Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's DSS9NC52A271Q55B is a 100V rated data line filter with 7A current capacity. With dimensions of L12xB7.5xH10.5 (mm), it operates b/w -25°C to 85°C, making it suitable for various electronic applications requiring noise suppression in data lines.
Median Price
$0.770
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
< 1k
Component Electronics Inc.
1+ parts
100+ parts
$0.580
1k+ parts
$0.500
10k+ parts
-
ComSIT Distribution GmbH
Nova Conductors
Corohmni
$1.214
Authorized Procurement Solutions
Continental Prestige Electronics
Netroflash
Argo Parts USA
Suitable for use with standard voltage applications, ensuring compatibility with a wide range of devices.
Effectively filters data line noise, providing clean and stable data transmission.
Can operate efficiently at high temperatures, making it suitable for use in various environments.
Capable of functioning in low temperatures, ensuring reliability in cold conditions.
Compact size allows for easy installation in limited spaces.
Small footprint makes it ideal for applications where space is a constraint.
Bulk packaging option for cost-effective purchase of multiple units.
Securely mounts onto circuit boards, ensuring stable connections.
Capable of handling high currents, suitable for devices with higher power requirements.
Low profile design for easy integration into electronic devices.
Provides effective filtering of unwanted signals, ensuring clean data transmission.
Data Line Filters DSS9NC52A271Q55B attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Additional Features:
Capacitance:
Filter Type:
Height:
Length:
Manufacturer Series:
Mounting Type:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Rated Voltage:
Width (mm):
DSS9NC52A271Q55B Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
M24308/2-1F
Souriau-sunbank Connection Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body Length: 1.228 inch; Mounting Type: CABLE AND PANEL; Termination Type: CRIMP;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LM358N
Kec
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148WS
Vishay Intertechnology
Vishay Intertechnology's 1N4148WS is a single rectifier diode with a max forward voltage of 1V and output current of 0.15A. With a fast reverse recovery time of 0.004us, it operates up to 150°C. Ideal for applications requiring high-speed switching and low power consumption in surface mount configurations.
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
1N4148
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
Sangdest Microelectronics (Nanjing)
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
Temic Semiconductors
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
BAV99
Silicon Standard
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
Leshan Radio
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
LL4148
Synsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
LIS2DH12TR
STMicroelectronics
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
Eic Semiconductor
BLM18HG102SN1D
Murata Manufacturing
Murata Manufacturing's BLM18HG102SN1D is a 0603 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. With a max frequency of 1000 MHz and DC resistance of 1.6 ohm, it is ideal for data line filtering applications requiring an output impedance of 1000 OHM.
MI0805J102R-10
Laird Technologies
MI0805J102R-10 by Laird Technologies is a chip bead data line filter with 2 terminals, operating b/w -40 to 125 °C. With dimensions of L2XB1.25XH.9 (mm), it has a max frequency of 1000 MHz and DC resistance of 0.15 ohm. Ideal for surface mount applications in electronic devices requiring noise suppression up to 25 MHz.
BLM18PG330SN1D
Murata Manufacturing's BLM18PG330SN1D is a chip bead data line filter with 2 terminals, rated for 3A current. With dimensions of 1.6x0.8x0.8mm, it operates b/w -55°C to 125°C and offers an output impedance of 33Ω at frequencies ranging from 100MHz. Ideal for surface mount applications in electronic devices requiring noise suppression on data lines.
DLW5AHN402SQ2L
Murata Manufacturing's DLW5AHN402SQ2L is a data line filter with 2 functions, rated at 50V and 0.2A. With dimensions of L5.0xB3.6xH4.3 (mm), it operates b/w -25°C to 85°C, offering max DC resistance of 3 ohm and output impedance of 4000 ohm. Ideal for surface mount applications requiring high insulation resistance up to 10 Mohm.
744232222
Wuerth Elektronik & Kg
Wurth Elektronik 744232222 is a Data Line Filter with 2 functions, rated at 50V. It has 4 terminals and operates b/w -40 to 125°C. With dimensions of L3.2xB1.6xH1.9 (mm), it offers an output impedance of 2200Ω and max DC resistance of 1.2Ω, suitable for surface mount applications in various electronic devices.
BLM15AX100SN1D
BLM15AX100SN1D by Murata is a chip bead data line filter with 2 terminals, rated current of 1.74A, and max operating temp of 125°C. It has a ferrite chip construction, DC resistance of 0.015 ohm, and output impedance of 10 ohm. Ideal for surface mount applications in electronics to suppress noise interference at frequencies ranging from 100 MHz.
MPZ2012S221AT000
TDK
MPZ2012S221AT000 by TDK is a chip bead data line filter with dimensions of 2x1.25x0.85mm, suitable for surface mount applications. It has a max operating temperature of 125°C and offers an output impedance of 220 ohms at a min frequency of 100 MHz. Ideal for noise suppression in electronic circuits requiring high-frequency filtering.
MPZ2012S300AT
The TDK MPZ2012S300AT is an 0805 chip bead filter with 2 terminals. With a max operating temp of 125°C and min of -55°C, it offers low DC resistance of 0.01 ohm and output impedance of 30Ω. Ideal for data line filtering applications due to its compact size (L2.0xB1.25xH0.85 mm) and high rated current of 6A.
MPZ2012S331A
The TDK MPZ2012S331A is an 0805 chip bead data line filter with a max operating temperature of 125°C and min frequency of 100 MHz. With a DC resistance of 0.05 ohm, it offers an output impedance of 330 OHM, making it ideal for surface mount applications in electronic devices requiring noise suppression and signal filtering.
CM1422-03CP
CM1422-03CP by Onsemi is a data line filter with 8 functions and 20 terminals. It has a max operating temperature of 85°C and min of -40°C. With dimensions of L4.0XB1.46XH0.65 (mm), it is ideal for applications requiring high capacitance filtering in compact spaces.
BLM18HE152SN1B
Murata Manufacturing's BLM18HE152SN1B is a chip bead data line filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.5 ohm, output impedance of 1500 OHM, and rated current of 0.5 A. Ideal for surface mount applications in filtering frequencies from 100 MHz to 1000 MHz.
BLM21PG331SN1B
Murata Manufacturing's BLM21PG331SN1B is an 0805 chip bead filter with 2 terminals, operating b/w -55 to 125 °C. It offers a DC resistance of 0.07 ohm, output impedance of 330 OHM, and rated current of 1 A. Ideal for data line filtering applications due to its ferrite construction and surface mounting type.
MI0603L221R-10
Steward
FERRITE CHIP; Maximum DC Resistance: .05 ohm; Rated Current: 2 A; Dimensions: L1.6XB0.8XH0.8 (mm)/L0.063XB0.031XH0.031 (inch); Height: .8 mm; No. of Terminals: 2;
SRF0905-251Y
Bourns
Bourns SRF0905-251Y is a data line filter with 2 functions, rated voltage of 50V, and inductance of 250uH. It operates b/w -40°C to 105°C, has a max DC resistance of 0.13 ohm, and output impedance of 600 ohm. Ideal for applications requiring surface mount filters with dimensions L9.2xB6.0xH5.0mm such as data communication systems.
BLM18BD182SN1D
Murata Manufacturing's BLM18BD182SN1D is a chip bead data line filter with 2 terminals, rated current of 0.05A, and output impedance of 1800 ohm. It operates b/w -55 to 125 °C and has dimensions of L1.6XB0.8XH0.8 (mm). Ideal for surface mount applications in filtering frequencies from 100 MHz with max DC resistance of 1.5 ohm.
SBSPP1000103MXT
Knowles Precision Devices
SBSPP1000103MXT by Knowles Precision Devices is a 100 V rated data line filter with inductance of 0.25 uH, max insertion loss of 60 dB, and max DC resistance of 0.5 ohm. It is ideal for surface mount applications requiring high capacitance filtering in a compact L3.2XB1.6XH1.6 mm package.
4700-008LF
Tusonix
DATA LINE FILTER; Rated Current: 10 A; Maximum Operating Temperature: 85 Cel; Inductance: .1 uH; Capacitance: 4000 uF; Length: 8 mm;
ACM9070-701-2PL-TL01
ACM9070-701-2PL-TL01 by TDK is a FERRITE CHIP data line filter with 2 functions, rated voltage of 80V, and 10 Mohm min insulation resistance. It operates b/w -40 to 85 °C, has 4 terminals, and dimensions of L9.0XB7.0XH4.5 mm. Ideal for applications requiring high impedance filtering in compact spaces.
PLT10HH101150PNL
Murata Manufacturing's PLT10HH101150PNL is a Data Line Filter with 2 functions, rated at 300V and 15A. It offers an inductance of 2uH, operates b/w -55 to 125 °C, and has a max DC resistance of 0.0018 ohm. Ideal for applications requiring noise suppression in data lines.
50105C
C&d Technologies
DATA LINE FILTER; Maximum DC Resistance: .3 ohm; Rated Current: .7 A; No. of Terminals: 4; Mounting Type: SURFACE MOUNT; Width (mm): 5.9;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DSS9NC51H223Q55B
DATA LINE FILTER; Rated Current: 7 A; Rated Voltage: 50 V; Maximum Operating Temperature: 85 Cel; Packing Method: BULK; Length: 12 mm;
DSS9NC52A222Q55B
DATA LINE FILTER; Rated Current: 7 A; Length: 12 mm; Height: 10.5 mm; Packing Method: BULK; Dimensions: L12XB7.5XH10.5 (mm);
DSS9HB32E222Q55B
DATA LINE FILTER; Rated Current: 6 A; Capacitance: 2200 uF; Width (mm): 7.5; Minimum Operating Temperature: -40 Cel; Rated Voltage: 250 V;
DSS9NC52A222Q93A
DATA LINE FILTER; Rated Current: 7 A; No. of Terminals: 3; Rated Voltage: 100 V; Minimum Operating Temperature: -25 Cel; Packing Method: AMMO PACK;
DSS9NC52A220Q55B
DATA LINE FILTER; Rated Current: 7 A; Minimum Operating Temperature: -25 Cel; Maximum Operating Temperature: 85 Cel; Dimensions: L12XB7.5XH10.5 (mm); Mounting Type: THROUGH HOLE MOUNT;
DSS9NC52A222Q55J
DATA LINE FILTER; Rated Current: 6 A; Maximum Operating Temperature: 85 Cel; Manufacturer Series: DSS9; Width (mm): 7.5; Packing Method: TAPE AND REEL;
DSS9NC52A271Q55J
DATA LINE FILTER; Rated Current: 6 A; Capacitance: 270 uF; Height: 10.5 mm; Length: 12 mm; Manufacturer Series: DSS9;
DSS9NC52A220Q55A
DATA LINE FILTER; Rated Current: 7 A; Additional Features: BUILT-IN FERRITE BEAD; STRAIGHT LEAD TYPE; Capacitance: 22 uF; Rated Voltage: 100 V; Length: 12 mm;
DSS9NC52A271Q55A
DATA LINE FILTER; Rated Current: 7 A; Rated Voltage: 100 V; Width (mm): 7.5; Packing Method: AMMO PACK; Height: 10.5 mm;
DSS9NC52A271Q91J
DATA LINE FILTER; Rated Current: 6 A; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -25 Cel; Packing Method: TAPE AND REEL; Rated Voltage: 100 V;
DSS9NC52A220Q54B
DATA LINE FILTER; Rated Current: 7 A; Mounting Type: THROUGH HOLE MOUNT; Capacitance: 22 uF; Rated Voltage: 100 V; Maximum Operating Temperature: 85 Cel;
DSS9NC52A222Q54B
DATA LINE FILTER; Rated Current: 7 A; Additional Features: BUILT-IN FERRITE BEAD TYPE; STRAIGHT LEAD TYPE; No. of Functions: 1; Minimum Operating Temperature: -25 Cel; Capacitance: 2200 uF;
DSS9NC52A222Q56B
DATA LINE FILTER; Rated Current: 7 A; Packing Method: BULK; No. of Functions: 1; Manufacturer Series: DSS9; Minimum Operating Temperature: -25 Cel;
DSS9NC52A271Q54B
DATA LINE FILTER; Rated Current: 7 A; Packing Method: BULK; Rated Voltage: 100 V; No. of Functions: 1; Maximum Operating Temperature: 85 Cel;
DSS9NC52A271Q56B
DATA LINE FILTER; Rated Current: 7 A; Manufacturer Series: DSS9; Packing Method: BULK; No. of Functions: 1; Maximum Operating Temperature: 85 Cel;
DSS9NC52A271Q92J
DATA LINE FILTER; Rated Current: 6 A; No. of Functions: 1; Additional Features: BUILT-IN FERRITE BEAD TYPE; STRAIGHT LEAD TYPE; Minimum Operating Temperature: -25 Cel; Packing Method: TAPE AND REEL;
DSS9NC52A271Q93J
DATA LINE FILTER; Rated Current: 6 A; No. of Functions: 1; Manufacturer Series: DSS9; Packing Method: TAPE AND REEL; Rated Voltage: 100 V;
DSS9NC52A220
DATA LINE FILTER; Rated Current: 7 A; Minimum Operating Temperature: -25 Cel; No. of Functions: 1; Manufacturer Series: DSS9; Length: 12 mm;
DSS9NC52A222
DATA LINE FILTER; Rated Current: 7 A; Packing Method: TAPE AND REEL; Height: 10.5 mm; Width (mm): 7.5; Manufacturer Series: DSS9;
DSS9NC52A271
DATA LINE FILTER; Rated Current: 7 A; No. of Functions: 1; Minimum Operating Temperature: -25 Cel; Dimensions: L12.0XB7.5XH10.5 (mm)/L0.472XB0.295XH0.413 (inch); Packing Method: TAPE AND REEL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved