Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MC1206B102K102CT by Multicomp Pro is a ceramic capacitor with 10% negative tolerance and X7R temperature characteristics. With 0.001 uF capacitance, 1000 V rated DC voltage, it's ideal for surface mount applications in electronics for its compact size and wide operating temperature range from -55 to 125 °C.
Median Price
$0.090
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Newark
1+ parts
$0.142
100+ parts
$0.110
1k+ parts
$0.047
10k+ parts
$0.029
Element14
-
$0.038
Nova Conductors
$0.007
Vyrian
LIBRA Elektronik GmbH
Semicontronic
$0.003
Argo Parts USA
Netroflash
Aztec Data Supply Inc.
$0.424
Continental Prestige Electronics
$0.037
$0.035
Ceramic capacitors are known for their stability and reliability, making this product a good choice for applications requiring long term performance.
Rectangular packages are easier to handle and mount, providing convenience during assembly and maintenance.
Multi-layer construction increases capacitance in a smaller package size, ideal for compact electronic designs.
Having two terminals simplifies the connection process, making it easier to integrate into circuits.
Surface mount technology allows for efficient placement on circuit boards, saving space and improving manufacturing processes.
X7R capacitors have a stable temperature coefficient, ensuring consistent performance over a wide range of temperatures.
With a capacitance of 0.1 uF, this capacitor is suitable for filtering and decoupling applications in electronic circuits.
This capacitor can handle a maximum operating voltage of 16 V, making it suitable for low voltage applications.
Fixed Capacitors MC1206B102K102CT attributes and parameters. Explore more Fixed Capacitors devices from Multicomp Pro
Capacitance:
Capacitor Type:
Dielectric Material:
Height:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Shape:
Width:
MC1206B102K102CT Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Hy Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Formosa Microsemi
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Maximum Drain Current (Abs) (ID): .115 A;
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
Promax-johnton
1N4148
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
PIC18F4550-I/P
Microchip Technology
PIC18F4550-I/P by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring low power consumption and high-speed data processing. With 2048 RAM bytes and 256 Data EEPROM size, this CMOS technology-based microcontroller offers versatile performance in various embedded systems.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BSS138BK,215
NXP Semiconductors
NXP Semiconductors' BSS138BK,215 is a N-CHANNEL FET with 0.36A max drain current and 0.42W power dissipation. Ideal for applications requiring single configuration and surface mount technology, such as enhancement mode operation in temperatures up to 150°C.
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Eic Semiconductor
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
MBR0530T1G
Onsemi
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
LM358N
Harris Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Solid State Devices
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
Micro Commercial Components
GRM1885C1H102JA01D
Murata Manufacturing
Murata Manufacturing's GRM1885C1H102JA01D is a ceramic capacitor with 0.001uF capacitance and 50V rated DC voltage. Featuring C0G temperature characteristics, it has a compact SMT package suitable for surface mount applications. With a negative tolerance of 5%, it operates b/w -55 to 125 °C, making it ideal for various electronic circuits.
0603YC105KAT2A
KYOCERA AVX
0603YC105KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 1uF capacitance and 16V URdc. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C. Ideal for applications requiring compact size and high reliability in electronic circuits.
ECA2WM4R7
Panasonic
ECA2WM4R7 by Panasonic is a 4.7uF aluminum electrolytic capacitor with 450V rated DC voltage. It features tan delta of 0.20, leakage current of 0.1369mA, and ripple current of 79mA, suitable for applications requiring high capacitance and voltage stability in electronic circuits.
ECEA1HKS4R7
Panasonic ECEA1HKS4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -40 to 85°C.
CGA4J1X7R1V475K125AE
TDK
CGA4J1X7R1V475K125AE by TDK is a ceramic capacitor with 4.7uF capacitance, rated at 35V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
08055C103KAT2A
08055C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance, 50V URdc, and X7R temperature code. Ideal for applications requiring compact size and high reliability in a wide temperature range from -55 to 125°C.
GRM21BR61E226ME44L
The Murata Manufacturing GRM21BR61E226ME44L is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
GRM21BR60J476ME15L
Murata Manufacturing's GRM21BR60J476ME15L is a ceramic capacitor with 47uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55°C to 85°C, making it ideal for surface mount applications in various electronic devices.
TAJD106K035RNJ
TAJD106K035RNJ by KYOCERA AVX is a 10uF TANTALUM CAPACITOR with 35V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0035mA, and Ripple Current of 155mA. Ideal for applications requiring compact SMT capacitors with high reliability and low ESR in a wide temperature range from -55 to 125 °C.
BFC237036472
Vishay Intertechnology
Vishay Intertechnology's BFC237036472 is a rectangular package film capacitor with a capacitance of 0.0047 uF. It has a rated AC voltage of 160 V and a rated DC voltage of 250 V. This capacitor is commonly used in applications requiring fixed capacitors, such as automotive electronics or industrial equipment.
M39006/22-0639
Vishay Sprague
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 86 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
GRM32ER71A476ME15L
Murata Manufacturing's GRM32ER71A476ME15L is a ceramic capacitor with 47uF capacitance and 10V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance under varying temperatures.
VJ0603Y103KXACW1BC
Vishay Intertechnology's VJ0603Y103KXACW1BC is a ceramic capacitor with 0.01uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications in electronics requiring compact, high-performance capacitors.
GRM21BR71A106KE51L
Murata Manufacturing's GRM21BR71A106KE51L is a ceramic capacitor with 10uF capacitance, 10V rated DC voltage, and X7R temperature characteristics. Ideal for surface mount applications in electronics due to its compact size (2x1.25x1.25mm) and high operating temperature range (-55 to 125°C).
R46.KI.3100.00.M1.K
KEMET Corporation
R46.KI.3100.00.M1.K by KEMET: POLYPROPYLENE film capacitor with 0.1uF capacitance, 275V URac, -40 to 110°C temp range. Ideal for IEC60384-14 standard applications requiring reliable fixed capacitors in bulk packaging.
GRM32ER72A225KA35L
Murata Manufacturing's GRM32ER72A225KA35L is a ceramic capacitor with 2.2uF capacitance and 100V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and high reliability in various electronic circuits.
M39006/25-0143
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
GRM21BR61H106KE43L
Murata Manufacturing's GRM21BR61H106KE43L is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and 10% tolerance. Ideal for SMT applications due to its compact size of 2x1.25x1.25mm.
LMK107BJ475KA-T
Taiyo Yuden
Taiyo Yuden's LMK107BJ475KA-T is a ceramic capacitor with 4.7uF capacitance and 10V URdc. Featuring X5R temperature characteristics, it operates b/w -55 to 85 °C. Ideal for SMT applications due to its compact size of 1.6mm x 0.8mm x 0.8mm and wraparound terminals.
C1210C226K3RACTU
KEMET C1210C226K3RACTU is a 22uF ceramic capacitor with X7R temperature characteristics, 25V rated DC voltage, and 10% negative tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range from -55 to 125°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MC1206B102K202CT
MC1206B102K202CT by Multicomp Pro is a ceramic capacitor with 0.001uF capacitance and 2000V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring high voltage and reliability in compact designs.
MC1206B475K500CT
MC1206B475K500CT by Multicomp Pro is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
MC1206X226K6R3CT
MC1206X226K6R3CT by Multicomp Pro is a ceramic capacitor with 22uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55 to 85 °C, making it ideal for SMT applications requiring compact size and high reliability.
MC1206B105K500CT
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
MC1206X106K6R3CT
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
MC1206X106K250CT
MC1206X106K250CT by Multicomp Pro is a 10uF ceramic capacitor with X5R temperature characteristics. It operates b/w -55 to 85°C, suitable for SMT mounting in various electronic applications. Featuring a 10% tolerance and rated at 25V, it is ideal for compact designs requiring stable capacitance performance.
MC1206B474K500CT
MC1206B474K500CT by Multicomp Pro is a ceramic capacitor with capacitance of 0.47uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in various electronic circuits requiring stable capacitance at different temperatures.
MC12CF010D-F
Cornell Dubilier Electronics
MICA CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .000001 uF; Rated DC Voltage (URdc): 1000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: MICA;
MC1206X106K160CT
MC1206X106K160CT by Multicomp Pro is a ceramic capacitor with 10uF capacitance and 16V rated DC voltage. It features X5R temperature characteristics, -55 to 85 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance.
MC1206B104J500CT
MC1206B104J500CT by Multicomp Pro is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125 °C operating range, and 5% tolerance. Ideal for SMT applications requiring compact size and high reliability in various electronic circuits.
MC1206B103K101CT
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
MC12CF050C-F
MC12CF050C-F by Cornell Dubilier Electronics is a MICA CAPACITOR with a capacitance of 0.000005 uF and a rated DC voltage of 1000 V. It has a negative tolerance of 5% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in SMT applications requiring high voltage and stability.
MC12CF050D-F
MICA CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .000005 uF; Rated DC Voltage (URdc): 1000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: MICA;
MC12FA121F-F
MICA CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .00012 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: MICA;
MC1206N2R2C201CT
CERAMIC CAPACITOR; Capacitance: .0000022 uF; Rated DC Voltage (URdc): 200 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Packing Method: TR, 7 Inch;
MC1206N2R2C202CT
CERAMIC CAPACITOR; Capacitance: .0000022 uF; Rated DC Voltage (URdc): 2000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Positive Tolerance: 11.3636 %;
MC12CF020D-F
MICA CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .000002 uF; Rated DC Voltage (URdc): 1000 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: MICA;
MC1206B103K201CT
CERAMIC CAPACITOR; Capacitance: .01 uF; Rated DC Voltage (URdc): 200 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Package Style (Meter): SMT;
MC1206N470J500CT
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .000047 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
MC1206B102K101CT
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .001 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved