Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
CERAMIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .0039 uF; Rated DC Voltage (URdc): 2000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Authorized Procurement Solutions
1+ parts
100+ parts
1k+ parts
10k+ parts
Fixed Capacitors DEHR33D392KB4B attributes and parameters. Explore more Fixed Capacitors devices from Murata Manufacturing
Capacitance:
Capacitor Type:
Diameter:
Dielectric Material:
Height:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Pitch:
Terminal Shape:
Width:
DEHR33D392KB4B Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
DRV5053VAQLPG
Texas Instruments
Texas Instruments DRV5053VAQLPG is a magnetic field sensor with 2.5-38V supply voltage range, -40 to 125°C operating temperature, and 0-2V output. Ideal for applications requiring Hall effect sensors like automotive, industrial automation, and robotics due to its compact size (1.52" x 4mm) and high output current capability of 2.3A.
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
LM2931AZ-5.0RPG
Onsemi
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
1N4148WS
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
IRLML6402TRPBF
International Rectifier
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.3 W; Peak Reflow Temperature (C): 260; Package Style (Meter): SMALL OUTLINE;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
TAJC476K016RNJ
KYOCERA AVX
TAJC476K016RNJ by KYOCERA AVX is a 47uF TANTALUM CAPACITOR with 16V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0075mA, and Ripple Current of 188mA. Ideal for applications requiring high reliability in compact SMT designs with operating temperatures ranging from -55 to 125°C.
GRM155R61A105KE15D
Murata Manufacturing
Murata Manufacturing's GRM155R61A105KE15D is a ceramic capacitor with 1uF capacitance and 10V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
CC0603KRX7R9BB222
Yageo
Yageo CC0603KRX7R9BB222 is a ceramic capacitor with 0.0022uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications in electronics requiring compact size and stable performance.
ECA2EHG4R7
Panasonic ECA2EHG4R7 is a 4.7uF Aluminum Electrolytic Capacitor with 250V URdc, suitable for through-hole mounting. It features a tan delta of 0.15 and leakage current of 0.0805mA, ideal for applications requiring high ripple current handling up to 50mA. With a cylindrical package style and radial terminals, it operates b/w -25°C to 105°C efficiently.
F951C476MBAAQ2
Nichicon
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
GRT21BR61E226ME13L
GRT21BR61E226ME13L by Murata Manufacturing is a ceramic capacitor with a capacitance of 22 uF and a rated DC voltage of 25 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 85 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
M39006/22-0345
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
M39006/30-0038
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 430 uF; Rated DC Voltage (URdc): 8 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
06035A102JAT2A
06035A102JAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.001uF and rated DC voltage of 50V. With temperature coefficient of 30ppm/°C, it's ideal for applications requiring high precision and stability in a compact SMT package. Operating b/w -55 to 125 °C, it suits various electronic devices needing reliable performance.
CL10A105KO8NNNC
Samsung Electro-mechanics
CL10A105KO8NNNC by Samsung Electro-mechanics is a ceramic capacitor with 1uF capacitance and 16V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it suitable for various applications requiring stable performance in a compact SMT package.
C1005X7R1C104K050BC
TDK
The TDK C1005X7R1C104K050BC is a ceramic capacitor with 0.1uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for SMT applications due to its compact size (1x0.5x0.5mm) and wraparound terminals for easy mounting in electronic devices.
CL10A226MO7JZNC
Samsung Electro-mechanics CL10A226MO7JZNC is a ceramic capacitor with 22uF capacitance and 16V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and SMT package style. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
C0603C104K5RAC7411
KEMET Corporation
KEMET C0603C104K5RAC7411 is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications due to its small size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
C0805C102J5GACTU
The KEMET Corporation C0805C102J5GACTU is a ceramic capacitor with capacitance of 0.001 uF and rated DC voltage of 50V. With a temperature coefficient of 30ppm/°C, it operates b/w -55 to 125 °C making it ideal for applications requiring stable performance in varying temperatures. Its SMT package style and compact dimensions make it suitable for surface mount designs in various electronic devices.
GRM32DR71E106KA12L
Murata Manufacturing's GRM32DR71E106KA12L is a ceramic capacitor with 10uF capacitance, rated for 25V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications in various electronic devices due to its compact size and high reliability.
M39006/220565
Cornell Dubilier Electronics
M39006/220565 by Cornell Dubilier Electronics is a TANTALUM CAPACITOR with 10uF capacitance, 50V URdc, and 0.04 Tan Delta. It has a leakage current of 0.001mA and operates b/w -55 to 125 °C. Ideal for applications requiring high ripple current handling in through-hole mounting setups.
CGA6P3X8R1E475K250AB
TDK's CGA6P3X8R1E475K250AB is a ceramic capacitor with 4.7uF capacitance and 25V rated DC voltage. It features X8R temperature characteristics, -55 to 150 °C operating range, and AEC-Q200 standard compliance. Ideal for surface mount applications in automotive electronics due to its compact size and high reliability.
C0805C104K5RAC7210
KEMET C0805C104K5RAC7210 is a ceramic capacitor with 10% tolerance, X7R temperature characteristics, and 0.1uF capacitance. Ideal for surface mount applications in electronics due to its compact size (2x1.25x.78mm) and 50V rated DC voltage.
M39006/25-0072
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
06035C102JAT2A
06035C102JAT2A by KYOCERA AVX is a SMT ceramic capacitor with capacitance of 0.001uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125 °C operating range, and 5% tolerance. Ideal for applications requiring compact size, high reliability, and stable performance in various electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved