Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 750VAC; No. of Connectors: ONE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Digiode
Corphita
Headers & Edge Type Connectors 90814-0834 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Board Mounting Option:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Insulation Resistance:
Insulator Color:
MIL Conformity:
Manufacturer Series:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
PCB Contact Row Spacing (mm):
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
90814-0834 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
STMicroelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Electronic Devices
2N2222A
Rectron
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
EU2B-YS3103F
Idec
ROTARY SWITCH;
LD1117S33TR
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
SMBJ18CA
Synsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
LIS2DH12TR
LIS2DH12TR by STMicroelectronics is a 3-axis accelerometer with digital voltage output. It operates b/w -40 to 85°C, with supply voltage range of 1.71-3.6V. Ideal for applications requiring precise motion sensing in compact spaces like wearables and IoT devices.
FDV303N
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
Diotec Semiconductor Ag
1N4148WS
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; No. of Elements: 1; Maximum Output Current: .2 A; Config: SINGLE;
DF11-18DS-2C
Hirose Electric
DF11-18DS-2C by Hirose Electric is a 2-row board connector with 18 contacts, rated at 2A signal current. It features a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 650VAC. Ideal for commercial applications requiring durable connectors with crimp termination and black insulator color.
09-50-3031
Molex
Molex 09-50-3031 is a board connector with 0.156" mating contact pitch, 0.464"x.25"x.625" body dimensions, and polyamide insulator material. It has 3 contacts, female gender, and bellowed type contact style for cable mounting applications. The UL-approved connector features a natural insulator color and locking mounting option for commercial reliability.
FTSH-107-01-L-DV-K-P-TR
Samtec
Samtec FTSH-107-01-L-DV-K-P-TR is a 14-contact board connector with 0.05" pitch, ideal for commercial applications. Features include liquid crystal polymer insulator, phosphor bronze contact material, and gold mating finish over nickel. With a temperature range of -55 to 125°C, it offers reliable signal current up to 3.3A.
B5P-VH(LF)(SN)
J S T Mfg
B5P-VH(LF)(SN) by J S T Mfg is a 5-contact BOARD CONNECTOR with 0.156" pitch, 1500VAC dielectric voltage, and 10A signal current. It features POLYAMIDE66 insulation, BRASS contacts with Tin finish, and operates b/w -25 to 85 °C. Ideal for PCB applications requiring high insulation resistance and UL94V-0 flammability rating.
B5B-ZR-SM4-TF(LF)(SN)
B5B-ZR-SM4-TF(LF)(SN) by J S T Mfg is a BOARD CONNECTOR with 0.059" pitch, 500VAC dielectric voltage, and 1A signal current rating. Ideal for PCB applications requiring POLARIZED HOUSING, this connector features BRASS contacts and POLYAMIDE6T insulation material.
B06B-PASK-1(LF)(SN)
B06B-PASK-1(LF)(SN) by J S T Mfg is a 6-contact board connector with 0.079" pitch, suitable for applications requiring a rated current of 3A. Featuring a dielectric voltage of 800VAC and insulation resistance of 1Gohm, it has a temperature range from -25 to 85°C, making it ideal for various electronic devices.
801-43-030-10-013000
Mill-max Mfg
The Mill-max Mfg 801-43-030-10-013000 is a board connector with 30 contacts, gold over nickel finish. It has a terminal pitch of 2.54mm and UL flammability code of 94V-0. Ideal for applications requiring reliable female socket connections on circuit boards.
DTM06-6S-E007
Deutsch
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE; Mounting Option-2: LOCKING;
22-28-4037
Molex 22-28-4037 is a board connector with 0.1" pitch, 3 contacts, and 4A signal rating. It features glass-filled polyamide insulation, tin contact finish, and operates b/w 0-75°C. Ideal for commercial applications requiring reliable connections in electronic devices.
71600-010LF
Amphenol Communications Solutions
71600-010LF by Amphenol is a board connector with 10 contacts, 2 rows, and a mating contact pitch of 0.1". It features an insulation resistance of 50G ohm, operates b/w -65 to 105°C, and has a durability of 100 cycles. Ideal for commercial applications requiring reliable signal connections in tight spaces.
BM04B-GHS-TBT(LF)(SN)(N)
BM04B-GHS-TBT(LF)(SN)(N) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, 0.049" pitch, and 100000000 ohm insulation resistance. It has POLYAMIDE9T insulator material, operates b/w -25 to 85 °C, and features TIN/CU termination finish. Ideal for applications requiring a male contact gender in surface mount configuration with a rectangular PCB contact pattern.
10152821-103Q000LF
Amphenol Communications Solutions' 10152821-103Q000LF is a card edge connector with 164 contacts, gold termination finish, and glass-filled polyamide insulator. It has a mating contact pitch of 0.039", operates b/w -55 to 105°C, and offers a rated current of 1.1A. Ideal for board mounting applications requiring durability and reliable signal transmission.
801-43-025-10-004000
801-43-025-10-004000 by Mill-max Mfg is a 25-contact board connector with matte tin finish. It has 2.54mm pitch, solder termination, and female contacts. Ideal for applications requiring straight mounting of socket-style connectors on boards.
BM04B-SRSS-TB(LF)(SN)(P)
BM04B-SRSS-TB(LF)(SN)(P) by J S T Mfg is a BOARD CONNECTOR with 4 contacts, COPPER ALLOY material, and TIN finish. It is used for surface mount applications in headers & edge type connectors. The connector has UL Flammability Code of 94V-0 and mating contact finish of TIN OVER COPPER.
B04B-PASK-1(LF)(SN)
B04B-PASK-1(LF)(SN) by J S T Mfg is a 4-contact board connector with 0.079" pitch, suitable for applications requiring a max operating temperature of 85°C. Featuring tin finish contacts and UL-rated insulation material, it offers high insulation resistance of 1000000000 ohm and dielectric voltage withstand of 800VAC. Ideal for PCB mounting with solder termination, this male connector has a contact resistance of 20 mohm and can handle up to 3A signal current.
TSW-103-07-T-D
Samtec's TSW-103-07-T-D is a 2-row, 6-contact board connector with a mating contact pitch of 0.1". Featuring matte tin finish and phosphor bronze contacts, it has a body width, depth, and terminal length of 0.1 inch each. Ideal for PCB applications requiring reliable male connectors with solder termination in a straight mounting style.
DF40C-90DS-0.4V(51)
DF40C-90DS-0.4V(51) by Hirose Electric is a 90-contact board stacking connector with gold termination, liquid crystal polymer insulator, and phosphor bronze contacts. It has a mating pitch of 0.016", withstands 100VAC, and operates b/w -35 to 85°C. Ideal for PCB applications requiring high durability and reliability in commercial settings.
50-57-9010
The Molex 50-57-9010 is a board connector with 10 contacts, 0.1" pitch, and 0.099" body width. It features glass-filled polyester insulator material and is UL94V-0 rated. Ideal for commercial applications requiring a reliable female SQ pin-skt contact style with crimp termination on cable mounting.
DF11-14DS-2C
DF11-14DS-2C by Hirose Electric is a 2-row, 14-contact board connector with a mating contact pitch of 0.079". Featuring TIN termination finish and polyamide insulator, it operates b/w -30°C to 85°C. Ideal for cable mounting applications, it offers a durability of 30 cycles and rated current of 2A for signal transmission.
SHR-07V-S-B
SHR-07V-S-B by J S T Mfg is a 1-row loaded board connector with 7 contacts. It has a UL flammability code of 94V-0 and uses crimp termination. This connector is commonly used in cable mounting applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved