Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's GRT188R61E475KE13D is a ceramic capacitor with 4.7uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and 10% tolerance. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
Median Price
$0.069
Lifecycle Status
Suppliers In-Stock
21
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$0.230
100+ parts
$0.081
1k+ parts
$0.058
10k+ parts
$0.041
DigiKey
$0.270
$0.099
$0.070
-
Newark
$0.048
Element14
$0.155
Avnet
Verical
$0.086
$0.046
Arrow
$0.027
Chip1Stop
$0.038
RS (Exports)
$0.060
Maritex
$0.054
Nova Conductors
$0.084
Bristol Electronics
$0.225
$0.113
$0.045
$0.034
TME
$0.078
$0.051
$0.036
Vyrian
Chip Stock
Sensible Micro Corp
ComSIT Distribution GmbH
NAC Semi
$0.026
IBS Electronics
$0.039
Rutronik
$0.025
Prism Electronics
Semicontronic
$0.012
Aztec Data Supply Inc.
$0.020
Advanced Electronics
$0.073
Aranea Global
$0.083
$0.079
Argo Parts USA
$0.082
Corohmni
$0.546
Eastek
$0.050
Formix International (Excess)
Perfect Parts
Infinite Electronics LLP (Excess)
Abacus Technologies
Continental Prestige Electronics
$0.066
Robosynatics
Lucentia Tech
$0.313
$0.306
Speed Components Ltd (Excess)
Ceramic dielectric material provides high stability and reliability, making this capacitor suitable for a wide range of applications.
Rectangular package shape allows for efficient storage and handling of the capacitors, making them easy to work with during assembly.
Multi-layer construction provides high capacitance in a compact size, ideal for applications where space is limited.
With a high maximum operating temperature, this capacitor can withstand elevated temperatures without sacrificing performance.
The capacitance rating of 4.7 uF makes this capacitor suitable for various filtering and coupling applications in electronic circuits.
With a rated DC voltage of 25 V, this capacitor can handle voltage fluctuations and provide stable performance in different circuit configurations.
Fixed Capacitors GRT188R61E475KE13D attributes and parameters. Explore more Fixed Capacitors devices from Murata Manufacturing
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Reference Standard:
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
GRT188R61E475KE13D Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
1N4148
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99-7-F
Diodes Incorporated
Diodes Inc. BAV99-7-F is a series-connected, center tap diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.004 us and can handle up to 0.3A output current. Ideal for rectification applications requiring fast switching and low reverse current requirements.
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Synsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
BAV99
Vishay Sprague
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
CRG0805F10K
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
BSS123-7-F
BSS123-7-F by Diodes Inc. is a N-channel FET with 100V DS breakdown voltage and 0.17A drain current. Ideal for switching applications, it features a single configuration with built-in diode, operates in enhancement mode, and has a max power dissipation of 0.3W.
EU2B-YS2J03F
Idec
ROTARY SWITCH;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
1N4148WS
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Changzhou Galaxy Century Microelectronics
C0603C104M5RACTU
KEMET C0603C104M5RACTU is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±20% tolerance. Ideal for SMT applications due to its rectangular shape, wraparound terminals, and compact size of 1.6x0.8x0.8mm.
EEVFK1J471M
Panasonic
Panasonic EEVFK1J471M is a 470uF Aluminum Electrolytic Capacitor with 63V URdc. It features Tan Delta of 0.08, Leakage Current of 0.2961mA, and Ripple Current of 1057.5mA, making it ideal for automotive applications due to AEC-Q200 compliance and operating temperatures ranging from -55°C to 105°C.
CK05BX104K
Defense Logistics Agency
CERAMIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
0805B104K500CT
Fenghua Advanced Technology
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
C3216X7R2A105K160AA
TDK
TDK's C3216X7R2A105K160AA is a 1uF ceramic capacitor with 10% tolerance, X7R temperature coefficient, and 100V rated DC voltage. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range from -55 to 125°C.
M39006/22-0360
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 160 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
T491A105K016AT
Cornell Dubilier Electronics
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
GRM32ER71A476KE15L
Murata Manufacturing
Murata Manufacturing's GRM32ER71A476KE15L is a ceramic capacitor with 47uF capacitance, 10V rated DC voltage, and X7R temperature characteristics. It is ideal for surface mount applications in electronics requiring stable performance at temperatures ranging from -55 to 125°C.
C0402C103K3RACAUTO
KEMET C0402C103K3RACAUTO is a ceramic capacitor with 0.01uF capacitance, rated for 25V DC voltage. It has X7R temperature characteristics and -55 to 125°C operating range. Ideal for automotive applications meeting AEC-Q200 standard, it's a compact SMT component with wraparound terminals.
EEE1HA101UAP
Panasonic EEE1HA101UAP is a 100uF aluminum electrolytic capacitor with 50V rated DC voltage. It features tan delta of 0.18, leakage current of 0.05mA, and ripple current of 200mA. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -40°C to 85°C.
C0805C101K5GACTU
KEMET Corporation's C0805C101K5GACTU is a ceramic capacitor with 10% negative tolerance, C0G temperature characteristics, and 0.0001 uF capacitance. Ideal for surface mount applications in electronics, it operates b/w -55 to 125 °C with a rated DC voltage of 50 V.
GRM31CR71E106KA12L
GRM31CR71E106KA12L by Murata is a ceramic capacitor with 10uF capacitance and 25V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it suitable for various applications in electronics requiring stable performance in a compact SMT package.
GRM32EC81C476KE15L
Murata Manufacturing's GRM32EC81C476KE15L is a ceramic capacitor with 47uF capacitance and 16V rated DC voltage. With X6S temperature characteristics, it operates b/w -55 to 105 °C, making it ideal for SMT applications requiring high reliability in compact designs. Its multi-layer design and matte tin over nickel terminal finish ensure stable performance in various electronic devices.
M39006/22-0351
Vishay Intertechnology's M39006/22-0351 is a TANTALUM CAPACITOR with 47uF capacitance, 50V URdc, and 0.11 Tan Delta. Ideal for MIL-PRF-39006/22 applications requiring high ripple current (311.85mA) and low leakage current (0.001mA). Suitable for temperatures ranging from -55 to 125 °C in through-hole mounting setups.
C1608X5R1E106M080AC
C1608X5R1E106M080AC by TDK is a ceramic capacitor with a capacitance of 10 uF and a rated DC voltage of 25 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 85 °C. This capacitor is commonly used in surface mount applications.
M39006/220351
M39006/220351 by Cornell Dubilier Electronics is a TANTALUM CAPACITOR with 47uF capacitance, 50V URdc, and 0.11 Tan Delta. It has a leakage current of 0.001mA and operates b/w -55 to 125 °C. Ideal for applications requiring high ripple current handling in military-grade equipment per MIL-C-39006/22 standard.
UMK105B7104KV-FR
Taiyo Yuden
UMK105B7104KV-FR by Taiyo Yuden is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It features X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and high reliability in various electronic circuits.
M39006/220350
M39006/220350 by Cornell Dubilier Electronics is a TANTALUM (WET) capacitor with a capacitance of 47 uF and rated DC voltage of 50 V. It has a tan delta of 0.11, leakage current of 0.001 mA, and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in through hole mount applications.
12105C475K4Z2A
KYOCERA AVX
12105C475K4Z2A by KYOCERA AVX is a ceramic capacitor with 4.7uF capacitance, rated for 50V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications requiring compact, high-performance capacitors with negative tolerance of 10%.
M39006/25-0072
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
GRT155R71E103KE01D
Murata Manufacturing's GRT155R71E103KE01D is a ceramic capacitor with 0.01uF capacitance, X7R temperature characteristics, and 25V rated DC voltage. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 standard compliance and compact 0402 size.
GRT188R61H105KE13D
Murata Manufacturing's GRT188R61H105KE13D is a ceramic capacitor with 1uF capacitance, X5R temperature characteristics, and 50V rated DC voltage. It is used in surface mount applications for automotive electronics due to its AEC-Q200 standard compliance and compact SMT package design.
GRT188R61C106KE13D
Murata Manufacturing's GRT188R61C106KE13D is a ceramic capacitor with 10uF capacitance, 16V rated DC voltage, and X5R temperature characteristics. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 compliance and compact SMT package design.
GRT155R71H103KE01D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRT155R61E105KE01D
Murata Manufacturing's GRT155R61E105KE01D is a ceramic capacitor with 1uF capacitance, X5R temperature characteristics, and 25V rated DC voltage. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and compact SMT package design.
GRT155R70J105KE01D
Murata Manufacturing's GRT155R70J105KE01D is a ceramic capacitor with 1uF capacitance, X7R temperature characteristics, and 10% tolerance. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and 6.3V rated DC voltage.
GRT188R61E106ME13D
Murata Manufacturing's GRT188R61E106ME13D is a ceramic capacitor with 10uF capacitance, X5R temperature characteristics, and 25V rated DC voltage. It is used in surface mount applications for automotive electronics due to AEC-Q200 standard compliance and compact 0603 package size.
GRT188C81E475KE13D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: CERAMIC;
GRT155R61A105KE01D
Murata Manufacturing's GRT155R61A105KE01D is a ceramic capacitor with 1uF capacitance, X5R temperature characteristics, and 10V rated DC voltage. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 standard compliance and compact SMT package design.
GRT155R61E225KE13D
Murata Manufacturing's GRT155R61E225KE13D is a ceramic capacitor with 2.2uF capacitance, rated at 25V. It has X5R temperature characteristics and operates b/w -55 to 85°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
GRT188R71E105KE13D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRT188R71H104KE13D
GRT155C71A225KE13D
Murata Manufacturing's GRT155C71A225KE13D is a ceramic capacitor with 2.2uF capacitance, rated for 10V. It features X7S temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
GRT155C81E105KE13D
Murata Manufacturing's GRT155C81E105KE13D is a ceramic capacitor with 1uF capacitance, rated for 25V. It has X6S temp characteristics, -55 to 105°C operating range, and ±10% tolerance. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and compact SMT package design.
GRT188R61H225KE13D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
GRT155R71H221KE01D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .00022 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRT1555C1H100JA02D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .00001 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRT1555C1H101JA02D
Murata Manufacturing's GRT1555C1H101JA02D is a ceramic capacitor with capacitance of 0.0001uF, rated for 50V. It has a temperature coefficient of 30ppm/°C and operates b/w -55 to 125 °C. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and compact size (1x0.5x0.5mm).
GRT188C71C475KE13D
Murata Manufacturing's GRT188C71C475KE13D is a ceramic capacitor with 4.7uF capacitance, rated for 16V. It has X7S temperature characteristics and operates b/w -55 to 125°C. Ideal for automotive applications meeting AEC-Q200 standard.
GRT188R61E475ME13D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved