Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Murata Manufacturing's 78615/4JC-R is a pulse transformer with 1000V isolation voltage, 65uH inductance, and 4 V-us min ET product. Ideal for surface mount applications in datacom systems due to its compact L9.52XB9.0XH6.65 (mm) dimensions and wide operating temperature range (-40 to 85 °C).
Median Price
$1.400
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
VNN
Netroflash
$1.372
AZTECH Wire
$1.580
$1.520
$1.490
$1.460
High isolation voltage ensures safety and prevents electrical interference in data communication applications.
Appropriate inductance value for efficient pulse and data communication.
Convenient packaging method for automated manufacturing processes.
Low ET product value indicates good efficiency in transferring energy.
Compact size enables space-saving and easy integration in electronic devices.
High maximum operating temperature ensures reliability in various environmental conditions.
Wide temperature range allows for operation in diverse temperature conditions.
Low profile design for applications with space constraints.
Optimal width for surface mounting and compact placement on circuit boards.
Specifically designed for pulse applications, ensuring efficient signal transmission.
Surface mount capability allows for easy and secure attachment to PCBs.
Equal turns ratio provides balanced signal transfer and consistency in performance.
Pulse & Datacom Transformers 78615/4JC-R attributes and parameters. Explore more Pulse & Datacom Transformers devices from Murata Manufacturing
Additional Features:
Application:
Minimum ET Product:
Height:
Isolation Voltage:
Length:
Mounting Feature:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Packing Method:
Dimensions:
Inductance (Primary):
Transformer Type:
Turns Ratio (Np:Ns):
Width:
78615/4JC-R Transformers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Murata Manufacturing Co., Ltd. is a Japanese electronics manufacturer founded in 1944 by Akira Murata. Through its expansive supply chain network and innovative product portfolio, Murata designs and manufactures a wide variety of electronic components including capacitors, inductor coils, buzzers, sensors and more for applications in the automotive, medical, industrial and consumer sectors. Based in Nagaokakyo City in Kyoto Prefecture of Japan, Murata operates factories around the world with other facilities located throughout Asia Pacific region such as China and Thailand; North America; Europe; Latin America; Middle East & Africa; as well as Oceania.
Chairman of the Board
Tsuneo Murata
President
Norio Nakajima
Senior Executive VP, Board Member
Hiroshi Iwatsubo
Murata Integrated Passive Solution
Fabrication
Fab Initiation
1989
France
Caen
Wafer Capacity
12,500
Sendai Fab
2008
Japan
Sendai
20,000
Kanazawa - Fab 2
2016
Hakusan
10,000
Komoro
1980
Yasu Plant
1987
Yasu
14,500
Kanazawa Plant
1985
5,000
Vantaa - Fab 1
1998
Finland
Vantaa
Vantaa - Fab 2
2006
12,000
1N4148
Baneasa S A
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
LM555CN
Rochester Electronics
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Shape: RECTANGULAR; Surface Mount: NO; No. of Functions: 1;
SMBJ18CA
Continental Device India
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 3; Package Shape or Style: ROUND; Housing: PLASTIC; Output Interface Type: 1-WIRE INTERFACE;
BAV99
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
Transys Electronics
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
Yangzhou Yangjie Electronics
Bourns
Micro Commercial Components
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
Sangdest Microelectronics (Nanjing)
MICRODIODE ELECTRONICS SHENZHEN CO LTD
Dc Components
Thinking Electronic Industrial
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
14240R
Echelon
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): UL; CSA; TUV; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; Application: GENERAL PURPOSE;
1082
C&d Technologies
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Manufacturer Series: 1000; Approvals (V): UL; Application: GENERAL PURPOSE; Inductance (Primary): 6100 uH;
750311595
Wuerth Elektronik & Kg
Wuerth Elektronik & Kg 750311595 is a DATACOM TRANSFORMER with 1500V isolation voltage, 12uH inductance, and 3A output current. It is used for pulse applications in data communication systems due to its compact dimensions of L32.31xB27.03xH13.69 (mm) and surface mounting feature.
760390011
Wurth Elektronik 760390011 is a DATACOM TRANSFORMER with 1500V isolation voltage, 1000uH inductance, and 7 V-us min ET product. Ideal for LAN and RS-232 DATA INTERFACE applications, it operates b/w -40 to 125 °C with Tin/Silver terminal finish.
H5019NL
Pulse Electronics
H5019NL by Pulse Electronics is a datacom transformer with 4 functions and 4 primary windings. It has an isolation voltage of 1500 V and insertion loss of 1 dB. This transformer is suitable for applications such as 1000 BASE-T with a max operating temperature of 70°C.
H2019NL
H2019NL by Pulse Electronics is a datacom transformer with 2 primary windings, 22 secondary windings, and an isolation voltage of 1500V. It has dimensions of L12.70xB7.11xH5.97 mm and is suitable for applications such as 10/100 BASE-TX Ethernet due to its insertion loss of 1.2 dB and operating temperature range from 0°C to 70°C.
78602/2JC
Murata Manufacturing
Murata Manufacturing's 78602/2JC is a pulse transformer with 1000V isolation voltage, 380uH primary inductance, and 10 V-us min ET product. It is used for datacom applications requiring surface mounting feature and a compact size of 6.35mm x 9mm x 12.7mm.
78250MC
DATACOM TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 78250; Terminal Finish: Tin (Sn); Width: 8.89 mm; Maximum Operating Temperature: 85 Cel;
750311593
Wurth Elektronik 750311593 is a Datacom Transformer with 1500V isolation voltage, 15uH inductance, and 9A output current. Ideal for applications requiring surface mount transformers with dimensions of L32.31xB27.03xH13.69mm, operating b/w -40°C to 85°C, and supporting an input voltage range of 30-75V.
78604/4MC
Murata Manufacturing's 78604/4MC is a UL-approved pulse transformer with 1000V isolation voltage, 100uH inductance, and 2:1 turns ratio. It is used in datacom applications for surface mounting, offering dimensions of L9.52xB9.0xH6.35mm and operating temperatures from 0 to 70°C.
IL-20-0001
Schurter Ag
IL-20-0001 by Schurter Ag is a 1.1W Pulse Transformer with 4000V isolation voltage and 1500ns max pulse rise time. Ideal for datacom applications, it features inductance of 3000uH, operates b/w -25 to 70°C, and has dimensions of L28.0xB23.0xH14.0mm for through-hole mounting.
PM-DB2791S
Holt Integrated Circuits
PM-DB2791S by Holt Integrated Circuits is a MIL-STD-1553 approved Pulse & Datacom Transformer with dimensions of L15.87xB15.87xH6.35 mm. It operates b/w -55 to 130°C, has a turns ratio of 1:2.5, and uses Tin/Lead terminal finish. Ideal for DATA BUS INTERFACE applications due to its surface mount feature and DATACOM TRANSFORMER type design.
ISRF-0235-D101
ISRF-0235-D101 by Schurter Ag is a pulse transformer with an isolation voltage of 3200V, inductance of 1100uH, and max pulse rise time of 50ns. Ideal for datacom applications, it operates b/w -25°C to 100°C and features surface mounting with dimensions L15.2xB13.0xH11.0mm.
T4032
T4032 by Pulse Electronics is a DATACOM TRANSFORMER with 1500V isolation voltage, 11900uH inductance, and 1.25CS:1CT turns ratio. It is designed for ISDN applications, featuring dimensions of L13.46xB13.11xH12.07mm and surface mounting feature on TRAY packing method.
1016C
Murata Power Solutions
PULSE TRANSFORMER; Mounting Feature: PCB MOUNT; Terminal Finish: Matte Tin (Sn); Height: 15.75 mm; Minimum Operating Temperature: 0 Cel; Length: 15.06 mm;
HX5084NL
Pulse Electronics' HX5084NL is a Datacom Transformer with 1500V isolation voltage, 350uH inductance, and 1:1 turns ratio. Ideal for surface mount applications in data communication systems due to its compact L15.24xB7.62xH4.14 (mm) dimensions and -40 to 85°C operating temperature range.
HX1188NLT
HX1188NLT by Pulse Electronics is a DATACOM TRANSFORMER with 1650V isolation voltage, 350uH inductance, and 1:1 turns ratio. Ideal for surface mount applications in data communication systems due to its compact L12.7xB7.11xH5.97 (mm) dimensions and wide operating temperature range (-40°C to 85°C).
749020100A
749020100A by Wurth Elektronik is a pulse & datacom transformer with an isolation voltage of 1500V. It has a primary inductance of 350uH and dimensions of L12.7XB8.6XH3.0 (mm). This transformer is suitable for LAN applications, specifically for 10/100/1000 BASE-T networks.
Adesto Technologies
DATACOM TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Approvals (V): UL; CSA; TUV; Terminal Finish: MATTE TIN; Minimum Operating Temperature: -40 Cel; No. of Functions: 1;
ESMIT-4180/C
Sumida
Sumida's ESMIT-4180/C is a DATACOM TRANSFORMER with 125uH inductance, AEC-Q200 approval, and -40 to 105°C operating range. Ideal for pulse & datacom applications due to its compact size (3.5x5.2x7.1mm) and surface mount feature for easy installation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
78615/3JC-R
Murata Manufacturing's 78615/3JC-R is a pulse transformer with 1000V isolation voltage, 190uH inductance, and 6 V-us min ET product. Ideal for datacom applications, it features surface mounting and compact dimensions of L9.52xB9.0xH6.65 mm.
78613/3JC-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum ET Product: 6 V-us; Length: 9.52 mm; No. of Functions: 1; Isolation Voltage: 1000 V;
78613/3MC
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 786; Approvals (V): UL; Terminal Finish: Matte Tin (Sn); Width: 9 mm;
78613/3JC
Murata Manufacturing's 78613/3JC is a pulse transformer with 1000V isolation voltage, 190uH primary inductance, and 6V-us min ET product. Ideal for surface mount applications in datacom systems due to its compact size (6.35mm x 9mm x 12.7mm) and turns ratio of 1CT:1.
78615/9JC-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Height: 6.65 mm; Application: GENERAL PURPOSE; Minimum Operating Temperature: -40 Cel;
78613/4JC-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Additional Features: CENTER TAPPED SECONDARY; Maximum Operating Temperature: 85 Cel; No. of Functions: 1; Isolation Voltage: 1000 V;
78615/1JC-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Width: 9 mm; Inductance (Primary): 1700 uH; No. of Functions: 1; Turns Ratio (Np:Ns): 1CT:1CT;
78615/8JC-R
Murata Manufacturing's 78615/8JC-R is a Pulse Transformer with 1000uH inductance, 1000V isolation voltage, and 15 V-us min ET product. Ideal for datacom applications, it features a compact size of L9.52xB9.0xH6.65 mm and surface mounting capability.
78613/2JC-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum ET Product: 10 V-us; No. of Functions: 1; Packing Method: TAPE & REEL; Maximum Operating Temperature: 85 Cel;
78615/16JC-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Additional Features: CENTER TAPPED SECONDARY; Height: 6.65 mm; Minimum ET Product: 28 V-us; Packing Method: TAPE & REEL;
78613/3C
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Minimum ET Product: 6 V-us; No. of Functions: 1; Isolation Voltage: 1000 V; Turns Ratio (Np:Ns): 1CT:1;
78613/4C
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Isolation Voltage: 1000 V; Inductance (Primary): 67 uH; Turns Ratio (Np:Ns): 1CT:1; No. of Functions: 1;
78613/8C
PULSE TRANSFORMER; Mounting Feature: THROUGH HOLE MOUNTED; Inductance (Primary): 1000 uH; Length: 9.52 mm; Turns Ratio (Np:Ns): 1CT:1; Width: 9 mm;
78615/8JC
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Height: 6.35 mm; Packing Method: TR; Turns Ratio (Np:Ns): 1CT:1CT; Application: GENERAL PURPOSE;
78613/16JC-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum ET Product: 28 V-us; Inductance (Primary): 3200 uH; Turns Ratio (Np:Ns): 1CT:1; Application: GENERAL PURPOSE;
78613/1JC-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Isolation Voltage: 1000 V; Additional Features: CENTER TAPPED SECONDARY; Width: 9 mm; Maximum Operating Temperature: 85 Cel;
78613/8JC-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; No. of Functions: 1; Additional Features: CENTER TAPPED SECONDARY; Isolation Voltage: 1000 V; Width: 9 mm;
78613/9JC-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Packing Method: TAPE & REEL; Dimensions: L9.52XB9.0XH6.65 (mm); Turns Ratio (Np:Ns): 1CT:1; Isolation Voltage: 1000 V;
78615/2JC-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Minimum Operating Temperature: -40 Cel; Inductance (Primary): 500 uH; Length: 9.52 mm; Packing Method: TAPE & REEL;
78615/4MC-R
PULSE TRANSFORMER; Mounting Feature: SURFACE MOUNT; Manufacturer Series: 786; Approvals (V): UL; Terminal Finish: Matte Tin (Sn); Length: 9.52 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved