Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's BL02RN1R2P1A is a Ferrite Bead Data Line Filter with 6A rated current, operating from -40°C to 85°C. It features Tin/Copper terminal finish, dimensions of L7.5xB3.4xH7.5mm, and Through Hole Mounting. Ideal for noise suppression in electronic circuits requiring efficient filtering and protection against electromagnetic interference (EMI).
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
ComSIT Distribution GmbH
Nova Conductors
VNN
AZTECH Wire
$11.468
Metaverse IC Inc.
Argo Parts USA
Continental Prestige Electronics
Authorized Procurement Solutions
Futuretech Components
Bastille Electronics
Ferrite bead filters are effective in reducing electromagnetic interference, making this product a reliable choice for improving signal quality.
With a high maximum operating temperature of 85°C, this filter can withstand demanding environmental conditions.
The ability to operate at temperatures as low as -40°C ensures reliable performance even in extreme cold environments.
The tin/copper terminal finish provides excellent conductivity and corrosion resistance, contributing to the overall durability of the product.
The compact width of 3.4mm allows for easy integration into various electronic devices without taking up much space.
The short length of 7.5mm further enhances the versatility of this filter, making it suitable for installations where space is limited.
The ammo pack packaging method ensures convenient storage and handling, making it easy for manufacturers to use this filter in mass production.
The through-hole mounting type offers secure and reliable installation, ensuring the filter stays in place during operation.
The compact dimensions of this filter make it versatile and adaptable to a wide range of electronic devices and applications.
With a rated current of 6A, this filter is capable of handling high levels of electrical current, suitable for demanding applications.
The height of 7.5mm strikes a balance between compact size and efficient performance, making this filter ideal for space-constrained installations.
Data Line Filters BL02RN1R2P1A attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Additional Features:
Filter Type:
Height:
JESD-609 Code:
Length:
Mounting Type:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Terminal Finish:
Width (mm):
BL02RN1R2P1A Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
PCN Obsolescence/ EOL - Multiple Series 01/Apr/2020
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
1N4148
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
BAV99
Infineon Technologies
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW06030000Z0EAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
LM358D-T
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
SMBJ18CA
Littelfuse
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Grande Electronics
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
LM555CN
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Bytesonic Electronics
2N7002
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Time At Peak Reflow Temperature (s): 30; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
MBRA160T3G
MBRA160T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.51V. It operates b/w -55 to 150°C, has a reverse test voltage of 60V, and is ideal for power applications due to its high efficiency and small outline package style.
FBMJ3216HM600-T
Taiyo Yuden
Taiyo Yuden's FBMJ3216HM600-T is a chip bead data line filter with 2 terminals, rated for 4A current. Featuring ferrite chip construction, it offers 60 ohm output impedance and operates b/w -40 to 85°C. Ideal for surface mount applications in filtering frequencies up to 100 MHz.
BLM31PG601SN1B
Murata Manufacturing
Murata Manufacturing's BLM31PG601SN1B is a chip bead data line filter with 2 terminals, rated for 1.5A current and 600 ohm output impedance. It operates b/w -55°C to 125°C, suitable for applications requiring noise suppression in the frequency range of 100 MHz.
BLM21PG331BH1D
Murata Manufacturing's BLM21PG331BH1D is a FERRITE CHIP filter with 2 terminals, AEC-Q200 compliant. It offers 330 OHM output impedance, 0.07 ohm DC resistance, and 0.01 A rated current. Ideal for data line filtering applications with a temperature range of -55 to 150 °C.
HI1812V101R-10
Laird Technologies
HI1812V101R-10 by Laird Technologies is a chip bead data line filter with 2 terminals. It operates b/w -40 to 125 °C and has a DC resistance of 0.007 ohm. With dimensions of L4.5XB3.2XH1.4 (mm), it's ideal for applications requiring filtering in the frequency range of 25-1000 MHz at an output impedance of 125 OHM.
7448225007
Wuerth Elektronik & Kg
7448225007 by Wurth Elektronik is a data line filter with a rated voltage of 250V and a max operating temperature of 125°C. It has 2 functions, 4 terminals, and an inductance of 700uH. This panel mount filter is UL approved and commonly used for filtering data lines in electronic applications.
BNX022-01L
BNX022-01L by Murata Manufacturing is a data line filter with a rated voltage of 50V and attenuation of 35dB at max frequency. It has a compact size of L12.1XB9.1XH3.1 (mm) and is suitable for surface mount applications in various electronic devices.
SRF0905-471Y
Bourns
Bourns SRF0905-471Y is a Data Line Filter with 2 functions, rated at 50V. Featuring an inductance of 470uH and max DC resistance of 0.14 ohm, it operates b/w -40°C to 105°C. Ideal for applications requiring a surface mount filter with dimensions L9.2xB6.0xH5.0mm, such as data transmission systems or electronic devices needing noise suppression.
74279207
Wurth Elektronik 74279207 is a multi-layer data line filter with FERRITE CHIP construction. It has 2 terminals, operates b/w -55 to 125 °C, and offers a max frequency of 400 MHz. Ideal for surface mount applications in electronics to suppress noise and interference on data lines up to 100 OHM impedance.
AWCU00453228201XTE
Yageo
Yageo AWCU00453228201XTE is a Data Line Filter with 2 functions, AEC-Q200 screening. Features 10 Mohm Min Insulation Resistance, 50V Rated Voltage, and -40 to 125 °C Operating Temp. Ideal for automotive applications requiring noise suppression in data lines.
4400-076LF
Cts
4400-076LF by Cts is a data line filter with a rated voltage of 200V and a max insertion loss of 28dB. It is a panel mount filter with a capacitance of 100uF, suitable for applications requiring noise suppression in data lines.
MMZ1608R102ATA00
TDK
TDK MMZ1608R102ATA00 is a 0603 chip bead filter with 2 terminals. It offers max operating temp of 125°C and min of -55°C, with width of 0.8mm and length of 1.6mm. Ideal for data line filtering applications due to its ferrite construction, output impedance of 1000Ω, and rated current of 0.4A.
BLM21PG331SN1J
BLM21PG331SN1J by Murata Manufacturing is a chip bead data line filter with 2 terminals and an 0805 case code. It has a max operating temperature of 125°C and a min operating temperature of -55°C. This ferrite chip filter has dimensions of L2.0XB1.25XH0.85 (mm) and is commonly used for surface mount applications to provide impedance of 330 OHM at a rated current of 1 A.
MMZ2012R102AT000
TDK's MMZ2012R102AT000 is an 0805 chip bead filter with 2 terminals, ideal for data line applications. With a max operating temperature of 125°C and min of -55°C, it offers low DC resistance of 0.3 ohm and output impedance of 1000 ohm. This surface mount ferrite chip measures L2.0xB1.25xH0.85 mm and can handle a rated current of 0.5 A.
NFM21CC471R1H3D
Murata Manufacturing's NFM21CC471R1H3D is a data line filter with 470uF capacitance, 50V rated voltage, and 1A rated current. It features a feed through capacitor design for high insulation resistance applications. Ideal for surface mount installations in various electronic devices operating b/w -55°C to 125°C.
DLP11TB800UL2L
Murata Manufacturing's DLP11TB800UL2L is a Data Line Filter with 2 functions, rated at 5V. It offers a max operating temperature of 85°C and min insulation resistance of 100 Mohm. Ideal for applications requiring filtering in data lines with dimensions of L1.25xB1.0xH0.3mm.
MMZ1005S601CT000
The TDK MMZ1005S601CT000 is a chip bead data line filter with 2 terminals, ideal for surface mount applications. With dimensions of 1x0.5x0.5mm and a max operating temperature of 125°C, it offers low DC resistance of 0.6 ohm and output impedance of 600 ohm. This ferrite chip filter is suitable for use in electronic devices requiring noise suppression on data lines.
CM1422-03CP
CM1422-03CP by Onsemi is a data line filter with 8 functions and 20 terminals. It has a max operating temperature of 85°C and min of -40°C. With dimensions of L4.0XB1.46XH0.65 (mm), it is ideal for applications requiring high capacitance filtering in compact spaces.
744222
Wurth Elektronik 744222 is a UL-approved data line filter with 2 functions, rated at 80V. With inductance of 1000uH and max DC resistance of 0.31 ohm, it operates b/w -40 to 125 °C. Ideal for applications requiring a surface mount filter with dimensions L9.2XB6.0XH5.0mm, such as electronic devices needing noise suppression on data lines.
TLC/0.1A-101M-00
Fastron Electronics
The Fastron Electronics TLC/0.1A-101M-00 is a Data Line Filter with 100uH inductance, 0.94 ohm max DC resistance, and 0.1A rated current. It operates b/w -55°C to 115°C and has AEC-Q200 & MIL-STD-202G approvals. Ideal for applications requiring noise suppression in data transmission lines.
BLM18KG221SH1D
Murata Manufacturing's BLM18KG221SH1D is a FERRITE CHIP filter with 220 OHM output impedance, 1.5A rated current, and -55 to 125 °C operating temperature range. It is ideal for data line filtering applications due to its AEC-Q200 screening level and surface mounting type.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BL02RN2R1M2B
Murata Manufacturing's BL02RN2R1M2B is a Ferrite Bead Data Line Filter with 7A rated current, -40 to 85°C operating temp range, and Through Hole Mount. Ideal for noise suppression in electronic circuits.
BL02RN1R2M2B
Murata's BL02RN1R2M2B is a ferrite bead data line filter with max temp of 85°C and -40°C min. It has 7A rated current, dimensions of L7.5xB3.4xH7.5mm, and Tin/Silver/Copper terminal finish. Ideal for through-hole mounting applications in various electronic devices requiring noise suppression.
BL02RN2R1N1A
FERRITE BEAD; Rated Current: 6 A; Length: 9 mm; Packing Method: AMMO PACK; Dimensions: L9.0XB3.4XH7.5 (mm)/L0.354XB0.134XH0.295 (inch); Maximum Operating Temperature: 85 Cel;
BL02RN2R1P1A
FERRITE BEAD; Rated Current: 6 A; Packing Method: AMMO PACK; Mounting Type: THROUGH HOLE MOUNT; JESD-609 Code: e2; Maximum Operating Temperature: 85 Cel;
BL02RN1R3J2B
FERRITE BEAD; Rated Current: 7 A; JESD-609 Code: e2; Width (mm): 3.4; No. of Functions: 1; Terminal Finish: Tin/Copper (Sn/Cu);
BL02RN2R3J2B
FERRITE BEAD; Rated Current: 7 A; Dimensions: L9.0XB3.4XH12.0 (mm)/L0.354XB0.134XH0.472 (inch); No. of Functions: 1; Additional Features: RADIAL CRIMP LEAD TYPE; Width (mm): 3.4;
BL02RN1-R62T4
FERRITE BEAD; Rated Current: 6 A; Mounting Type: THROUGH HOLE MOUNT; No. of Functions: 1; Additional Features: RADIAL STRAIGHT AND WAVE FORMED LEAD TYPE; Minimum Operating Temperature: -40 Cel;
BL02RN2R3N1A
FERRITE BEAD; Rated Current: 6 A; No. of Functions: 1; JESD-609 Code: e1; Width (mm): 3.4; Height: 12 mm;
BL02RN2R1Q1A
FERRITE BEAD; Rated Current: 6 A; Maximum Operating Temperature: 85 Cel; Width (mm): 3.4; Length: 9 mm; Additional Features: RADIAL STRAIGHT LEAD TYPE;
BL02RN2-R62T4
FERRITE BEAD; Rated Current: 6 A; Minimum Operating Temperature: -40 Cel; Length: 9 mm; Dimensions: L9.0XB3.4XH7.5 (mm)/L0.354XB0.134XH0.295 (inch); Additional Features: RADIAL STRAIGHT LEAD TYPE;
BL02RN1R2N1A
FERRITE BEAD; Rated Current: 6 A; Maximum Operating Temperature: 85 Cel; Width (mm): 3.4; Terminal Finish: Tin/Copper (Sn/Cu); Dimensions: L7.5XB3.4XH7.5 (mm)/L0.295XB0.134XH0.295 (inch);
BL02RN1R2Q1A
FERRITE BEAD; Rated Current: 6 A; Packing Method: AMMO PACK; Minimum Operating Temperature: -40 Cel; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved