Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's GCQ1555C1H1R6WB01D is a ceramic capacitor with 3.13% negative tolerance, C0G temperature characteristics, and 50V rated DC voltage. Ideal for AEC-Q200 applications, it offers 0.0000016uF capacitance, -55 to 125 °C operating range, and compact SMT package design.
Median Price
$0.051
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Chip1Stop
1+ parts
-
100+ parts
$0.043
1k+ parts
$0.041
10k+ parts
$0.040
Arrow
Verical
$0.052
Vyrian
Nova Conductors
Corohmni
$0.261
AZTECH Wire
$16.130
Authorized Procurement Solutions
Netroflash
Ceramic is a common dielectric material known for its high insulation resistance and stable performance, making it a reliable choice for capacitors.
Rectangular packages are easy to handle and mount, providing convenience during assembly and installation.
Multi-layer design allows for increased capacitance in a compact form factor, making it suitable for applications where space is limited.
The packaging method ensures safe transportation and storage of the capacitors, reducing the risk of damage.
Having only 2 terminals simplifies the circuit connection process, making it easier for assembly and maintenance.
Surface mount technology (SMT) package style allows for easy automated assembly onto circuit boards, improving manufacturing efficiency.
Wraparound terminals provide secure solder connections, ensuring reliable electrical contact and durability.
With a low negative tolerance, this capacitor offers consistent performance within a narrow range, enhancing circuit reliability.
C0G temperature characteristics ensure minimal capacitance change over a wide temperature range, making this capacitor suitable for precision applications.
Capable of operating at high temperatures, this capacitor is reliable in demanding environments where heat dissipation is a concern.
The specified capacitance value makes this capacitor suitable for filtering and decoupling applications in electronic circuits.
Compliance with AEC-Q200 automotive qualification standards ensures reliable performance in automotive and industrial applications.
With a high rated DC voltage, this capacitor is capable of handling a wide range of voltage inputs, making it versatile in various circuit designs.
Fixed Capacitors GCQ1555C1H1R6WB01D attributes and parameters. Explore more Fixed Capacitors devices from Murata Manufacturing
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Reference Standard:
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Shape:
Width:
GCQ1555C1H1R6WB01D Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
CRCW04020000Z0ED
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
2N2222A
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Solid State Devices
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
MBRM140T1G
MBRM140T1G by Onsemi is a Schottky rectifier diode with 40V max repetitive peak reverse voltage, 1A max output current, and 0.3V max forward voltage. It is used in applications requiring small outline surface mount diodes for efficient power management.
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
SN65HVD230DR
Texas Instruments
SN65HVD230DR by Texas Instruments is a BICMOS technology interface circuit with 1Mbps data rate, suitable for industrial applications. It operates at 3.3V, has 8 terminals in a small outline package, and can withstand temperatures from -40 to 85°C.
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
1N4148W-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
M39029/58-360
Conesys
CONNECTOR ACCESSORY; MIL Conformity: YES; Mating Contacts: M39029/57-354; Terminal Type: CRIMP; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT;
GCM21BR71H105KA03L
Murata Manufacturing
Murata Manufacturing's GCM21BR71H105KA03L is a ceramic capacitor with 1uF capacitance, X7R temperature characteristics, and 50V rated DC voltage. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and compact SMT package design.
C1608X7R1E104K080AA
TDK
The TDK C1608X7R1E104K080AA is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 25V. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
T491B105K035AT
Cornell Dubilier Electronics
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
M39006/22-0345
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
08055C104KAT4A
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
VJ0805Y104JXAAT
Vishay Intertechnology's VJ0805Y104JXAAT is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 150°C operating range, and ±5% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
M39006/25-0052
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 120 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
F951C476MBAAQ2
Nichicon
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
C0603C104K4RACTU
KEMET Corporation
KEMET Corporation's C0603C104K4RACTU is a ceramic capacitor with 0.1uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact fixed capacitors with reliable performance.
GCM21BR71E225KA73L
Murata Manufacturing's GCM21BR71E225KA73L is a ceramic capacitor with 2.2uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.
CL10C101JB8NNNC
Samsung Electro-mechanics
CL10C101JB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, making it suitable for applications requiring stable performance over a wide temperature range. With its compact SMT package style and surface mounting feature, this capacitor is ideal for use in electronic devices where space is limited.
EEHZA1H101P
Panasonic
Panasonic EEHZA1H101P is a 100uF aluminum electrolytic capacitor with 50V rated DC voltage. It features low ESR of 28mohm, -55 to 105 °C operating temp range, and AEC-Q200 standard compliance. Ideal for SMT applications requiring high ripple current handling up to 300mA.
202R18W102KV4E
Johanson Dielectrics
202R18W102KV4E by Johanson Dielectrics is a ceramic capacitor with 0.001 uF capacitance and 2000 V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications due to its rectangular package shape and surface mounting feature.
EEUFC1E102B
Panasonic EEUFC1E102B is a 1000uF Aluminum Electrolytic Capacitor with 25V URdc. It features 0.16 Tan Delta, 1241.25mA Ripple Current, and -55 to 105°C operating range. Ideal for automotive applications meeting AEC-Q200 standard requirements.
M39006/25-0236
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C0603C104K8RACTU
KEMET Corporation's C0603C104K8RACTU is a ceramic capacitor with 0.1uF capacitance and 10V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact rectangular package with wraparound terminals.
GRM1555C1H101JA01D
GRM1555C1H101JA01D by Murata is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C, suitable for applications requiring stable performance in a wide temperature range. With SMT package style, it is ideal for compact electronic devices needing high-quality capacitors.
VJ0805Y104KXATW1BC
Vishay Intertechnology's VJ0805Y104KXATW1BC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
C1608X7R1H104K080AA
C1608X7R1H104K080AA by TDK is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, ideal for SMT applications requiring compact size and high reliability. Its wraparound terminals and multi-layer design make it suitable for various electronic circuits.
CGA5L1X7R1H106K160AC
TDK's CGA5L1X7R1H106K160AC is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating temperature range, and AEC-Q200 standard compliance. Ideal for automotive applications requiring compact SMT capacitors with high reliability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
GCQ1555C1H3R8BB01D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000038 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GCQ1555C1H3R4BB01D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000034 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GCQ1555C1H6R0BB01D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .000006 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GCQ1555C1H120FB01D
Murata Manufacturing's GCQ1555C1H120FB01D is a ceramic capacitor with 0.000012uF capacitance, rated for 50V URdc. With C0G temp characteristics and 30ppm/°C temp coef, it operates b/w -55 to 125 °C. Ideal for automotive applications meeting AEC-Q200 standard due to its compact size and SMT mounting feature.
GCQ1555C1H1R0WB01D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .000001 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GCQ1555C1H140JB01D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .000014 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GCQ1555C1H200JB01D
Murata Manufacturing's GCQ1555C1H200JB01D is a C0G ceramic capacitor with capacitance of 0.00002uF, rated for 50V URdc. It has a negative tolerance of 5%, operates b/w -55 to 125°C, and features a compact 0402 size suitable for surface mount applications in automotive electronics.
GCQ1555C1H2R5CB01D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000025 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GCQ1555C1H4R7WB01D
Murata Manufacturing's GCQ1555C1H4R7WB01D is a ceramic capacitor with 0.0000047uF capacitance, rated for 50V URdc. It features C0G temperature characteristics, -55 to 125 °C operating range, and compact 0402 size. Ideal for automotive applications meeting AEC-Q200 standard due to its high reliability and small SMT package design.
GCQ1555C1H9R1BB01D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000091 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GCQ1555C1HR30BB01D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000003 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GCQ1555C1HR50WB01D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000005 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GCQ1555C1H8R2BB01D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000082 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GCQ1555C1H100FB01D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .00001 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GCQ1555C1H5R6BB01D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000056 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GCQ1555C1H2R7CB01D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000027 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GCQ1555C1HR80WB01D
GCQ1555C1HR80WB01D by Murata Manufacturing is a ceramic capacitor with a capacitance of 0.0000008 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 30ppm/°C and can operate in temperatures ranging from -55 to 125 °C. This capacitor is commonly used in automotive applications due to its AEC-Q200 reference standard.
GCQ1555C1H3R3WB01D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .0000033 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GCQ1555C1H8R2WB01D
GCQ1555C1H120GB01J
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .000012 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved