Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's GJM0225C1C5R4CB01L is a ceramic capacitor with capacitance of 0.0000054uF and rated DC voltage of 16V. Featuring C0G temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for SMT applications requiring precise capacitance and high reliability in a compact form factor.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Semicontronic
$0.010
Corohmni
$0.020
Aztec Data Supply Inc.
$0.170
AZTECH Wire
$10.439
Authorized Procurement Solutions
Continental Prestige Electronics
Argo Parts USA
Bastille Electronics
Ceramic is a highly reliable and stable material for capacitors, providing long-lasting performance.
Rectangular packages are commonly used and easy to mount, making installation simple and efficient.
Multi-layer construction allows for higher capacitance in a compact size, saving space on the PCB.
Embossed packaging ensures secure transportation and storage, protecting the capacitors from damage.
Having 2 terminals simplifies the installation process and ensures a proper connection.
Surface mount technology (SMT) offers efficient assembly and is suitable for automated manufacturing processes.
C0G dielectric materials have a high stability over a wide temperature range, ensuring consistent performance.
This capacitor has a precise capacitance value, ideal for applications requiring accuracy and reliability.
With a high rated voltage, this capacitor can be used in a variety of electronic circuits without risk of failure.
Fixed Capacitors GJM0225C1C5R4CB01L attributes and parameters. Explore more Fixed Capacitors devices from Murata Manufacturing
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
GJM0225C1C5R4CB01L Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
1N4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
2N7002,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Time At Peak Reflow Temperature (s): 30; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
BSS123,215
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
SMBJ18CA
Jgd Semiconductors
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
LM358DT
STMicroelectronics
LM358DT by STMicroelectronics is a dual operational amplifier with a max input offset voltage of 9000 uV. It operates at a nominal voltage of 5V and has a min voltage gain of 25000. This amplifier is commonly used in applications requiring high precision and low power consumption.
Panjit International
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Comchip Technology
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
Brightking
Changzhou Starsea Electronics
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
Gulf Semiconductor
Goodwork Semiconductor
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
GRM188R61E106MA73J
Murata Manufacturing
Murata Manufacturing's GRM188R61E106MA73J is a 0603 SMT ceramic capacitor with 10uF capacitance and 25V URdc. It has X5R temperature characteristics, -55 to 85 °C operating range, and ±20% tolerance. Ideal for surface mount applications requiring compact size and high capacitance stability.
EEEFTV151XAP
Panasonic EEEFTV151XAP is a 150uF aluminum electrolytic capacitor with 35V URdc. It has low Tan Delta of 0.12 and high Ripple Current of 390mA, suitable for SMT applications in automotive electronics due to AEC-Q200 compliance.
C0603C104K5RACAUTO7411
KEMET Corporation
KEMET Corporation's C0603C104K5RACAUTO7411 is a ceramic capacitor with capacitance of 0.1uF, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for automotive applications due to AEC-Q200 standard compliance and compact SMT package design.
M39006/22-0360
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 160 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
06035C105KAT2A
KYOCERA AVX
KYOCERA AVX 06035C105KAT2A is a SMT ceramic capacitor with 1uF capacitance, rated for 50V. It has X7R temperature characteristics and -55 to 125 °C operating range. Ideal for applications requiring compact, high-performance capacitors in surface mount technology.
C0603C104K5RAC
KEMET C0603C104K5RAC is a ceramic capacitor with 0.1uF capacitance, 50V URdc, and X7R temperature code. Ideal for SMT applications, it has a compact rectangular package (1.6mm x 0.8mm x 0.8mm) with wraparound terminals and -55°C to 125°C operating range.
M39006/22-0345
Exxelia Group
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C0603C105K4RACAUTO7411
KEMET C0603C105K4RACAUTO7411 is a ceramic capacitor with 1uF capacitance, rated for 16V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for automotive applications due to AEC-Q200 standard compliance and compact SMT package design.
VJ0603Y104KXXAC
Vishay Intertechnology's VJ0603Y104KXXAC is a ceramic capacitor with 0.1uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 150 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
GRM155R60J106ME44D
Murata Manufacturing's GRM155R60J106ME44D is a ceramic capacitor with 10uF capacitance, 6.3V URdc, and X5R temp characteristics. Ideal for SMT applications due to its small size (1x0.5x0.5mm) and wraparound terminals, suitable for various electronic devices requiring stable capacitance in a compact form factor.
M39006/30-0038
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 430 uF; Rated DC Voltage (URdc): 8 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
TAJC476K016RNJ
TAJC476K016RNJ by KYOCERA AVX is a 47uF TANTALUM CAPACITOR with 16V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0075mA, and Ripple Current of 188mA. Ideal for applications requiring high reliability in compact SMT designs with operating temperatures ranging from -55 to 125°C.
C4532X5R1E226M250KA
TDK
TDK's C4532X5R1E226M250KA is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85°C, making it suitable for various surface mount applications requiring stable performance in a compact rectangular package.
T491B106K020AT
KEMET T491B106K020AT is a 10uF, 20V Tantalum Capacitor with low Tan Delta of 0.06 and high Ripple Current of 80mA. Ideal for applications requiring compact SMT capacitors with high reliability in temperatures ranging from -55 to 125°C.
C1210C226K3RACTU
KEMET C1210C226K3RACTU is a 22uF ceramic capacitor with X7R temperature characteristics, 25V rated DC voltage, and 10% negative tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range from -55 to 125°C.
GRM32EC72A106KE05L
Murata Manufacturing's GRM32EC72A106KE05L is a ceramic capacitor with 10uF capacitance and 100V rated DC voltage. It features X7S temperature characteristics, -55 to 125 °C operating range, and 22% temp coef. Ideal for surface mount applications in electronics requiring high reliability and performance.
M39006/250072
Cornell Dubilier Electronics
M39006/250072 by Cornell Dubilier Electronics is a TANTALUM CAPACITOR with 220uF capacitance, 75V URdc, and 702mA ripple current. It is polarized, has a tan delta of 0.37, and operates b/w -55 to 125 °C. Ideal for applications requiring high reliability in military or aerospace sectors.
CL10A106KP8NNNC
Samsung Electro-mechanics
CL10A106KP8NNNC by Samsung Electro-mechanics is a ceramic capacitor with 10uF capacitance and 10% tolerance. It operates b/w -55 to 85 °C, suitable for SMT mounting in various electronic applications. With X5R temperature characteristics, it offers stable performance in compact designs.
Vishay Intertechnology's M39006/22-0360 is a TANTALUM CAPACITOR with 160uF capacitance, 50V URdc, and 513mA ripple current. It is MIL-PRF-39006/22 compliant and suitable for applications requiring high reliability in temperatures ranging from -55°C to 125°C.
C2012X5R1A476M125AC
The TDK C2012X5R1A476M125AC is a 0805 size ceramic capacitor with a capacitance of 47 uF and a rated DC voltage of 10 V. It is suitable for surface mount applications and has a temperature coefficient of 15% (ppm/°C).
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
GJM0335C1ER50WB01D
Murata Manufacturing's GJM0335C1ER50WB01D is a ceramic capacitor with 10% negative tolerance, C0G temperature characteristics, and 30ppm/°C temperature coefficient. It operates b/w -55 to 125 °C, has a capacitance of 0.0000005 uF, and rated at 25 V. Ideal for SMT applications requiring compact size and high reliability in various electronic devices.
GJM0335C1E2R4BB01D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000024 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GJM0335C1ER30WB01D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000003 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GJM0225C1C5R5CB01L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000055 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GJM0225C1C5R0CB01L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .000005 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GJM0225C1C5R3CB01L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000053 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GJM0225C1C5R7DB01L
GJM0225C1C5R7DB01L by Murata Manufacturing is a rectangular package, multi-layer ceramic capacitor with a capacitance of 0.0000057 uF and a rated DC voltage of 16 V. It has a temperature coefficient of 30ppm/°C and can operate in temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications.
GJM0335C1ER30BB01D
GJM0225C1E5R8DB01L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000058 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GJM0225C1C5R4WB01L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000054 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GJM0225C1E5R6CB01L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000056 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GJM0335C1E4R3WB01J
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000043 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GJM0335C1H6R2WB01D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000062 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GJM0225C1C4R4CB01L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000044 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GJM0225C1C5R6DB01L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000056 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GJM0225C1C5R9DB01L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000059 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GJM0225C1E5R0CB01L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .000005 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GJM0335C1E1R6WB01D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000016 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GJM0335C1ER20WB01D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000002 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GJM0225C1C5R4DB01L
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved