Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: BRIGHT TIN OVER NICKEL; JESD-609 Code: e3; Mixed Contacts: NO;
Median Price
$1.240
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$1.010
1k+ parts
$0.770
10k+ parts
$0.533
Digiode
$1.168
-
Vyrian
$1.230
Corphita
$1.107
Andel Nordic
$2.664
$2.557
Headers & Edge Type Connectors 713085414 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
DIN Conformance:
Filter Feature:
IEC Conformity:
JESD-609 Code:
MIL Conformity:
Mixed Contacts:
Mounting Style:
Mounting Type:
No. of Rows Loaded:
Option:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
713085414 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
2N7002
Micro Commercial Components
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138PS,115
NXP Semiconductors
NXP Semiconductors' BSS138PS,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A max drain current. Ideal for switching applications, it features a 1.6 ohm max on-resistance and operates in enhancement mode. The transistor comes in a small outline package with GULL WING terminals, making it suitable for surface mount designs.
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
General Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Hitano Enterprise
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
ULN2803ADWG4
Texas Instruments
ULN2803ADWG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates at temperatures ranging from -40 to 85°C and has a max supply voltage of 3V. Ideal for applications requiring sink current flow direction in a small outline package style.
Onsemi
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
Bourns
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Terminals: 3; Maximum Drain Current (ID): .2 A; Operating Mode: ENHANCEMENT MODE;
3415
3m Electronic Products Division
CARD EDGE CONNECTOR; DIN Conformance: NO; IEC Conformity: NO; MIL Conformity: NO;
SSW-108-01-S-D
Samtec
SSW-108-01-S-D by Samtec is a 2-row, 16-contact board connector with a mating contact pitch of 0.1 inch. It features a liquid crystal polymer insulator and matte tin termination contact finish. This socket-style connector is commonly used in commercial applications requiring reliable connections on printed circuit boards.
746-016-520-606
Edac
Edac 746-016-520-606 is a 16-contact card edge connector with 0.125" pitch, suitable for PCB mounting. Featuring 3A signal current rating, it has a dielectric voltage of 1500VAC and operates b/w -40 to 105°C. Ideal for applications requiring high insulation resistance and UL94V-0 flammability compliance.
823-22-010-10-000101
Mill-max Mfg
823-22-010-10-000101 by Mill-max Mfg is a 2-row board stacking connector with gold over nickel termination. Featuring 10 contacts on a 2.54mm pitch, it is UL94V-0 rated for high flammability resistance. Ideal for board mounting applications requiring male solder contacts in straight orientation.
78171-0003
Molex
Molex 78171-0003 is a board connector with 0.047" pitch, 100M ohm insulation resistance, and 500VAC dielectric voltage. Ideal for commercial applications requiring a durable male plug with surface mount termination and black insulator color.
XF2M-3015-1A
Omron
Omron XF2M-3015-1A is a FFC/FPC connector with 30 contacts, gold termination finish, and 0.020" pitch. It has a durability of 20 cycles and operates b/w -30°C to 85°C. Ideal for board mounting applications requiring high reliability and signal currents up to 0.5A.
DT06-6S-CE05
TE Connectivity
The TE Connectivity DT06-6S-CE05 is a 2-row board connector with 6 contacts, rated for 13A signal current and 250V voltage. With a body length of 1.268", it features glass-filled polyamide insulation, operates b/w -55°C to 125°C, and has a durability of 100 cycles. Ideal for commercial applications requiring reliable connections in harsh environments.
746-060-520-601
Edac 746-060-520-601 is a CARD EDGE CONNECTOR with 60 contacts, rated at 3A signal current. It has a mating pitch of 0.125", insulation resistance of 5Gohm, and dielectric voltage rating of 1500VAC. Ideal for board mounting applications requiring high reliability in temperatures ranging from -40 to 105°C.
DTM06-2S-E007
TE Connectivity DTM06-2S-E007 is a 1.47" x 0.569" x 0.508" board connector with GLASS FILLED POLYAMIDE insulator, rated for 250V and 125°C. It has 2 contacts, UL 94V-0 flammability code, and supports up to 7.5A signal current. Ideal for cable mounting applications requiring polarized housing and strain relief.
50-57-9002
The Molex 50-57-9002 is a board connector with a mating contact pitch of 0.1". Featuring glass-filled polyester insulator, it operates b/w -40 to 105°C. With female SQ pin-skt contacts, it is ideal for commercial applications requiring a reliable rectangular contact pattern.
B6B-ZR(LF)(SN)
J S T Mfg
B6B-ZR(LF)(SN) by J S T Mfg is a 6-contact BOARD CONNECTOR with 0.059" pitch, GLASS FILLED POLYAMIDE66 insulator, and 500VAC dielectric voltage. It operates b/w -25 to 85 °C, suitable for applications requiring high insulation resistance and UL94V-0 flammability rating.
DT06-08SA-P012
Deutsch
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE; Mounting Type: CABLE;
SIM8066-6-1-14-01-A
Global Connector Technology
SIM8066-6-1-14-01-A by Global Connector Technology is a PCB connector with 2 rows, 6 contacts, and insulation resistance of 1000000000 ohm. It has a dielectric voltage of 500VAC, operates b/w -40 to 85 °C, and is ideal for applications requiring a durable female connector with right-angle mounting.
ASP-134488-01
Samtec ASP-134488-01 is a 10-row, 400-contact board connector with 0.05" pitch and liquid crystal polymer insulator. It features gold over nickel mating contacts, straight mounting style, and surface mount termination. Ideal for commercial applications requiring high-density connections on PCBs.
22-05-2071
Molex 22-05-2071 is a board connector with 7 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and termination contact finish in matte tin over nickel. It is used for PCB applications requiring durable connectors with a mounting style of right angle and solder termination type.
1473149-4
TE Connectivity's 1473149-4 is a CARD EDGE CONNECTOR with 200 contacts, POLYETHYLENE insulator, and 0.5A signal current rating. It has a mating contact pitch of 0.024", body length of 2.815", and operates b/w -55°C to 85°C. Ideal for board mounting applications requiring durable, right-angle female connectors with locking mechanism and UL94V-0 flammability rating.
02T-JWPF-VSLE-S
BOARD CONNECTOR; DIN Conformance: NO; Contact Material: NOT SPECIFIED; MIL Conformity: NO; IEC Conformity: NO; Mating Contact Finish: NOT SPECIFIED;
22-29-2061
The Molex 22-29-2061 is a board connector with 6 contacts, featuring a mating contact pitch of 0.1", insulation resistance of 1000000000 ohm, and rated current of 4A. It has a body length of 0.6", body width of 0.23", and operates b/w temperatures of 0 to 75°C. This connector is ideal for applications requiring reliable signal transmission on PCBs in commercial settings.
472192001
Molex 472192001 is a PCB connector with 0.043" mating contact pitch, 0.535" body length, and 100000000 ohm insulation resistance. It is used in applications requiring a durable, right angle mounting receptacle for commercial reliability.
SM10B-SRSS-TB(LF)(SN)
SM10B-SRSS-TB(LF)(SN) by J S T Mfg is a 10-contact board connector with 0.039" pitch, 100000000 ohm insulation resistance, and 500VAC dielectric voltage. Ideal for PCBs, it features tin over copper finish, POLYAMIDE insulator, and operates b/w -25 to 85 °C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved