Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's GCM21BR71H224KA37L is a ceramic capacitor with capacitance of 0.22uF, rated for 50V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.
Median Price
$0.064
Lifecycle Status
Suppliers In-Stock
32
In-Stock Inventory
1k+
Arrow
1+ parts
$0.097
100+ parts
$0.034
1k+ parts
$0.024
10k+ parts
$0.021
Mouser Electronics
$0.220
$0.080
$0.055
$0.042
DigiKey
$0.079
-
Newark
$0.244
$0.093
$0.066
Avnet
$0.029
TTI Europe
$0.033
TTI
$0.041
Farnell
$0.058
$0.052
Element14
$0.091
$0.061
Chip1Stop
$0.088
$0.062
$0.026
Verical
Future Electronics
RS (Exports)
$0.032
Nova Conductors
Bristol Electronics
$0.175
$0.035
$0.022
TME
$0.086
$0.046
IBS Electronics
$0.044
Vyrian
Sensible Micro Corp
NAC Semi
$0.292
Rutronik
Dan-Mar Components
Cyclops Electronics Ltd
ComSIT Distribution GmbH
Prism Electronics
PC Components Company LLC
Contempo Components LLC
LIBRA Elektronik GmbH
EMSNET
J2 Sourcing AB
Atlantic Semiconductor
Cogito LLC
Semicontronic
$0.025
Argo Parts USA
$0.057
Continental Prestige Electronics
$0.049
$0.039
Advanced Electronics
$0.139
$0.132
Corohmni
$0.320
Aztec Data Supply Inc.
$0.450
Eastek
$0.030
Abacus Technologies
Formix International (Excess)
Perfect Parts
RC Electronics
Infinite Electronics LLP (Excess)
Kepictronics
Alle Elektronik GmbH
Robosynatics
Lucentia Tech
$0.239
Netroflash
$0.065
$0.063
Speed Components Ltd (Excess)
Ceramic capacitors are known for their stability and reliability, making this product a good choice for various applications.
Rectangular packages often provide efficient use of board space and easy placement on circuit boards, making this product convenient for assembly and design.
Multi-layer capacitors offer higher capacitance values in a compact size, making this product suitable for applications with space constraints.
X7R temperature characteristics indicate stable capacitance over a wide temperature range, ensuring reliable performance in varying operating conditions.
With a capacitance of 0.22uF, this capacitor is suitable for filtering and decoupling applications in electronic circuits.
With a rated DC voltage of 50V, this capacitor can handle higher voltage levels, making it suitable for various voltage requirements in electronic circuits.
Fixed Capacitors GCM21BR71H224KA37L attributes and parameters. Explore more Fixed Capacitors devices from Murata Manufacturing
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Reference Standard:
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
Width:
GCM21BR71H224KA37L Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Vishay Intertechnology
Vishay Intertechnology's SS14 is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 1A. Operating at up to 125°C, it has a repetitive peak reverse voltage of 40V. Ideal for surface mount applications, it suits various electronic circuits requiring efficient rectification and low forward voltage drop.
2N2222A
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
LAN8720A-CP-TR
Microchip Technology
LAN8720A-CP-TR by Microchip: Ethernet transceiver with 100 Mbps data rate, operates at 3.3V, and consumes 54mA max supply current. Ideal for network interfaces in commercial applications due to its small size (4x4mm) and low power consumption.
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
Electronic Devices
Frontier Electronics
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
Semitronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
Sensitron Semiconductor
Intersil
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
CC0805KKX5R6BB106
Yageo
Yageo CC0805KKX5R6BB106 is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact rectangular package design.
C5750X5R1H106K230KA
TDK
The TDK C5750X5R1H106K230KA is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85°C. Ideal for surface mount applications in electronics due to its compact size and high reliability.
TAJB106K016RNJ
KYOCERA AVX
TAJB106K016RNJ by KYOCERA AVX is a 10uF Tantalum Capacitor with 16V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0016mA, and ESR of 2800mohm. Ideal for applications requiring compact SMT capacitors with high ripple current capabilities up to 70mA.
12105C104KAT2A
12105C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, 50V rated DC voltage, and X7R temperature characteristics. Ideal for SMT applications due to its compact size (3.3mm x 2.5mm x 1.02mm) and wraparound terminals, offering a temperature coefficient of 15% for use in various electronic devices.
ECA1HHG4R7
Panasonic
ECA1HHG4R7 by Panasonic is a 4.7uF Aluminum Electrolytic Capacitor with 50V URdc, suitable for AEC-Q200 standards. Featuring low Tan Delta of 0.12 and low Leakage Current of 0.003mA, it operates b/w -55°C to 105°C, making it ideal for automotive applications requiring high ripple current handling capabilities.
GRM32ER61C476ME15L
Murata Manufacturing
Murata Manufacturing's GRM32ER61C476ME15L is a ceramic capacitor with 47uF capacitance and 16V rated DC voltage. It features X5R temperature characteristics, -55 to 85°C operating range, and 20% tolerance. Ideal for surface mount applications in electronics requiring compact fixed capacitors.
TMK325ABJ476MM-P
Taiyo Yuden
Taiyo Yuden's TMK325ABJ476MM-P is a ceramic capacitor with 47uF capacitance and 25V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55 to 85°C. Ideal for SMT applications due to its compact rectangular package design and wraparound terminals.
ESG475M400AH2AA
Nissei Electric
ALUMINUM ELECTROLYTIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 400 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: ALUMINUM (WET);
M39006/22-0639
Vishay Intertechnology's M39006/22-0639 is a TANTALUM CAPACITOR with 86uF capacitance, 100V URdc, and 0.1 Tan Delta. Ideal for MIL-PRF-39006/22 applications requiring high ripple current (486mA) and low leakage current (0.009mA). With a tubular package shape, it operates b/w -55 to 125 °C in through-hole mounts.
GRM32ER61E226KE15L
Murata Manufacturing's GRM32ER61E226KE15L is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
C1206F104K5RACTU
KEMET Corporation
C1206F104K5RACTU by KEMET: Ceramic capacitor with 0.1uF capacitance, 50V URdc, X7R temp code. SMT package style for surface mount applications. Operating range -55 to 125 °C, with 10% tolerance.
CL05C330JB5NNNC
Samsung Electro-mechanics
Samsung Electro-mechanics' CL05C330JB5NNNC is a ceramic capacitor with 0.000033 uF capacitance and 50V rated DC voltage. With C0G temperature characteristics, it operates b/w -55 to 125 °C, ideal for surface mount applications requiring high precision and stability. The compact rectangular package with wraparound terminals ensures efficient PCB integration.
CL21C101JBANNNC
Samsung Electro-mechanics' CL21C101JBANNNC is a ceramic capacitor with capacitance of 0.0001uF and rated DC voltage of 50V. With C0G temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for SMT applications requiring high precision and stability in various electronic devices.
M39006/21-0159
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
GRM21BR71A106KE51L
Murata Manufacturing's GRM21BR71A106KE51L is a ceramic capacitor with 10uF capacitance, 10V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in electronics due to its compact size (2x1.25x1.25mm) and high operating temperature range (-55 to 125°C).
CC0603JRNPO9BN101
Yageo's CC0603JRNPO9BN101 is a ceramic capacitor with 0.0001uF capacitance and 50V URdc. It has C0G temperature characteristics, -55 to 125 °C operating range, and ±5% tolerance. Ideal for SMT applications requiring compact size and stable performance in various electronic circuits.
GRM188R60J476ME15D
Murata Manufacturing's GRM188R60J476ME15D is a ceramic capacitor with 47uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55°C to 85°C. Ideal for surface mount applications in electronics due to its compact size and high reliability.
GRM188R61A106ME69D
Murata Manufacturing's GRM188R61A106ME69D is a 0603 SMT ceramic capacitor with 10uF capacitance and 10V URdc. It has X5R temp characteristics, -55 to 85 °C operating range, and 20% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in various electronic devices.
C3216X5R1C476M160AB
TDK's C3216X5R1C476M160AB is a ceramic capacitor with 47uF capacitance and 16V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it ideal for surface mount applications requiring compact size and high capacitance stability.
GRM155R61H104KE19D
GRM155R61H104KE19D by Murata: Ceramic capacitor with 0.1uF capacitance, 50V URdc, X5R temp code. SMT package for surface mount applications in electronics. Size of 1x0.5x0.5mm makes it ideal for compact designs requiring stable performance at -55 to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
GCM21BR71A106KE22L
Murata Manufacturing's GCM21BR71A106KE22L is an 0805 SMT ceramic capacitor with 10uF capacitance, X7R temperature characteristics, and 10% tolerance. It operates b/w -55°C to 125°C, suitable for automotive applications meeting AEC-Q200 standard.
GCM21BR71H105KA03L
Murata Manufacturing's GCM21BR71H105KA03L is a ceramic capacitor with 1uF capacitance, X7R temperature characteristics, and 50V rated DC voltage. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard compliance and compact SMT package design.
GCM21BR71E225KA73L
Murata Manufacturing's GCM21BR71E225KA73L is a ceramic capacitor with 2.2uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.
GCM21BR71C475KA73L
Murata Manufacturing's GCM21BR71C475KA73L is a ceramic capacitor with 4.7uF capacitance, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for automotive applications meeting AEC-Q200 standard.
GCM21BR72A104KA37L
Murata Manufacturing's GCM21BR72A104KA37L is a ceramic capacitor with capacitance of 0.1uF, rated at 100V DC. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.
GCM21BR72A104KA37K
Murata Manufacturing's GCM21BR72A104KA37K is an 0805 SMT ceramic capacitor with 0.1uF capacitance, X7R temperature characteristics, and 100V URdc. It is ideal for automotive applications due to AEC-Q200 compliance and a temperature range of -55 to 125 °C.
GCM21BR70J106KE22L
Murata Manufacturing's GCM21BR70J106KE22L is an 0805 SMT ceramic capacitor with 10uF capacitance, X7R temperature characteristics, and 6.3V rated DC voltage. It is ideal for automotive applications due to AEC-Q200 compliance and a temperature range of -55°C to 125°C.
GCM21BR71E105KA56L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GCM21BR71C225KA64L
Murata Manufacturing's GCM21BR71C225KA64L is a ceramic capacitor with 2.2uF capacitance, rated for 16V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications in automotive electronics due to AEC-Q200 standard compliance.
GCM21BR71A106KE22K
Murata Manufacturing's GCM21BR71A106KE22K is a ceramic capacitor with 10uF capacitance, 10% tolerance, and X7R temperature characteristics. It is used in surface mount applications with a rated DC voltage of 10V.
GCM21BR71H104KA37L
Murata Manufacturing's GCM21BR71H104KA37L is an 0805 SMT ceramic capacitor with a capacitance of 0.1uF, rated at 50V URdc. It has X7R temperature characteristics and is AEC-Q200 compliant, suitable for automotive applications due to its high operating temperature range (-55 to 125°C) and compact size.
GCM21BR71H105KA03K
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GCM21BC71C106KE36L
Murata Manufacturing's GCM21BC71C106KE36L is a ceramic capacitor with 10uF capacitance, X7S temp characteristics, and 16V rated DC voltage. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and compact SMT package design.
GCM21BC72A105KE36L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GCM216R71H103KA37D
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GCM21BR71C475KA73K
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GCM21BR71H474KA55L
Murata Manufacturing's GCM21BR71H474KA55L is a ceramic capacitor with capacitance of 0.47uF, rated for 50V. It has X7R temperature characteristics, suitable for AEC-Q200 standards in automotive applications. With dimensions of 2x1.25x1.25mm and surface mount feature, it offers reliable performance in compact electronic designs.
GCM21BR7YA105KA55L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GCM21BC71E475KE36L
Murata Manufacturing's GCM21BC71E475KE36L is a ceramic capacitor with 4.7uF capacitance, rated for 25V DC voltage. It has X7S temperature characteristics and operates b/w -55 to 125°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
GCM21BR71H224JA37L
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .22 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved