Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
RF 2.4MM CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Characteristic Impedance: 50 ohm; Mounting Type: BOARD AND PANEL; Minimum Operating Temperature: -65 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Corphita
Other Function RF Connectors 73387-0023 attributes and parameters. Explore more Other Function RF Connectors devices from Molex
Body Width:
Body Depth:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Coupling Type:
Insulator Material:
Mounting Style:
Mounting Type:
Maximum Operating Frequency:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
Panel Mount:
Shell Material:
Termination Type:
Total No. of Contacts:
73387-0023 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603FR-071KL
Yageo
Yageo's RC0603FR-071KL is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in electronics, it operates b/w -55 to 155 °C with a temperature coefficient of 100 ppm/°C.
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
General Semiconductor
2N7002-7-F
Diodes Incorporated
Diodes Inc. 2N7002-7-F is a N-channel FET with 60V DS breakdown voltage, 0.115A max drain current, and 13.5 ohm RDS(on). Ideal for switching applications in enhancement mode operation. Features Gull Wing terminals, small outline package style, and operates up to 150°C.
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
Kingwell Technonlogy
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SN6505BDBVR
SN6505BDBVR by Texas Instruments is a small outline, low profile interface IC with 6 terminals. It operates b/w -55 to 125°C and supports a max output current of 1.5A at supply voltages ranging from 2.25V to 5.5V. Ideal for military-grade applications requiring compact design and high reliability.
Daco Semiconductor
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
LM317T
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
1055688-1
TE Connectivity
TE Connectivity's 1055688-1 RF SSMT CONNECTOR features a gold-plated contact finish with nickel barrier, SNAP coupling type, and polyphenylene sulfide insulator. With an insertion loss of 0.15 dB and VSWR of 1.4, it is ideal for applications requiring a durable male plug connector with a characteristic impedance of 50 ohm, operating up to 6 GHz.
PSMP-MSLD-PCS
Amphenol
PSMP-MSLD-PCS by Amphenol is a RF SMP CONNECTOR with 50 ohm impedance, 0.095 dB insertion loss, and 10 GHz max operating frequency. It is used in board mounting applications for high-frequency signal transmission due to its SNAP coupling type and POLYETHERETHERKETONE insulator material.
3287-6101
Sv Microwave
3287-6101 by Sv Microwave is a RF SMPM connector with characteristic impedance of 50 ohm, operating up to 20 GHz. Featuring a SNAP coupling type and gold shell finish, it is ideal for board mounting applications requiring high frequency performance. With male contact gender and right angle mounting style, this connector offers reliable signal transmission in various electronic systems.
20279-001E-03
I-pex
The I-pex 20279-001E-03 is a RF MHF connector with a body length of 0.102", body diameter of 0.079", and max operating frequency of 9 GHz. It is used for board mounting in applications requiring a characteristic impedance of 50 ohm, such as wireless communication systems.
2401
Pomona Electronics
Pomona Electronics' 2401 RF Connector features gold termination, bayonet coupling, and beryllium copper contact material. With a characteristic impedance of 50 ohm, it is ideal for solder termination in RF applications requiring female-female-male connectivity.
145-0701-601
Bel Fuse
Bel Fuse 145-0701-601 RF Connector features 0.06 dB insertion loss, 1400VAC dielectric voltage, and 50 ohm impedance. Ideal for commercial applications requiring a durable female coaxial jack with gold finish, suitable for panel mounting up to 40 GHz frequency.
R222152000
Radiall S A
The Radiall S A R222152000 RF SMP Connector features a low insertion loss of 0.76 dB and high VSWR of 1.35, suitable for applications up to 40 GHz. With gold-plated contacts and PTFE insulator, it offers reliable performance in temperatures ranging from -65°C to 105°C. Ideal for cable mounting with right-angle style, this connector is commonly used in RF communication systems.
CONUFL001-SMD-T
Linx Technologies
CONUFL001-SMD-T by Linx Technologies is a threaded RF connector with dimensions of 0.122" x 0.118" x 0.049". It operates b/w -40°C to 90°C, has a characteristic impedance of 50Ω, and supports frequencies up to 6 GHz. Ideal for surface mount applications in various electronic devices.
PL455ACFLS-222
Cinch Connectivity Solutions
RF TRK CONNECTOR; IEC Conformity: NO; DIN Conformance: NO; Mating Contact Finish: NICKEL; Termination Contact Finish: NICKEL; MIL Conformity: NO;
PL455ACWS-202
PL455ACWS-202 by Cinch Connectivity Solutions is a FEMALE CRIMP RF connector with STRAIGHT mounting style for CABLE termination. Featuring 0.002 GHz frequency, it's ideal for commercial applications requiring reliable COAX connections with LOCKING option.
131-0140-0001
Malco Microdot Uk
RF CONNECTOR; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; MIL Conformity: NO; Insulator Material: POLYTETRAFLUOROETHYLENE; Filter Feature: NO;
73116-0075
Molex
Molex 73116-0075 RF Connector features snap coupling, gold shell finish, and 50 ohm impedance. Ideal for cable mounting with right-angle male contact gender termination. Made of polybutylene terephthalate insulator material and phosphor bronze shell material.
82_MMBX-S50-0-13/111_NM
Huber+suhner Ag
82_MMBX-S50-0-13/111_NM RF connector by Huber+suhner Ag features a body length of 0.232", gold termination finish, and a max operating frequency of 12.4 GHz. It is designed for applications requiring a 50 ohm characteristic impedance, such as high-frequency communication systems or test equipment setups.
531-40047-3
Amphenol 531-40047-3 RF connector features threaded coupling, 75 ohm impedance, and 3 GHz frequency. Ideal for board mounting applications with female contact gender and right angle mounting style. Made of zinc shell material with polymethylpentene insulator for reliable performance in various RF connectivity setups.
5-1814822-1
TE Connectivity 5-1814822-1 is a RF F CONNECTOR with 75 ohm impedance, 700VAC dielectric voltage, and 50 cycles durability. Ideal for commercial applications at temperatures ranging from -55 to 85 °C, it features a 0.374" body diameter and NICKEL finish.
BJ159-47
Vertiv
Other RF Connectors; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1700VAC; Body or Shell Style: JACK; Mounting Style: STRAIGHT;
1621-60050
1621-60050 by Sv Microwave is a RF 2.4mm connector with threaded coupling, suitable for board mounting. Featuring a characteristic impedance of 50 ohm and a max operating frequency of 50 GHz, it is designed for high-frequency applications requiring reliable signal transmission in environments ranging from -65°C to 165°C.
142-1000-002
RF CONNECTOR; Option: HERMETIC; Contact Gender: MALE; Filter Feature: NO; Termination Contact Finish: GOLD (50) OVER NICKEL (5); IEC Conformity: NO;
GRF1-J-P-08-E-RA-TH1-E
Samtec
The Samtec GRF1-J-P-08-E-RA-TH1-E RF connector has 8 ports, gold-plated contacts, and a dielectric voltage of 700VAC. With a characteristic impedance of 50 ohm, it is ideal for commercial applications requiring high reliability and operating frequencies up to 6 GHz. The right-angle mounting style with solder termination makes it suitable for board mounting in various electronic devices.
H.FL-R-SMT(01)
Hirose Electric
H.FL-R-SMT(01) by Hirose Electric is a surface mount RF connector with 50 ohm impedance, 1.3 VSWR, and gold termination finish. Ideal for board mounting in commercial applications up to 3 GHz frequency range. Features include liquid crystal polymer insulator, snap coupling, and -40 to 90°C operating temperature range.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved