Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's GR443QR73D222KW01L is a ceramic capacitor with 0.0022uF capacitance and 2000V URdc. It features X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring high voltage and stable performance.
Median Price
$0.574
Lifecycle Status
Suppliers In-Stock
26
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.590
100+ parts
-
1k+ parts
10k+ parts
Farnell
$1.102
$0.810
$0.510
$0.492
Mouser Electronics
$1.160
$0.539
$0.415
$0.383
TTI Europe
$0.197
$0.190
Future Electronics
$0.775
$0.755
DigiKey
$0.359
Arrow
$0.381
$0.320
Verical
$0.407
Newark
$0.558
$0.434
$0.395
Element14
$0.840
$0.556
$0.504
Nova Conductors
$0.439
TME
$0.960
$0.488
$0.374
Component Electronics Inc.
$1.000
$0.750
$0.650
IBS Electronics
$0.533
$0.120
Bristol Electronics
NAC Semi
$1.550
Vyrian
Rutronik
$0.099
$0.097
ComSIT Distribution GmbH
LIBRA Elektronik GmbH
Prism Electronics
Q Components
Sensible Micro Corp
Connect4Technologies Inc.
Semtec, LLC
ACDS - Activité Composants Distribution Service
Semicontronic
$0.076
$0.074
Aztec Data Supply Inc.
$0.090
Advanced Electronics
$0.329
Aranea Global
$0.431
$0.413
Argo Parts USA
$0.426
Corohmni
$0.440
Continental Prestige Electronics
$0.864
$0.614
$0.397
CoreStaff
$1.349
$0.253
$0.210
Eastek
Perfect Parts
GreenTree Electronics
Glotronic Ltd.
Authorized Procurement Solutions
Alle Elektronik GmbH
Assy Fe
Kepictronics
Ceramic dielectric materials offer high stability and reliability, making this capacitor suitable for a wide range of applications.
Rectangular package shape allows for efficient utilization of space on a PCB, enabling a compact design.
Multi-layer construction provides increased capacitance in a smaller footprint, ideal for applications with space constraints.
TR packing method with embossed tape ensures easy handling and automated assembly during manufacturing.
Two terminals ensure a secure connection and stable operation within the circuit.
Wraparound terminal shape provides a strong mechanical connection, reducing the risk of disconnection in demanding environments.
X7R temperature characteristics indicate stable capacitance over a wide temperature range, making the capacitor reliable in varying operating conditions.
With a capacitance of 0.0022 uF, this capacitor can store and release the required amount of electrical energy efficiently.
High rated DC voltage of 2000 V ensures reliable operation in high-voltage applications, increasing the versatility of this capacitor.
Fixed Capacitors GR443QR73D222KW01L attributes and parameters. Explore more Fixed Capacitors devices from Murata Manufacturing
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
GR443QR73D222KW01L Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
1N4148
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
BAV99
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMMBT2222ALT1G
SMMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, 0.6A IC, and 40V VCE. It has a hFE of 75, fT of 300MHz, and operates up to 150°C. Ideal for small signal applications in automotive electronics due to AEC-Q101 compliance.
M/a-com Technology Solutions
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Terminal Position: BOTTOM; Package Style (Meter): CYLINDRICAL;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
2N7002
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
FDC5614P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.6 W; Transistor Application: SWITCHING; Maximum Drain Current (ID): 3 A;
Itt Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Package Body Material: PLASTIC/EPOXY; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Package Shape: RECTANGULAR;
CC0402KRX7R9BB102
Yageo
Yageo CC0402KRX7R9BB102 is a SMT ceramic capacitor with 0.001uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for applications requiring compact size, high reliability, and stable performance in various electronic circuits.
GRM155R61A475MEAAD
Murata Manufacturing
Murata Manufacturing's GRM155R61A475MEAAD is a ceramic capacitor with 4.7uF capacitance and 10V rated DC voltage. It features X5R temperature characteristics, -55 to 85°C operating range, and 20% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
C1608X7R1H104M080AA
TDK
TDK C1608X7R1H104M080AA is a 0603 size ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This surface mount capacitor is commonly used in electronic circuits for filtering, decoupling, and energy storage purposes.
0402ZD105KAT2A
KYOCERA AVX
0402ZD105KAT2A by KYOCERA AVX is a ceramic capacitor with 1uF capacitance, 10V URdc. X5R temperature code, -55 to 85°C operating range. SMT package for surface mount applications in electronics requiring compact design and reliable performance.
CL05A475MQ5NRNC
Samsung Electro-mechanics
Samsung Electro-mechanics' CL05A475MQ5NRNC is a ceramic capacitor with 4.7uF capacitance and 6.3V rated DC voltage. It features X5R temperature characteristics, -55 to 85 °C operating range, and SMT package style. Ideal for applications requiring compact surface mount capacitors with stable performance in various electronic devices.
C0603C103K3RACTU
KEMET Corporation
The KEMET C0603C103K3RACTU is a ceramic capacitor with 0.01uF capacitance and 25V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55°C to 125°C. Ideal for surface mount applications in various electronic circuits due to its compact size and multi-layer design.
CL32B106KBJNNNE
Samsung Electro-mechanics CL32B106KBJNNNE is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it suitable for surface mount applications requiring stable performance in a compact rectangular package.
EEE1HA101UAP
Panasonic
Panasonic EEE1HA101UAP is a 100uF aluminum electrolytic capacitor with 50V rated DC voltage. It features tan delta of 0.18, leakage current of 0.05mA, and ripple current of 200mA. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and operating temperature range from -40°C to 85°C.
BFC242041502
Vishay Intertechnology BFC242041502 is a film capacitor with 0.0015uF capacitance, rated for 630V DC and 160V AC. With polypropylene dielectric material, it operates b/w -55 to 85°C and has ±2% tolerance. Ideal for applications requiring fixed capacitors in bulk packaging with through-hole mounting.
GRM1555C1H101JA01D
GRM1555C1H101JA01D by Murata is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance in a wide temperature range. With SMT package style, it is ideal for compact electronic devices needing high-quality capacitors.
08055C104JAT2A
08055C104JAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±5% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
C0805C222F5GACTU
The KEMET Corporation C0805C222F5GACTU is a ceramic capacitor with 0.0022 uF capacitance and 50V URdc. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance over a wide temperature range. With SMT package style and wraparound terminals, it is ideal for compact surface mount designs in various electronic devices.
CL31B106KAHNNNE
Samsung Electro-mechanics' CL31B106KAHNNNE is a ceramic capacitor with 10uF capacitance and 25V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for surface mount applications requiring stable performance in a compact rectangular package.
M39006/25-0072
Defense Logistics Agency
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
M39006/22-0351
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C0603C102J5GACTU
The KEMET Corporation C0603C102J5GACTU is a ceramic capacitor with 0.001uF capacitance and 50V rated DC voltage. Featuring a temperature coefficient of 30ppm/°C, it operates b/w -55 to 125 °C making it ideal for high precision applications requiring stable performance in varying temperatures. With a compact SMT package style, this fixed capacitor is suitable for surface mount designs in electronic circuits.
EEEFK1H221P
Panasonic EEEFK1H221P is a 220uF Aluminum Electrolytic Capacitor with 50V URdc. It has a Tan Delta of 0.10 and Ripple Current of 502.5mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance and -55°C to 105°C operating temperature range.
06035A101JAT2A
06035A101JAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. With temperature coefficient of 30ppm/°C, it's ideal for applications requiring stable performance in temperatures ranging from -55 to 125 °C. Its SMT package style makes it suitable for surface mounting feature.
12105C475K4Z2A
12105C475K4Z2A by KYOCERA AVX is a ceramic capacitor with 4.7uF capacitance, rated for 50V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications requiring compact, high-performance capacitors with negative tolerance of 10%.
CL05A106MP8NUB8
CL05A106MP8NUB8 by Samsung Electro-mechanics is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. It features X5R temperature characteristics, -55 to 85 °C operating range, and matte tin terminal finish. Ideal for surface mount applications requiring stable performance in a compact rectangular package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
GR442QR73D102KW01L
GR442QR73D102KW01L by Murata is a ceramic capacitor with 0.001uF capacitance and 2000V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring high voltage and stable performance.
GR442QR73D152KW01L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0015 uF; Rated DC Voltage (URdc): 2000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GR443DR73D472KW01L
GR443DR73D472KW01L by Murata Manufacturing is a rectangular package ceramic capacitor with a capacitance of 0.0047 uF and a rated DC voltage of 2000 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
GR442QR73D471KW01L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .00047 uF; Rated DC Voltage (URdc): 2000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GR442QR73D471KW01K
GR443QR73D332KW01K
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0033 uF; Rated DC Voltage (URdc): 2000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GR443QR73D332KW01L
GR442QR73D122KW01K
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0012 uF; Rated DC Voltage (URdc): 2000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GR442QR73D122KW01L
GR442QR73D681KW01K
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .00068 uF; Rated DC Voltage (URdc): 2000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GR442QR73D221KW01L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .00022 uF; Rated DC Voltage (URdc): 2000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GR443QR73D102KW01L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .001 uF; Rated DC Voltage (URdc): 2000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GR443QR73D182KW01L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0018 uF; Rated DC Voltage (URdc): 2000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GR443QR73D272KW01L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0027 uF; Rated DC Voltage (URdc): 2000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GR443QR73D392KW01L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0039 uF; Rated DC Voltage (URdc): 2000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GR443QR73D102KW01K
GR443QR73D182KW01K
GR443QR73D222KW01K
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0022 uF; Rated DC Voltage (URdc): 2000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GR443QR73D272KW01K
GR443QR73D392KW01K
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved