-efficient design and integration in small electronic devices.
Narrow width enables compact circuit designs, ideal for applications with limited board space.
Short length contributes to a small footprint, making it suitable for miniaturized electronic devices.
10% positive tolerance ensures that the actual capacitance will not be lower than this limit, providing consistent performance.
With a capacitance of 10 uF, this capacitor offers sufficient charge storage capacity for various circuit applications.
Compliance with AEC-Q200 standard ensures high reliability and quality standards suitable for automotive applications.
With a rated DC voltage of 25V, this capacitor can be safely used in circuits with higher voltage requirements.
Fixed Capacitors GRT21BR61E106KE13L attributes and parameters. Explore more Fixed Capacitors devices from Murata Manufacturing
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Reference Standard:
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
GRT21BR61E106KE13L Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
EU2B-YS3103F
Idec
ROTARY SWITCH;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS84-7-F
SPC TECHNOLOGY/ MULTICOMP
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Transistor Element Material: SILICON;
M39029/56-351
Itt Cannon
CONNECTOR ACCESSORY; MIL Conformity: YES; Terminal Type: WIRE; IEC Conformity: NO; Alternate Contact Sources: ITT CANNON; Associated Military - Specifications: MIL-C-38999;
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
LM555CM
Onsemi
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
CC0603KRX7R9BB103
Yageo
Yageo CC0603KRX7R9BB103 is a 0603 SMT ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS130LT3G
MBRS130LT3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.445V. It operates b/w -65 to 125°C, has a reverse test voltage of 30V, and is ideal for power applications due to its small outline package style.
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
C0603C104J4RACTU
KEMET Corporation
KEMET C0603C104J4RACTU is a ceramic capacitor with capacitance of 0.1uF, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for surface mount applications in various electronic circuits due to its compact size and high reliability.
CGA4J1X7R1V475K125AE
TDK
CGA4J1X7R1V475K125AE by TDK is a ceramic capacitor with 4.7uF capacitance, rated at 35V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
GRM188R71E104KA01D
Murata Manufacturing
Murata Manufacturing's GRM188R71E104KA01D is a ceramic capacitor with 0.1uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
EEEFT1E101AP
Panasonic
Panasonic EEEFT1E101AP is a 100uF aluminum electrolytic capacitor with 25V rated DC voltage. It features tan delta of 0.14, leakage current of 0.025mA, and ripple current of 195mA. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -55°C to 105°C.
0603B104K500CT
Fenghua Advanced Technology
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRM155R71H104KE14J
The Murata Manufacturing GRM155R71H104KE14J is a ceramic capacitor with capacitance of 0.1uF, rated at 50V URdc. It has a temperature coefficient of 15% and operates b/w -55°C to 125°C. Ideal for surface mount applications in various electronic devices requiring stable capacitance under changing temperatures.
C0805C474K4RACTU
The KEMET C0805C474K4RACTU is a ceramic capacitor with 0.47uF capacitance and 16V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C. Ideal for surface mount applications in various electronic circuits due to its compact rectangular package design.
C2012X5R1V226M125AC
The TDK C2012X5R1V226M125AC is a ceramic capacitor with 22uF capacitance and 35V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring reliable energy storage.
M39006/30-0038
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 430 uF; Rated DC Voltage (URdc): 8 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
CC0603KRX7R9BB101
Yageo CC0603KRX7R9BB101 is a SMT ceramic capacitor with 0.0001uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for applications requiring compact size, high reliability, and stable performance in various electronic circuits.
C0402C104K8PACTU
KEMET Corporation's C0402C104K8PACTU is a ceramic capacitor with 0.1uF capacitance and 10V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55°C to 85°C. Ideal for surface mount applications in electronics due to its compact size and wraparound terminals.
C1608X7R1E104K080AA
The TDK C1608X7R1E104K080AA is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 25V. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
530L104KT16T
KYOCERA AVX
530L104KT16T by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 16V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
GRM188R61E106MA73D
GRM188R61E106MA73D by Murata is a ceramic capacitor with 10uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring compact, high-performance capacitors.
VY1222M47Y5UQ63V0
Vishay Bc Components
CERAMIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .0022 uF; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Temperature Characteristics Code: Y5U;
C0603C102J5GACTU
The KEMET Corporation C0603C102J5GACTU is a ceramic capacitor with 0.001uF capacitance and 50V rated DC voltage. Featuring a temperature coefficient of 30ppm/°C, it operates b/w -55 to 125 °C making it ideal for high precision applications requiring stable performance in varying temperatures. With a compact SMT package style, this fixed capacitor is suitable for surface mount designs in electronic circuits.
C1206C105K3RACTU
C1206C105K3RACTU by KEMET Corporation is a ceramic capacitor with a capacitance of 1 uF and a rated DC voltage of 25 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
M39006/22-0351
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C1608X7R1H474K080AC
C1608X7R1H474K080AC by TDK is a ceramic capacitor with a capacitance of 0.47 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
T491A475K016AT
Cornell Dubilier Electronics
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
GRT21BR61E226ME13L
GRT21BR61E226ME13L by Murata Manufacturing is a ceramic capacitor with a capacitance of 22 uF and a rated DC voltage of 25 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 85 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
GRT21BR61H475KE13L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
GRT21BR71H105KE01L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRT21BR60J476ME13L
Murata Manufacturing's GRT21BR60J476ME13L is a ceramic capacitor with 47uF capacitance, rated at 6.3V. It features X5R temperature characteristics, -55 to 85°C operating range, and AEC-Q200 standard compliance. Ideal for surface mount applications in automotive electronics due to its compact size and high reliability.
GRT21BR71H104KE01L
GRT21BR70J106KE13L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRT21BR61H225KE13L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
GRT21BR71H474KE01L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRT21BC71H475KE13L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRT21BC80G476ME13L
Murata Manufacturing's GRT21BC80G476ME13L is a ceramic capacitor with 47uF capacitance, rated at 4V. It has a temperature coefficient of 22% and operates b/w -55°C to 105°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
GRT21BR71E225KE13L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRT21BC81A226ME13K
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: CERAMIC;
GRT21BC81A226ME13L
Murata Manufacturing's GRT21BC81A226ME13L is a ceramic capacitor with 22uF capacitance, X6S temp code, and 10V rated DC voltage. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and -55°C to 105°C operating range.
GRT21BR61C226ME13L
Murata Manufacturing's GRT21BR61C226ME13L is a ceramic capacitor with 22uF capacitance, rated at 16V. It has X5R temperature characteristics and operates b/w -55 to 85 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
GRT21BR61E475KA02L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
GRT21BC71E475KE13L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRT21BC71E106KE13L
Murata Manufacturing's GRT21BC71E106KE13L is an 0805 SMT ceramic capacitor with 10uF capacitance, rated at 25V. With X7S temperature characteristics and -55 to 125°C operating range, it suits automotive applications meeting AEC-Q200 standards. Its compact size and wraparound terminals make it ideal for surface mount designs in various electronic devices.
GRT21BR60J226ME13L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
GRT21BC71E106KE13K
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRT21BR61E106KE13K
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved