Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex MS-25036-150 is a UL-approved RING TERMINAL for 16 AWG wire with 300V rating. Ideal for FEMALE terminals, it supports wire cross section of 1.42 mm2, ensuring secure electrical connections in various applications.
Median Price
$0.316
Lifecycle Status
Suppliers In-Stock
31
In-Stock Inventory
1k+
Interstate Connecting
1+ parts
$0.257
100+ parts
-
1k+ parts
$0.226
10k+ parts
$0.204
Heilind Electronics
$0.277
$0.233
$0.219
Mouser Electronics
$0.680
$0.559
$0.540
$0.533
TTI
$0.374
$0.329
$0.317
TTI Europe
$0.331
Verical
$0.302
Freelance Electronics
$0.128
$0.134
$0.127
DF Sales Co.
$0.160
Digiode
$0.263
Component Electronics Inc.
$0.460
$0.350
$0.300
Nova Conductors
$0.527
Electro Enterprises
$0.938
$0.857
$0.517
$0.462
Miltronics Inc.
$1.243
FDH Electronics
$1.331
$0.907
$0.735
$0.655
Vyrian
Q Components
IBS Electronics
$1.574
$1.014
$0.973
Electronic Expediters
Resion
First Choice Components Inc.
Kallista Electronics Ltd
Bisco
Electro Mavin
MISTER SPROCKETS
EMSNET
Mil-Aero Solutions, Inc.
Bristol Electronics
Speed Components Ltd
A2Z Electronics, Inc.
Sogenti Electronics
Semicontronic
$0.235
$0.229
$0.228
Corphita
$0.249
Bastille Electronics
$0.501
$0.476
$0.469
Continental Prestige Electronics
$0.516
Argo Parts USA
$0.511
Netroflash
Andel Nordic
$29.210
$20.448
Authorized Procurement Solutions
Perfect Parts
4 Star Electronics, Inc. (Excess)
Aztec Data Supply Inc.
UL certification ensures that the product has met strict safety standards and can be trusted for reliable performance.
Suitable for handling relatively high currents, making it versatile for various applications.
Capable of handling moderate voltage levels, ensuring safe and efficient operation.
Ring terminals provide a stable and secure connection, reducing the risk of loose connections or wire disconnections.
Optimal wire cross-section helps to maintain proper conductivity and reduce voltage drop, improving overall electrical performance.
Female terminals are commonly used for connecting to male terminals, providing a reliable and secure connection.
Terminals & Terminal Blocks MS-25036-150 attributes and parameters. Explore more Terminals & Terminal Blocks devices from Molex
Product Type:
Additional Features:
Safety Compliance:
Rated Voltage:
Wire Gauge:
Wire Cross Section:
Total Ways:
Terminal Gender:
MS-25036-150 Terminals & Terminal Blocks trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.90.40.00
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
BSS138
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
BAV99
Won-top Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
1N4148WT
Onsemi
1N4148WT by Onsemi is a single rectifier diode with a max output current of 0.3A and forward voltage of 0.72V. It has a small outline package style, matte tin terminal finish, and operates at temperatures up to 150°C. Ideal for applications requiring fast reverse recovery time such as power supplies and signal demodulation circuits.
LM2931AZ-5.0RAG
LM2931AZ-5.0RAG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage, 0.1A max output current, and 0.6V max dropout voltage. Ideal for applications requiring stable voltage regulation in temperature-sensitive environments up to 150°C.
ABS25-32.768KHZ-1-T
Abracon
Abracon's ABS25-32.768KHZ-1-T crystal oscillator offers 10 ppm frequency tolerance, 126% stability, and 50000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal operating frequency, such as IoT devices and precision timing systems.
Microsemi
MMSZ5245BT1G
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
SS495A-SP
Honeywell Sensing And Control
SS495A-SP by Honeywell is a magnetic field sensor with 10.5V max supply voltage, 3" body width, and 1.5% linearity. Ideal for applications requiring a Hall effect sensor with -40 to 150°C operating temperature range, such as position sensing in automotive or industrial systems.
BSS123LT1G
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
MMBT3904-7-F
Diodes Incorporated
Diodes Inc. MMBT3904-7-F is a NPN BJT transistor for switching applications. Features include VCEsat of 0.3V, hFE of 30, and IC of 0.2A. With a max operating temp of 150°C, it's ideal for small outline SMT designs in automotive electronics.
MBR1560CT
General Instrument
MBR1560CT by General Instrument is a common cathode rectifier diode with a max forward voltage of 0.75V and max output current of 15A. It is used for efficiency applications, has a package shape of rectangular, and can operate in temperatures ranging from -65 to 150 °C.
FDN5618P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1-770904-1
Tyco Electronics Amp
WIRE TERMINAL; Wire Gauge: 22 AWG; Terminal Gender: FEMALE; Manufacturer Series: 770904; Wire Cross Section: .9 mm2;
327583
BUTT TERMINAL; Wire Gauge: 14 AWG; Terminal Gender: FEMALE; Wire Cross Section: 2.62 mm2;
41480
TE Connectivity
TAB TERMINAL; Terminal Gender: MALE; Safety Approval: UL;
51863-4
RING TERMINAL; Wire Gauge: 18 AWG; Voltage (Rated): 300 V; Wire Cross Section: .96 mm2; Terminal Gender: FEMALE; Safety Approval: UL;
320569
RING TERMINAL; Additional Features: NYLON; Wire Gauge: 10 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Wire Cross Section: 6.64 mm2;
51864-5
TE Connectivity's 51864-5 is a UL-approved FEMALE RING TERMINAL for 14 AWG wire with a rated voltage of 300V. Ideal for applications requiring secure electrical connections and compatibility with wires up to 2.08 mm2 cross-section.
320559
BUTT TERMINAL; Additional Features: MATERIAL: COPPER ALLOY; Wire Gauge: 16 AWG; Wire Cross Section: 1.42 mm2; Safety Approval: UL;
709150001030006
KYOCERA AVX
PCB TERMINAL; Current (Rated): 1 A; Terminal Gender: MALE;
2-320563-4
TE Connectivity 2-320563-4 is a UL-approved FEMALE RING TERMINAL for 14 AWG wire with a rated voltage of 300V. Featuring a wire cross section of 2.15 mm2, it is ideal for various applications in Terminals & Terminal Blocks category.
MCV1,5/2-G-3,5
Phoenix Contact
Phoenix Contact's MCV1,5/2-G-3,5 is a 4-way barrier strip terminal block with 1.5mm2 wire cross section and 15 AWG wire gauge. Rated for 8A current and 160V voltage, it is ideal for board mounting applications requiring CB, CSA, CUL, EAC, UL, VDE safety approvals.
MPT0,5/2-2,54
Phoenix Contact's MPT0,5/2-2,54 is a 2-way barrier strip terminal block with a rated current of 6A and voltage of 160V. It supports wire gauge up to 20 AWG and wire cross-section of 0.5mm². Ideal for board mounting applications, it holds safety approvals from CSA, CUL, EAC, and UL.
1326
Advanced Interconnections
PCB TERMINAL; Terminal Gender: FEMALE;
282-901
Wago
The Wago 282-901 is a DIN RAIL mounted MODULAR TERMINAL BLOCK with 2 rows, rated for 30A current and 600V voltage. Featuring SPRING LOADED fastening, it accommodates wire gauge up to 10 AWG (6 mm2) and holds CSA/UL safety approvals. Ideal for industrial applications requiring secure electrical connections.
12129493
Aptiv
PUSH-ON TERMINAL; Terminal Gender: FEMALE; Wire Cross Section: 3 mm2;
1711725
Phoenix Contact 1711725 is a BARRIER STRIP TERMINAL BLOCK with 2.5 mm2 Wire Cross Section and 24 A Rated Current. It has a Mounting Type of BOARD and Safety Approvals from CB, CSA, UL, etc. Ideal for applications requiring secure wire connections at up to 400 V voltage levels.
2-31894-2
TE Connectivity 2-31894-2 is a UL-approved FEMALE RING TERMINAL for 22 AWG wire with a rated voltage of 300V. Ideal for applications requiring terminals & terminal blocks, accommodating wire cross sections up to 1.42 mm².
2-36161-3
TE Connectivity's 2-36161-3 is a UL-approved RING TERMINAL with a wire gauge of 12 AWG and rated voltage of 300 V. It is designed for use in terminals & terminal blocks, specifically for female connections with a wire cross section of 3.37 mm2 and one-way configuration.
8-796634-2
TE Connectivity's 8-796634-2 is a UL-approved BARRIER STRIP TERMINAL BLOCK with 21 ways. It supports wire gauge up to 12 AWG and rated voltage of 300V, handling current up to 15A. Ideal for applications requiring secure electrical connections in industrial settings.
1SNK705010R0000
Abb
MODULAR TERMINAL BLOCK; Mounting Type: DIN RAIL; Wire Gauge: 12 AWG; Voltage (Rated): 600 V; Current (Rated): 20 A; No. of Ways: 1;
2-520405-2
TE Connectivity 2-520405-2 is a UL-approved PUSH-ON TERMINAL for 18 AWG wire, rated at 600V. With 0.82 mm2 wire cross section, it's ideal for FEMALE terminals in various applications like automotive and industrial electronics.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MS25036-102
Amphenol Communications Solutions
RING TERMINAL; Additional Features: MATERIAL: COPPER; INSULATION: NYLON; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Wire Cross Section: 1.42 mm2; No. of Ways: 1;
RING TERMINAL; Additional Features: MATERIAL: COPPER; INSULATION: NYLON; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Safety Approval: UL; No. of Ways: 1;
MS-25036-102
Molex
Defense Logistics Agency
RING TERMINAL; Additional Features: MATERIAL: COPPER; INSULATION: NYLON; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Wire Cross Section: 1.42 mm2;
Panduit
RING TERMINAL; Additional Features: NYLON; Wire Gauge: 18 AWG; Voltage (Rated): 600 V; Safety Approval: CSA; UL; Wire Cross Section: 1.5 mm2;
MS25036-149
TE Connectivity's MS25036-149 is a CSA/UL approved FEMALE RING TERMINAL for 16 AWG wire with 300V rating. Ideal for applications requiring secure electrical connections in terminals & terminal blocks.
MS-25036-149
Molex MS-25036-149 is a CSA/UL approved RING TERMINAL for 16 AWG wire, rated at 300V. With a wire cross section of 1.31 mm2, it's ideal for female terminals in various electrical applications.
RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Safety Approval: CSA; UL; Terminal Gender: FEMALE;
RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Terminal Gender: FEMALE; No. of Ways: 1; Safety Approval: CSA; UL;
MS25036-101
RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Wire Cross Section: 1.42 mm2; Safety Approval: UL; No. of Ways: 1;
RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Wire Cross Section: 1.42 mm2; No. of Ways: 1; Safety Approval: UL;
MS-25036-101
RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Safety Approval: UL; Wire Cross Section: 1.42 mm2;
RING TERMINAL; Additional Features: NYLON; Wire Gauge: 18 AWG; Voltage (Rated): 600 V; Wire Cross Section: 1.5 mm2; Safety Approval: CSA; UL;
RING TERMINAL; Wire Gauge: 16 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Wire Cross Section: 1.42 mm2; No. of Ways: 1;
MS25036-154
RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Safety Approval: UL; Wire Cross Section: 2 mm2;
RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; No. of Ways: 1; Wire Cross Section: 2 mm2;
RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Safety Approval: UL; No. of Ways: 1;
MS-25036-154
Abb Installation Products
RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2 mm2; Safety Approval: UL;
RING TERMINAL; Additional Features: NYLON; Wire Gauge: 14 AWG; Voltage (Rated): 300 V; Wire Cross Section: 2 mm2; No. of Ways: 1;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved