Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Monolithic Power Systems' MPM3650CGQW-Z is a 24-terminal switching regulator with a max output current of 6A and a max switching frequency of 1600 kHz. It operates b/w -40 to 125°C, making it suitable for various applications requiring efficient power management in compact spaces.
Median Price
$5.885
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
DigiKey
1+ parts
$5.670
100+ parts
$3.636
1k+ parts
$3.488
10k+ parts
-
Monolithic Power Systems
$6.100
$4.490
Nova Conductors
$3.420
Vyrian
Sensible Micro Corp
AZTECH Wire
$1.330
$1.280
$1.250
$1.230
Continental Prestige Electronics
$3.352
Argo Parts USA
Netroflash
Semicontronic
$5.180
$5.050
$5.025
Ampacity Inc.
Aztec Data Supply Inc.
$9.290
Corohmni
$19.686
iodParts Technologies Inc.
Authorized Procurement Solutions
Robosynatics
Lucentia Tech
Easy to mount on circuit boards, saving time and effort during assembly.
Compact shape allows for efficient use of space on the PCB.
Provides flexibility in connection options and allows for multiple inputs/outputs.
Can withstand high temperatures, ensuring reliable performance in various environments.
Suitable for applications requiring low output voltage levels.
Efficient control technique for regulating output voltage, ensuring stable operation.
Switching Regulators & Controllers MPM3650CGQW-Z attributes and parameters. Explore more Switching Regulators & Controllers devices from Monolithic Power Systems
Other IC type:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current:
Maximum Output Voltage:
Minimum Output Voltage:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Surface Mount:
Switcher Config:
Maximum Switching Frequency:
Terminal Form:
Terminal Position:
Width (mm):
MPM3650CGQW-Z Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
It started with a vision. Michael Hsing, pioneering engineer and CEO, founded Monolithic Power Systems, Inc. in 1997 with the belief that an entire power system could be integrated onto a single chip. Under his leadership, MPS has succeeded not only in developing a monolithic power module that truly integrates an entire power system in a single package, but also it continues to defy industry expectations with its patented groundbreaking technologies. We make power design fun! With our innovative proprietary technology processes, we thrive on re-imagining and re-defining the possibilities of high-performance power solutions in industrial applications, telecom infrastructures, cloud computing, automotive, and consumer applications. We are creative thinkers. We break boundaries. We take technology to new levels. As a leading international semiconductor company, Monolithic Power Systems (MPS) creates cutting-edge solutions to improve the quality of life with green, easy-to-use products.
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Multicomp Pro
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
SMBJ18CA
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Mde Semiconductor
RC0603JR-070RL
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
2N7002
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
Grande Electronics
2N2222A
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
NXP Semiconductors
MBR130T1G
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
LM3150MH/NOPB
National Semiconductor
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
TPS62111RSATG4
TPS62111RSATG4 by Texas Instruments is a voltage-mode switching regulator with a max output current of 2.4A and a max switching frequency of 1100kHz. It operates in an industrial temperature range from -40°C to 85°C, making it suitable for various applications requiring stable power conversion in compact spaces. The chip carrier package style with very thin profile and no-lead terminal form enhances its versatility for use in space-constrained designs.
LM5008MM
LM5008MM by Texas Instruments is a switching regulator with 8 terminals, operating b/w -40 to 125°C. It supports input voltages from 9.5V to 95V and outputs up to 7V at 0.61A. Ideal for automotive applications due to its compact size, high efficiency (up to 600kHz), and current-mode control technique.
TPS54060ADGQ
TPS54060ADGQ by Texas Instruments is a switching regulator with a max output current of 0.5A and max output voltage of 58V, suitable for automotive applications. It operates b/w -40 to 125°C, has a control mode of current-mode, and uses pulse width modulation as the control technique.
TPS63060DSCT
TPS63060DSCT by Texas Instruments is a switching regulator with a max output current of 1.3A and a max output voltage of 8V. It operates in industrial temperature range (-40 to 85°C) and uses pulse width modulation for control, making it suitable for various applications requiring efficient power conversion.
LM5163DDAR
LM5163DDAR by Texas Instruments is a small outline switching regulator with a max output voltage of 90V and max output current of 0.5A. Ideal for automotive applications, it operates in temperatures ranging from -40 to 150°C, making it suitable for various electronic devices requiring efficient power management.
LM3150MH/NOPB by Texas Instruments is a switching controller with 14 terminals, operating temperature range of -40 to 125°C, and max output current of 12A. It is ideal for automotive applications due to its hysteric current mode control technique and wide input voltage range from 6V to 42V. The compact rectangular package with small outline and heat sink makes it suitable for space-constrained designs.
LMZ14202TZ-ADJ/NOPB
Switching Regulator or Controllers; No. of Terminals: 7; Surface Mount: YES; Peak Reflow Temperature (C): 245; Moisture Sensitivity Level (MSL): 3; Terminal Position: SINGLE;
TPS62177DQCR
TPS62177DQCR by Texas Instruments is a switching regulator with a 3.3V output voltage, 0.5A output current, and 1000 kHz max switching frequency. It is ideal for industrial applications requiring a compact design and operates within a wide temperature range of -40 to 85°C.
TPS54620RGYR
TPS54620RGYR by Texas Instruments is a 6A BUCK switching regulator with 0.8V min output, 15V max output, and 1600kHz max switching frequency. Ideal for automotive applications due to its -40 to 150°C operating temperature range and current-mode control technique.
BD9G101G-TR
ROHM
ROHM's BD9G101G-TR is a switching regulator with max. output current of 0.5A, operating temp. range -40 to 105°C, and PWM control mode. Ideal for industrial applications requiring a compact design and high efficiency power conversion up to 42V input voltage and 5V output voltage.
LTM4622IY#PBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 25; Package Code: BGA; Package Shape: SQUARE; Surface Mount: YES;
UCC28180DR
UCC28180DR by Texas Instruments is a current-mode power factor controller with a max operating temperature of 125°C. It features a switching frequency of 250 kHz and is suitable for boost switcher configurations in automotive applications. The package style is small outline, making it ideal for surface mount designs with 8 terminals.
TPS54231DR
TPS54231DR by Texas Instruments is a switching regulator with 2A output current, 570kHz max switching frequency, and -40 to 150°C operating temp. Ideal for automotive applications due to its compact size, pulse width modulation control technique, and buck switcher configuration.
LMR14006YDDCR
LMR14006YDDCR by Texas Instruments is a switching regulator with a max output voltage of 30V and max output current of 0.6A, suitable for automotive applications. Operating temperature ranges from -40 to 125°C, making it ideal for various environments. Control mode is current-mode with pulse width modulation technique for efficient power management.
LM5008AMMX/NOPB
LM5008AMMX/NOPB by Texas Instruments is a switching regulator with a max output current of 0.35 A and a max input voltage of 95 V. It is commonly used in automotive applications due to its temperature grade and small package size.
LTM4644IY-1#PBF
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 77; Package Code: BGA; Package Shape: RECTANGULAR; Surface Mount: YES;
LM3478MM
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE; Surface Mount: YES;
LMR16030SDDAR
LMR16030SDDAR by Texas Instruments is a switching regulator with max output current of 3A, operating temp range -40 to 125°C, and input voltage range from 4.3V to 60V. Ideal for automotive applications due to its compact size (4.9mm x 3.9mm) and high switching frequency of 2500kHz.
TPS630701RNMT
TPS630701RNMT by Texas Instruments is a 15-terminal switching regulator with a max output current of 2A and a control mode of current-mode. It operates b/w -40 to 125°C, making it suitable for automotive applications requiring efficient power management in compact spaces.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MPM3620AGQV-Z
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 20; Package Shape: RECTANGULAR; Surface Mount: YES; Package Style (Meter): SPECIAL SHAPE;
MPM3510AGQV-Z
Monolithic Power Systems' MPM3510AGQV-Z is a 19-terminal switching regulator with a control mode of current-mode and PWM control technique. Operating b/w -40 to 125°C, it supports input voltages from 4.5V to 36V, making it ideal for automotive applications due to its compact size and high max switching frequency of 1150 kHz.
MPM3510AGQV-P
Switching Regulator or Controllers; Temperature Grade: AUTOMOTIVE; No. of Terminals: 19; Package Code: XMA; Package Shape: RECTANGULAR; Surface Mount: YES;
MPM3506AGQV-Z
Monolithic Power Systems' MPM3506AGQV-Z is a 19-terminal switching regulator with a max output voltage of 33.12 V and current-mode control. Operating b/w -40 to 125 °C, it's ideal for automotive applications due to its compact chip carrier package and pulse width modulation control technique at a max frequency of 1500 kHz.
MPM3506AGQV-P
Monolithic Power Systems' MPM3506AGQV-P is a switching regulator with 0.8V min output and 33.12V max output voltage, suitable for applications requiring up to 0.6A output current. Operating b/w -40°C to 125°C, it supports PWM control mode and BUCK switcher configuration at a max frequency of 1500kHz in a compact chip carrier package.
MPM3620AGQV-P
MPM3620AGQV-P by Monolithic Power Systems is a surface mount switching regulator with 1 function and 20 terminals. It has a max operating temperature of 125°C and a min operating temperature of -40°C. This IC type is commonly used in automotive applications.
MPM3630GQV-Z
Monolithic Power Systems' MPM3630GQV-Z is a 20-terminal switching regulator with PWM control, operating b/w -40 to 125°C. With a buck configuration and max input voltage of 18V, it's ideal for automotive applications due to its compact size (5x3mm) and high switching frequency of 2MHz.
MPM3620GQV-Z
Monolithic Power Systems' MPM3620GQV-Z is a 1-function switching regulator with PWM control technique, operating b/w -40 to 125°C. It has a buck switcher configuration, suitable for automotive applications with input voltage range of 4.5-24V and compact dimensions of 5x3mm.
MPM3810GQB-Z
Monolithic Power Systems' MPM3810GQB-Z is a 1.2A BUCK switching regulator with 5V nominal input voltage, 6V max output voltage, and 4200 kHz max switching frequency. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and compact chip carrier package style.
MPM3833CGRH-Z
Monolithic Power Systems' MPM3833CGRH-Z is a 18-terminal switching regulator with PWM control, operating at up to 1150 kHz. Ideal for automotive applications, it has a wide input voltage range of 2.75-6V and output voltage range of 0.6-6V, in a compact rectangular package measuring 3.5mm x 2.5mm x 1.65mm.
MPM3810GQB-P
MPM3810GQB-P by Monolithic Power Systems is a 12-terminal switching regulator with a max output current of 2.6A and a max switching frequency of 4200 kHz. Ideal for automotive applications, it operates b/w -40 to 125 °C with a package style of special shape.
MPM3515GQV-Z
MPM3515GQV-Z by Monolithic Power Systems is a 17-terminal switching regulator with a max output voltage of 30.6 V and current-mode control mode. Ideal for automotive applications, it operates b/w -40 to 125 °C, with a max switching frequency of 2600 kHz and output current of 5.5 A.
MPM3510AGQV
Monolithic Power Systems' MPM3510AGQV is a 19-terminal switching regulator with a control mode of current-mode and PWM control technique. Operating temperature ranges from -40 to 125°C, making it suitable for automotive applications. With a max input voltage of 36V and switching frequency of 1150 kHz, it's ideal for compact power management solutions.
MPM3630GQV-P
Monolithic Power Systems' MPM3630GQV-P is a 3A BUCK switching regulator with PWM control, operating at up to 2MHz. It has a wide input voltage range of 4.5-18V and can deliver an output as low as 0.6V. With a compact package size of 5x3mm, it's ideal for applications requiring high efficiency power conversion in limited space.
MPM3811GG-Z
MPM3811GG-Z by Monolithic Power Systems is a 10-terminal switching regulator with a max output current of 1A and a max switching frequency of 3000 kHz. Ideal for automotive applications, this chip carrier package has a width of 2mm and operates in temperatures ranging from -40 to 125°C.
MPM3822CGRH-Z
Monolithic Power Systems' MPM3822CGRH-Z is a current-mode switching regulator with a buck switcher config. It operates in automotive-grade temperatures (-40 to 125°C) and has a max output voltage of 6V. Ideal for applications requiring high-frequency PWM control in compact microelectronic assemblies.
MPM3810GQB-25-P
MPM3810GQB-25-P by Monolithic Power Systems is a 12-terminal switching regulator with a max output current of 2.6A and a buck switcher configuration. Operating temperature ranges from -40 to 125°C, making it suitable for automotive applications requiring high efficiency and compact design. With a max switching frequency of 4200 kHz, this surface-mount device is ideal for power management in various electronic systems.
MPM3620AGQV
Monolithic Power Systems' MPM3620AGQV is a 20-terminal switching regulator with PWM control technique. It operates in automotive-grade temperature range (-40 to 125°C) and supports buck configuration for input voltages ranging from 4.5V to 24V. With a compact rectangular package (5x3mm), it's ideal for surface-mount applications in various electronic devices.
MPM3810GQB-18-Z
MPM3810GQB-18-Z by Monolithic Power Systems is a surface mount switching regulator with 1 function. It has a rectangular package style, 12 terminals, and operates at temperatures ranging from -40 to 125 °C. This hybrid technology device is commonly used in automotive applications for pulse width modulation control and buck switching configuration.
MPM3550EGLE
SWITCHING REGULATOR; Switcher Config: BUCK; Moisture Sensitivity Level (MSL): 3; Maximum Supply Current (Isup): 2000 mA;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved