Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF SMB/SSMB Connectors; Termination Contact Finish: GOLD NICKEL; Contact Material: NOT APPLICABLE; Mating Contact Finish: NOT APPLICABLE;
Median Price
$2.420
Lifecycle Status
Suppliers In-Stock
13
In-Stock Inventory
1k+
Verical
1+ parts
$2.270
100+ parts
-
1k+ parts
$2.190
10k+ parts
Mouser Electronics
$3.970
$3.180
$2.310
$2.150
Master Electronics
$2.060
$1.920
Newark
$3.040
$2.200
DigiKey
$2.570
$2.460
Chip1Stop
$3.270
$3.030
Farnell
$1.890
RS (Exports)
$2.234
$2.623
Vyrian
$2.110
Digiode
$2.945
ComSIT Distribution GmbH
IBS Electronics
$2.263
TME
$3.269
$2.796
Corphita
$2.790
Andel Nordic
$3.980
$3.820
Perfect Parts
Authorized Procurement Solutions
Assy Fe
SSMB Connectors 73404-0813 attributes and parameters. Explore more SSMB Connectors devices from Molex
Mating Contact Finish:
Termination Contact Finish:
Contact Material:
73404-0813 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
RC0402FR-0710KL
Yageo
Yageo's RC0402FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance, suitable for applications requiring a rated power dissipation of 0.0625 W. With a temperature coefficient of 100 ppm/°C, it operates b/w -55 to 155 °C, making it ideal for various electronic circuits.
2N2222A
Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
NE555D
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
M85049/85-08W02
TE Connectivity
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Wire Gauge (AWG): 0; Maximum Wire Size: 0 AWG; Maximum Operating Temperature: 175 Cel; Material: ALUMINUM ALLOY;
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Package Shape: RECTANGULAR; Minimum Input-Output Voltage Differential: 3 V;
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
SS14
Rfe International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Frontier Electronics
Taiwan Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
Lite-on Semiconductor
1N4148
Nexperia
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Supertex
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; No. of Elements: 1; Maximum Feedback Capacitance (Crss): 5 pF;
Semicoa
LM7805CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Package Body Material: PLASTIC/EPOXY; Maximum Load Regulation: .05 %;
142186
Amphenol
Amphenol's 142186 SSMB Connector features gold termination, snap coupling, and PTFE insulator. Ideal for RF applications, this female connector with crimp solder termination is designed for cable mounting in straight orientation.
2291392-3
TE Connectivity's 2291392-3 is an EMI shielded SSMB connector with dielectric voltage of 800VAC. With a characteristic impedance of 50 ohm, it operates up to 6 GHz. Ideal for RF applications, this right-angle SMB connector has a zinc alloy shell and solder termination.
FA1-NBRP-PCB-8
The Amphenol FA1-NBRP-PCB-8 is a RF SMB Connector with 50 ohm impedance, suitable for applications up to 6 GHz. Featuring a dielectric voltage of 1131VAC, gold contact finish, and PTFE insulator material, it ensures reliable performance in temperatures ranging from -65°C to 125°C. Ideal for board mounting with a snap coupling type, this connector offers durability of up to 100 cycles.
2FA1-NDSJ-C04-0
RF SMB CONNECTOR; Manufacturer Series: 2FA1;
R114.082.000
Radiall S A
Radiall S A's R114.082.000 is a RF SMB Connector with 50 ohm impedance, 0.5 dB insertion loss, and 1.41 VSWR. Ideal for applications requiring high durability, it features gold-plated contacts, PTFE insulator, and operates b/w -65 to 165 °C at frequencies up to 4 GHz.
414002-3
TE Connectivity's 414002-3 SSMB Connector features 0.25" body diameter, 1000000000 ohm insulation resistance, and 0.3 dB insertion loss. Ideal for RF applications with a max operating frequency of 4 GHz, this connector is designed for durability with a shell material of brass and termination type of crimp.
R114203000
Radiall S A's R114203000 is an RF SMB CONNECTOR with 50 ohm impedance, 0.25 dB insertion loss, and 1.33 VSWR. It features gold termination with nickel barrier, MIL and IEC conformity, suitable for applications up to 4 GHz requiring SNAP coupling on cables.
5414363-5
TE Connectivity's 5414363-5 RF SMB Connector has a body diameter of 0.25", insertion loss of 0.3 dB, and insulation resistance of 1e9 ohm. Ideal for applications requiring a durable right angle plug with characteristic impedance of 50 ohm, suitable for cables like RG 188, RG 174, and RG 316. Operating temperature ranges from -65 to 165 °C.
R115427000
Radiall S A's R115427000 RF SMB Connector has a characteristic impedance of 50 ohm, gold termination finish, and operates up to 4 GHz. Ideal for board mounting applications in industries requiring MIL and IEC conformity with female contact gender.
1-2345654-0
TE Connectivity 1-2345654-0 is a SSMB Connector with dimensions of 1.079" x 0.386" x 0.655". It has PBT-POLYESTER insulator, operates b/w -40 to 125°C, and features SMB connector type for cable mounting. Suitable for applications requiring polarized female connectors with crimp termination.
R114.163.000
R114.163.000 by Radiall S A is an RF SMB CONNECTOR with 1 dB Insertion Loss, GOLD OVER NICKEL Termination Contact Finish, and SNAP Coupling Type. It has a max operating frequency of 4 GHz and is ideal for applications requiring a 50 ohm characteristic impedance, such as cable mounting in right angle configurations.
903-289P-51A
Amphenol 903-289P-51A is a SSMB Connector with 0.3 dB Insertion Loss, GOLD Termination, and MIL Conformity. Ideal for RF applications up to 4 GHz, featuring POLYTETRAFLUORO ETHYLENE insulator and 50 ohm impedance. Suitable for cable mounting with SNAP coupling and RIGHT ANGLE plug style.
1-1337478-0
TE Connectivity 1-1337478-0 is a RF SMB connector with 50 ohm impedance, 0.6 dB insertion loss, and 4 GHz max operating frequency. Ideal for applications requiring high-frequency signal transmission in environments with temperatures ranging from -65 to 165 °C. Suitable for KX 22A and KX 3B cable types, featuring a right-angle mounting style.
142138
Amphenol 142138 is an RF SMB Connector with GOLD finish, POLYTETRAFLUOROETHYLENE insulator. It has SNAP coupling, suitable for BOARD mounting. Ideal for applications requiring reliable MALE contact in JACK body style.
131-3701-411
Cinch Connectivity Solutions
RF SMB CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Characteristic Impedance: 50 ohm; Termination Type: SOLDER; Mounting Style: STRAIGHT;
R114.203.000
The Radiall S A R114.203.000 SSMB Connector features 0.5 dB insertion loss, GOLD OVER NICKEL termination, and SNAP coupling type. With a 50 ohm impedance and 4 GHz operating frequency, it is ideal for RF applications requiring high-quality signal transmission in cable assemblies.
413990-1
TE Connectivity 413990-1 is a SSMB Connector with 0.25" body length, 1000000000 ohm insulation resistance, and 0.3 dB insertion loss. Ideal for RF applications up to 4 GHz, it features POLYTETRAFLUOROETHYLENE insulator material and BRASS shell material for durability.
1-413985-1
TE Connectivity's 1-413985-1 SSMB Connector features 0.3 dB Insertion Loss, PTFE Insulator, and SNAP Coupling. Ideal for RF applications with RG 179, RG 187, or RG 161 cables. Operating temperatures range from -65 to 165 °C with a max frequency of 4 GHz.
903-499J-51P2
Amphenol 903-499J-51P2 is a SSMB connector with 0.3 dB insertion loss, 50 ohm impedance, and 1400VAC dielectric voltage. Ideal for RF applications up to 4 GHz, it features gold-plated brass contacts and PTFE insulator for durability in commercial settings.
142210
Amphenol 142210 is a RF SMB Connector with gold finish, snap coupling, and PTFE insulator. It has 50 ohm impedance, solder termination, and female contact gender. Ideal for board and panel mounting in applications requiring reliable RF connections.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Molex
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved