Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's BL01RN1-A62T5 is a FERRITE BEAD data line filter with 6A rated current, -40 to 85°C operating range, and D3.6xH5.0mm dimensions. It is ideal for through-hole mounting applications in electronic devices requiring noise suppression and signal filtering capabilities.
Median Price
-
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
Lantek
1+ parts
100+ parts
1k+ parts
10k+ parts
R&J Components
VNN
Resion
ACDS - Activité Composants Distribution Service
Zilex Electronics Inc.
ECAB
Vyrian
Nova Conductors
Corohmni
$1.773
Semicontronic
$2.400
$2.340
$2.328
Aztec Data Supply Inc.
$3.110
AZTECH Wire
$7.703
GreenTree Electronics
Continental Prestige Electronics
Cyclops Electronics Ltd (Excess)
Glotronic Ltd.
Bastille Electronics
Argo Parts USA
Ferrite beads are effective at filtering out high-frequency noise, making this product ideal for applications where electromagnetic interference needs to be minimized.
With a high maximum operating temperature, this filter can be used in a wide range of environments without risk of overheating.
The low minimum operating temperature allows for reliable performance even in cold climates or environments.
The terminal finish of tin, silver, and copper ensures good conductivity and corrosion resistance for improved durability.
The small diameter makes this filter suitable for applications where space is limited.
The reel packing method allows for easy handling and storage of multiple filters, making it convenient for assembly line production.
The through hole mounting type provides a secure and stable connection, ensuring reliable performance in various applications.
The compact dimensions make this filter suitable for use in tight spaces or with small electronic devices.
With a high rated current of 6 A, this filter can effectively handle power surges and fluctuations without compromising performance.
The low height of 5 mm ensures that this filter can be easily integrated into systems with limited vertical space.
Data Line Filters BL01RN1-A62T5 attributes and parameters. Explore more Data Line Filters devices from Murata Manufacturing
Additional Features:
Diameter (mm):
Filter Type:
Height:
JESD-609 Code:
Manufacturer Series:
Mounting Type:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Rated Current:
Terminal Finish:
BL01RN1-A62T5 Filters trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8504.50.80.00
SB
8504.50.00.00
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2675M-ADJ/NOPB
National Semiconductor
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
MBR0520LT3G
Onsemi
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
Bytesonic Electronics
LM7805CT
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Operating Temperature (TJ-Min): 0 Cel; Technology: BIPOLAR;
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
Formosa Microsemi
LM7805CT/NOPB
Texas Instruments
LM7805CT/NOPB by Texas Instruments is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates b/w 0-125°C, has a package style of flange mount, and offers low line/load regulation making it ideal for various electronic applications requiring stable power supply.
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
2508056017Y0
Fair-rite Products
Fair-rite Products' 2508056017Y0 is a chip bead data line filter with 2 terminals, ideal for surface mount applications. Featuring ferrite chip construction, it offers a frequency range of 100-1000 MHz and an output impedance of 600 ohm. With dimensions of L2.0xB1.25xH0.9 mm, it operates b/w -55 to 125 °C for noise suppression in electronic circuits.
ACM2012-900-2P-T002
TDK
TDK's ACM2012-900-2P-T002 is a FERRITE CHIP filter with 2 functions, rated at 50V and 0.4A. With dimensions of L2.0XB1.2XH1.3 (mm), it offers high insulation resistance for data line filtering applications in electronics.
DLW32MH101XT2L
DLW32MH101XT2L by Murata Manufacturing is a data line filter with 2 functions. It has a min insulation resistance of 10 Mohm and can operate at temperatures ranging from -40 to 125 °C. This filter is commonly used in automotive applications due to its AEC-Q200 screening level.
74270055
Wuerth Elektronik & Kg
Wurth Elektronik 74270055 is a FERRITE BEAD Data Line Filter with 225 OHM Output Impedance. Operating temperatures range from -25 to 125 °C, suitable for noise suppression in electronic circuits. Featuring a diameter of 18.6mm and stud mount design, it's ideal for applications requiring effective filtering and impedance matching.
RB8532-16-1M3
Schaffner Holding Ag
RB8532-16-1M3 by Schaffner Holding Ag is a Data Line Filter with 3 functions, rated voltage of 1000V, and inductance of 1300uH. It operates b/w -40 to 125 °C and has a max DC resistance of 0.0057 ohm. Ideal for applications requiring noise suppression in data lines.
MPZ1608B471ATD25
MPZ1608B471ATD25 by TDK is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 (mm), it's ideal for applications requiring a 470 OHM output impedance in surface mount configurations up to 1A rated current.
MPZ1608R391ATA00
TDK's MPZ1608R391ATA00 is a 0603 chip bead filter with 2 terminals. It offers a max operating temperature of 125°C and min frequency of 100 MHz. Ideal for data line filtering applications, it has an output impedance of 390 ohms and can handle a rated current of 1.2A.
744824101
Wurth Elektronik 744824101 is a UL-approved data line filter with 2 functions, rated at 250V and 10A. With inductance of 1000uH, it operates b/w -40 to 125 °C, ideal for applications requiring noise suppression in data transmission systems.
FLT007A0Z
Ge Industrial Solutions
DATA LINE FILTER MODULE; Maximum DC Resistance: .025 ohm; Rated Current: 7 A; Height: 12.19 mm; Approvals (V): UL; CSA; VDE; EN; Dimensions: L25.4XB25.4XH12.19 (mm)/L1.0XB1.0XH0.48 (inch);
NFM31PC276B0J3L
Murata Manufacturing's NFM31PC276B0J3L is a 6.3V feed-through capacitor with 27,000,000uF capacitance and 6A rated current. It operates b/w -40°C to 85°C, ideal for data line filtering applications requiring high insulation resistance of 20 Mohm. This surface mount filter has three terminals and comes in tape and reel packaging.
MPZ1608S331ATA00
The TDK MPZ1608S331ATA00 is a 0603 chip bead data line filter with 2 terminals. Featuring a ferrite chip construction, it has a max operating temperature of 125°C and DC resistance of 0.08 ohm. Ideal for applications requiring noise suppression in circuits up to 100 MHz frequency range.
742792645
Wurth Elektronik 742792645 is a FERRITE CHIP Data Line Filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L1.6xB0.8xH0.8 (mm), it's ideal for surface mount applications in electronics to achieve an output impedance of 470 OHM at a rated current of 1 A.
SRF2012-900YA
Bourns
Bourns SRF2012-900YA is a Data Line Filter with 2 functions, rated at 50V and 0.4A. It offers high insulation resistance of 10 Mohm, operates b/w -40 to 125 °C, and has a compact size of L2.0xB1.2XH1.2 (mm). Ideal for applications requiring effective filtering in limited space like consumer electronics and communication devices.
NFM18CC102R1C3D
Murata Manufacturing's NFM18CC102R1C3D is a data line filter with 1000uF capacitance, 16V rated voltage, and 0.6A rated current. It features FEED THROUGH CAPACITOR type for noise suppression in electronic circuits. Ideal for applications requiring high insulation resistance and operating temperatures from -55 to 125°C.
VFS6VD81E221T51B
Murata Manufacturing's VFS6VD81E221T51B is a 25V data line filter with 0.5 Mohm insulation resistance. It operates b/w -40 to 105 °C and has a capacitance of 220 uF. Ideal for applications requiring through hole mounting, rated current of 6A, and compact dimensions of L8.0xB2.54xH10.5 mm.
DLW21HN181SQ2L
Murata Manufacturing's DLW21HN181SQ2L is a data line filter with 2 functions, rated at 50V and 0.25A. It offers a max DC resistance of 0.5 ohm and an output impedance of 180 ohm, suitable for applications requiring noise suppression in data lines. With dimensions of L2.0xB1.2xH0.9 (mm), it is designed for surface mount installation in electronic devices operating b/w -40°C to 85°C.
MPZ1005S121CT
The TDK MPZ1005S121CT is a chip bead data line filter with 2 terminals, rated for 1.2A current and 120 ohm output impedance. It operates b/w -40°C to 85°C, suitable for applications requiring noise suppression in circuits up to 100MHz frequency range. Dimensions: L1.0xB0.5xH0.5 (mm).
ILHB0805ER121V
Vishay Dale
FERRITE CHIP; Maximum DC Resistance: .03 ohm; Rated Current: 5 A; Additional Features: NICKEL BARRIER PLATING VIRTUALLY ELIMINATES SILVER MIGRATION; Output Impedance (ohm): 120 OHM; No. of Functions: 1;
LFBK2125HS470-T
Taiyo Yuden
LFBK2125HS470-T by Taiyo Yuden is a FERRITE CHIP data line filter with 2 terminals. It has a max operating temperature of 125°C and min of -55°C. With dimensions of L2.0XB1.25XH0.85 (mm), it is ideal for surface mount applications requiring an output impedance of 47 OHM and rated current of 1 A.
MPZ1608B471AT
The TDK MPZ1608B471AT is a 0603 chip bead data line filter with 2 terminals. It operates b/w -55°C to 125°C, has a DC resistance of 0.15 ohm, and an output impedance of 470 ohm. Ideal for surface mount applications in electronic devices requiring noise suppression at frequencies up to 100 MHz.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
BL01RN1A1D2B
Murata BL01RN1A1D2B is a Ferrite Bead Data Line Filter with 7A rated current, -40 to 85°C operating temp range. Through-hole mount, D3.6xH5.0mm dimensions make it ideal for noise suppression in electronic circuits.
BL01RN1A1F1J
Murata Manufacturing's BL01RN1A1F1J is a data line filter with a ferrite bead filter type. It has a max operating temperature of 85°C and a min operating temperature of -40°C. This through-hole mount filter has dimensions of D3.6XH5.0 (mm) and is suitable for applications requiring a rated current of 6 A.
BL01RN1A2A2B
FERRITE BEAD; Rated Current: 7 A; Packing Method: BULK; Terminal Finish: Tin (Sn) over Copper (Cu); Additional Features: AXIAL CRIMP LEAD TYPE; Minimum Operating Temperature: -40 Cel;
BL01RN1-A62
FERRITE BEAD; Rated Current: 7 A; Terminal Finish: Tin/Copper (Sn/Cu); Additional Features: AXIAL; SINGLE BEAD; JESD-609 Code: e2; Diameter (mm): 3.6;
BL01RN1-A62B1
FERRITE BEAD; Rated Current: 7 A; No. of Functions: 1; Additional Features: AXIAL; SINGLE BEAD; Mounting Type: THROUGH HOLE MOUNT; Dimensions: D3.6XL5 (mm);
BL01RN1A1E1A
FERRITE BEAD; Rated Current: 6 A; JESD-609 Code: e2; Packing Method: AMMO PACK; No. of Functions: 1; Additional Features: AXIAL STRAIGHT LEAD TYPE;
BL01RN1-A63T6
FERRITE BEAD; Rated Current: 6 A; Minimum Operating Temperature: -40 Cel; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); JESD-609 Code: e1; Additional Features: AXIAL STRAIGHT LEAD TYPE;
BL01RN1A1E1AA
FERRITE BEAD; Rated Current: 6 A; Mounting Type: THROUGH HOLE MOUNT; Dimensions: D3.6XL5 (mm); Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 85 Cel;
BL01RN1A1E1AB
FERRITE BEAD; Rated Current: 6 A; Packing Method: BULK; Maximum Operating Temperature: 85 Cel; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); No. of Functions: 1;
BL01RN1A1E1AJ
FERRITE BEAD; Rated Current: 6 A; Maximum Operating Temperature: 85 Cel; Packing Method: TAPE AND REEL; Mounting Type: THROUGH HOLE MOUNT; Minimum Operating Temperature: -40 Cel;
BL01RN1A1F1JA
FERRITE BEAD; Rated Current: 6 A; Packing Method: AMMO PACK; Maximum Operating Temperature: 85 Cel; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Manufacturer Series: BL01;
BL01RN1A1F1JB
FERRITE BEAD; Rated Current: 6 A; JESD-609 Code: e1; Maximum Operating Temperature: 85 Cel; Minimum Operating Temperature: -40 Cel; Diameter (mm): 3.6;
BL01RN1A1F1JJ
FERRITE BEAD; Rated Current: 6 A; No. of Functions: 1; JESD-609 Code: e1; Maximum Operating Temperature: 85 Cel; Manufacturer Series: BL01;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved