Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 73171-6611 is a BNC connector with panel mount capability. It has a body length of 0.394 inch, body diameter of 0.38 inch, and insertion loss of 0.5 dB. This RF BNC connector is commonly used in applications requiring a characteristic impedance of 75 ohm and a max operating frequency of 12 GHz.
Median Price
$13.400
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Verical
1+ parts
100+ parts
-
1k+ parts
$11.380
10k+ parts
$9.670
DigiKey
$26.700
$19.773
Element14
$37.490
$32.180
Newark
$51.030
$40.730
$39.530
Master Electronics
$10.720
$8.590
Powell Electronics
$11.450
$10.030
Farnell
Chip1Stop
$7.560
Nova Conductors
$11.800
Digiode
$17.984
TestEquity
$20.200
IBS Electronics
$13.226
$10.575
TME
$29.580
$25.150
VNN
Vyrian
Aztec Data Supply Inc.
$3.002
Andel Nordic
$6.396
$6.140
Semicontronic
$6.430
$6.269
$6.237
Netroflash
Corphita
$17.037
Continental Prestige Electronics
$39.050
$21.870
Argo Parts USA
Allows for easy installation and secure attachment to a panel or chassis.
Provides low signal loss, ensuring high quality signal transmission.
Bayonet coupling mechanism offers quick and secure connection between the connectors.
Matches the impedance of common coaxial cables, reducing signal reflections and maintaining signal integrity.
Supports high frequency signals, ideal for use in applications requiring high data rates.
BNC Connectors 73171-6611 attributes and parameters. Explore more BNC Connectors devices from Molex
Body Width:
Body Depth:
Body Diameter:
Body Length:
Body or Shell Style:
Characteristic Impedance:
Connector Type:
Contact Gender:
Contact Style:
Coupling Type:
Filter Feature:
Insertion Loss:
Insulator Material:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Ports:
Maximum Operating Frequency:
Option:
Panel Mount:
Reliability:
Shell Finish:
Shell Material:
Sub-Category:
Terminal Length:
Termination Type:
Total No. of Contacts:
Voltage Standing Wave Ratio:
73171-6611 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.10
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
BAV99
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BK,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Peak Reflow Temperature (C): 260; Additional Features: LOGIC LEVEL COMPATIBLE; Maximum Operating Temperature: 150 Cel;
2N2222A
Fairchild Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ABS06-32.768KHZ-T
Abracon
Abracon's ABS06-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 90000 ohm series resistance, and -40 to 85 °C operating temperature range. Ideal for applications requiring precise timing in compact designs like IoT devices and wearables.
1N4148WS
Onsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
OHN3140U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
Vishay Sprague
NPN; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JEDEC-95 Code: TO-18; Maximum Collector-Emitter Voltage: 40 V;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Transys Electronics
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Formosa Microsemi
SS14
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Harris Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
M39029/56351
Esterline Technologies
CONNECTOR ACCESSORY; IEC Conformity: NO; Contact Gender: FEMALE; DIN Conformity: NO; MIL-Connector Accessory Name: CONTACT; Tool Settings: M22520/2-10;
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
SMBJ18CA
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
M39012/16-0220
Delta Electronics Manufacturing
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: CABLE; Panel Mount: NO; Termination Type: CLAMP;
CPMC7818
Cinch Connectivity Solutions
CPMC7818 by Cinch Connectivity Solutions is a BNC Connector with gold termination, bayonet coupling, and polymethylpentene insulator. Ideal for RF applications up to 2 GHz, it features crimp/solder termination and 75 ohm impedance for male connectors on cables.
5227222-3
TE Connectivity
TE Connectivity's 5227222-3 BNC Connector features 0.581" body length, 0.2 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for RF applications with a max operating frequency of 4 GHz, this connector has a straight mounting style and is suitable for commercial use.
112538
Amphenol
Amphenol 112538 is a BNC connector with bayonet coupling, PBT insulator, and RF type. Ideal for board mounting, solder termination, and jack body style. Commonly used in RF applications for secure connections.
5414373-1
TE Connectivity's 5414373-1 BNC Connector has an insulation resistance of 5Gohm, body depth of 0.34", and operates at -55 to 85°C. Ideal for RF applications with a characteristic impedance of 50ohm, it features a bayonet coupling type and polymethylpentene insulator material.
031-10-RFXG1
Amphenol's 031-10-RFXG1 BNC Connector features Bayonet coupling, Polyamide insulator, and 50 ohm impedance. Ideal for RF applications up to 1 GHz, it supports both cable and panel mounting with solder termination for female contacts.
031-5329-51RFX
Amphenol's 031-5329-51RFX is a BNC connector with bayonet coupling, suitable for RF applications. Featuring a nickel-finished brass shell, it has a characteristic impedance of 50 ohm and can operate b/w -20°C to 165°C. With durability up to 500 cycles, this hermetic connector supports frequencies up to 4 GHz on boards with solder termination.
R141.082.161
Radiall S A
The Radiall S A R141.082.161 BNC Connector features 0.13 dB insertion loss, 1.22 VSWR, and 50 ohm impedance for RF applications up to 4 GHz. With gold over nickel termination, this bayonet-coupling connector is ideal for crimp termination on cables in male plug configuration.
2013
Ddk
RF BNC CONNECTOR; Contact Gender: FEMALE; Voltage Standing Wave Ratio: 1.3; MIL Conformity: NO; Panel Mount: NO; Manufacturer Series: BNC;
5-1634506-1
TE Connectivity's 5-1634506-1 BNC Connector features 50 ohm impedance, POLYMETHYLPENTENE insulator, and 4 GHz operating frequency. Ideal for RF applications, this connector has a durable zinc alloy shell with nickel finish and female coax contact gender.
112165
Amphenol 112165 is a BNC connector with gold termination, bayonet coupling, and acetal insulator. It is an RF connector for cable mounting with crimp termination. Ideal for applications requiring a female contact gender, plug body style, and right-angle mounting.
31-315-RFX
The Amphenol 31-315-RFX BNC Connector features a 0.571" body diameter, 0.2 dB insertion loss, and 5000000000 ohm insulation resistance. Ideal for RF applications up to 4 GHz, this connector has a bayonet coupling type and operates b/w -65°C to 165°C.
31-320-RFX
Amphenol 31-320-RFX is a BNC connector with 0.571" body diameter, 0.2 dB insertion loss, and 2100VAC dielectric voltage. Ideal for RF applications up to 4 GHz, it features bayonet coupling, PTFE insulator, and brass shell suitable for RG-58 cables.
034-1026-12G
RF BNC CONNECTOR; Contact Material: NOT SPECIFIED; Mating Contact Finish: NOT SPECIFIED;
112132RP
112132RP by Amphenol is a BNC connector with gold termination and bayonet coupling. It features PTFE insulator material, suitable for RF applications. This female crimp connector is ideal for cable mounting in straight configurations.
5227161-7
TE Connectivity's 5227161-7 BNC Connector features 0.3 dB insertion loss, 50 ohm impedance, and 4 GHz max operating frequency. Ideal for RF applications requiring a durable, right-angle panel mount connector with bayonet coupling.
112409
Amphenol's 112409 is a BNC Connector with gold termination, bayonet coupling, and polypropylene insulator. Ideal for RF applications, it features panel mount capability and solder termination for female contact gender in board and panel mounting configurations.
5221123-2
TE Connectivity's 5221123-2 BNC Connector features 50 ohm impedance, glass-filled PBT insulator, and 4 GHz operating frequency. Ideal for RF applications with a durability of 500 cycles, solder termination, and zinc alloy shell material.
112554
Amphenol 112554 is an RF BNC connector with gold termination and mating contact finish. Featuring bayonet coupling, it has a PTFE insulator for high performance. Ideal for board mounting applications requiring a female jack connector in straight orientation.
MP-13-10-1RG179
SPC TECHNOLOGY/ MULTICOMP
RF BNC CONNECTOR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
73171-1740
Molex
Molex 73171-1740 RF BNC Connector features 0.2 dB insertion loss, 50 ohm impedance, and 2.5 GHz operating frequency. Ideal for commercial applications requiring reliable board-mounted female connectors with nickel finish and PTFE insulator.
73171-2640
RF BNC Connectors; Mating Contact Finish: NOT APPLICABLE; Contact Material: NOT APPLICABLE;
73171-2741
RF BNC CONNECTOR; Reliability: COMMERCIAL; Termination Type: SURFACE MOUNT; Body or Shell Style: JACK; Contact Material: NOT SPECIFIED; Contact Style: COAX;
73171-0700
The Molex 73171-0700 RF BNC Connector features a body length of 0.577", insertion loss of 0.12 dB, and dielectric voltage withstand of 2100VAC. Ideal for applications requiring a durable right-angle receptacle with 75 ohm impedance, such as commercial-grade RF connections up to 4 GHz frequency.
73171-1900
RF BNC CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Body or Shell Style: JACK; Contact Style: COAX; Characteristic Impedance: 75 ohm;
73171-2600
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Termination Type: SOLDER; Characteristic Impedance: 75 ohm;
73171-3350
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Style: COAX; Terminal Length: .131 inch;
73174-0700
RF BNC CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: FEMALE; Contact Material: NOT SPECIFIED; Additional Features: SHIELDED;
73171-1360
Molex 73171-1360 is a BNC connector with panel mount, bayonet coupling, and 50 ohm impedance. Ideal for RF applications up to 4 GHz, it features a female coax contact and solder termination in a zinc alloy shell. Suitable for commercial use in board and panel mounting configurations.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved