Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
The Molex 53258-0829 is a board connector with 8 contacts, 0.138" pitch, and glass-filled PBT-Polyester insulator. It has a dielectric voltage of 1500VAC, operates b/w -40 to 105°C, and offers high durability for commercial applications.
Median Price
$1.010
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$0.440
100+ parts
-
1k+ parts
10k+ parts
Verical
$0.980
$0.940
Misumi USA
$1.650
DigiKey
$1.760
$0.845
Mouser Electronics
$1.870
$1.460
$1.210
$0.958
Master Electronics
$0.918
$0.877
Newark
$1.450
Farnell
$0.905
Powell Electronics
$0.880
Nova Conductors
$0.903
Digiode
$0.970
VNN
Vyrian
IBS Electronics
$1.136
$1.094
$1.052
CoreStaff
$0.241
$0.226
$0.225
Semicontronic
$0.429
$0.427
Aranea Global
$0.885
$0.850
Argo Parts USA
Continental Prestige Electronics
Corphita
$0.919
Aztec Data Supply Inc.
$5.438
Andel Nordic
$9.365
$8.990
Perfect Parts
Infinite Electronics LLP (Excess)
Kepictronics
Assy Fe
EMSNET (Excess)
Close contact pitch allows for high-density connections, making it suitable for applications requiring multiple connections in a limited space.
A standard body length that is suitable for a variety of applications, ensuring compatibility with different devices.
High insulation resistance helps prevent electrical leakage and ensures reliable performance.
A moderate body width that balances space constraints and ease of handling.
Capable of withstanding high voltage levels, providing safety and reliability in electrical connections.
Tin finish offers good conductivity and corrosion resistance, extending the lifespan of the connector.
Durable and heat-resistant material that provides excellent insulation and structural integrity.
Suitable for applications that require operation at higher temperatures, offering versatility in usage.
Wide temperature range ensures functionality in extreme environments, making it suitable for various applications.
Adequate plating thickness ensures good conductivity and resistance to wear and corrosion.
Designed for secure and stable connections on circuit boards, ensuring reliable signal transmission.
Meets strict flammability standards for safety, making it suitable for use in electronic devices.
Capable of carrying higher current loads, suitable for signal transmission in various electronic devices.
Provides multiple contact points for robust connections, suitable for applications requiring multiple signals.
Low contact resistance ensures efficient signal transmission and minimal power loss.
Headers & Edge Type Connectors 53258-0829 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Resistance:
Contact Style:
DIN Conformance:
Dielectric Withstanding Voltage (V):
Durability:
Filter Feature:
IEC Conformity:
Maximum Insertion Force (N):
Insulation Resistance:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Option-2:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Maximum Operating Temperature (Cel):
Minimum Operating Temperature:
Option:
PCB Contact Pattern:
Plating Thickness (inch):
Polarization Key:
Rated Current - Signal:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
Minimum Withdrawal Force (N):
53258-0829 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - 532580y29 Location 24/Jun/2020
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
2N7002
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .83 W; No. of Elements: 1; Transistor Application: SWITCHING;
SMBJ18CA
Forward International Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Nominal Breakdown Voltage: 21.05 V; Maximum Clamping Voltage: 29.2 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
EU2B-YS3103F
Idec
ROTARY SWITCH;
Crimson Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDC5614P
Onsemi
FDC5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 20A Max IDM and 0.105 ohm RDS(ON), operating in ENHANCEMENT MODE at -55 to 150 °C. This SMALL OUTLINE transistor has a built-in diode, GULL WING terminals, and METAL-OXIDE SEMICONDUCTOR technology.
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/56-351
Glenair
CONNECTOR ACCESSORY; Associated Backshell Military - Specifications: MIL-DTL-38999; Material: COPPER ALLOY; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: FEMALE; DIN Conformity: NO;
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
EU2B-YS2J03F
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
155222-2200-RA-WE
3m Electronic Products Division
3M Electronic Products Division's 155222-2200-RA-WE is a BOARD CONNECTOR with Matte Tin (Sn) finish. Featuring 22 contacts, it has GOLD (10) OVER NICKEL (50) mating finish. Ideal for surface mount applications with 2mm terminal pitch, this connector is UL 94V-0 rated.
TSW-103-07-T-S
Samtec
Samtec's TSW-103-07-T-S is a 3-contact board connector with a pitch of 0.1". It features a body size of 0.3" x 0.098" x 0.1", made of PBT insulator material, and operates b/w -55°C to 105°C. Ideal for commercial applications requiring reliable connections on PCBs.
43025-0800
Molex
The Molex 43025-0800 is a board connector with 8 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.506", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a reliable female connector with crimp termination and UL94V-0 flammability rating.
B2B-PH-K-S
J S T Mfg
B2B-PH-K-S by J S T Mfg is a BOARD CONNECTOR with BRASS contacts, 94V-0 UL rating, and TIN OVER COPPER finish. With 2 contacts on 2mm pitch, it's ideal for solder termination in straight mounting applications.
53261-0771
Molex 53261-0771 is a board connector with a mating contact pitch of 0.049". It has a body length of 0.531" and insulation resistance of 100000000 ohm. This connector is commonly used in commercial applications requiring a surface mount termination type.
22-05-3041
The Molex 22-05-3041 is a board connector with mating contact pitch of 0.1", body length of 0.4", and body width of 0.25". It features matte tin over nickel termination, brass contacts, and polyamide insulator material. Ideal for commercial applications requiring a reliable right angle mounting solution with rectangular contact pattern on PCBs.
045138008100858+
Kyocera
PCB CONNECTOR; Option: GENERAL PURPOSE; Mating Contact Finish: NOT SPECIFIED; DIN Conformance: NO; MIL Conformity: NO; Contact Material: NOT SPECIFIED;
VHR-4N-R
BOARD CONNECTOR;
66506-358LF
Amphenol Communications Solutions
Amphenol's 66506-358LF is a 20-contact, 2-row board connector with UL 94V-0 flammability rating. Featuring a terminal pitch of 2.54mm, it is solder terminated and male gendered. Ideal for applications requiring straight mounting style in headers & edge type connectors.
FTSH-105-01-L-DV-K
Samtec's FTSH-105-01-L-DV-K is a 2-row, 10-contact board connector with a mating contact pitch of 0.05". Featuring phosphor bronze contacts plated with gold over nickel, it operates b/w -55°C to 125°C. Ideal for commercial applications requiring a reliable, straight-mount male connector with surface mount termination.
SHF-105-01-L-D-SM-LC
The Samtec SHF-105-01-L-D-SM-LC is a 2-row, 10-contact board connector with Tin-Nickel finish. Featuring a terminal pitch of 1.27mm, it is designed for surface mount applications. Ideal for use in various electronic devices requiring male connectors with straight mounting style.
SSW-110-01-G-D
SSW-110-01-G-D by Samtec is a 2-row, 20-contact board connector with a mating contact pitch of 0.1". It features gold over nickel termination finish and liquid crystal polymer insulator material. Ideal for commercial applications requiring reliable socket connections on PCBs with a rectangular contact pattern.
22-05-2041
Molex 22-05-2041 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring POLYAMIDE insulator material, BRASS contact material, and Tin (Sn) - Nickel (Ni) termination finish, it offers high durability with 25 cycles. Ideal for commercial applications requiring a reliable connection in a compact form factor.
MTCB2X-206-XXXCS061
10152821-103Q000LF
Amphenol Communications Solutions' 10152821-103Q000LF is a card edge connector with 164 contacts, gold termination finish, and glass-filled polyamide insulator. It has a mating contact pitch of 0.039", operates b/w -55 to 105°C, and offers a rated current of 1.1A. Ideal for board mounting applications requiring durability and reliable signal transmission.
8-188275-0
TE Connectivity 8-188275-0 is a 2-row board connector with 10 contacts, rated for 1.5A signal current at 100V. Featuring a mating contact pitch of 0.05", it has a body length of 0.578" and insulation resistance of 1Gohm. Ideal for PCB applications requiring high reliability and operating temperatures from -40 to +105°C.
640456-4
Tyco Electronics Amp
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Style: STRAIGHT; Mounting Type: BOARD; Terminal Pitch (mm): 2.54;
ASP-134486-01
Samtec ASP-134486-01 is a 10-row, 400-contact board connector with 0.05" pitch and gold over nickel finish. It features liquid crystal polymer insulator, surface mount termination, and polarized housing for commercial applications requiring high reliability.
50-57-9007
The Molex 50-57-9007 is a board connector with 0.1" mating contact pitch, 0.099" body width, and 0.6" body depth. It has 7 female contacts with SQ pin-skt style for cable mounting applications. The UL 94V-0 rated connector is made of glass filled polyester and meets commercial reliability standards.
51021-0600
The Molex 51021-0600 is a board connector with 6 contacts, 0.049" pitch, and 353VAC voltage withstand. Ideal for commercial applications, it has a temperature range of -40 to 105°C and features crimp termination for durability in cable mounting setups.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
53253-0470
The Molex 53253-0470 is a board connector with a mating contact pitch of 0.079 inches and a body width of 0.144 inch. It features bright tin termination contact finish and is commonly used in commercial applications for its reliability and multiple mating parts availability.
53253-0370
Molex 53253-0370 is a board connector with 3 contacts, featuring a mating contact pitch of 0.079", bright tin termination finish, and brass contact material. It has a rectangular PCB contact pattern and is UL recognized with a flammability rating of 94V-0. Ideal for commercial applications requiring reliable connections on circuit boards.
53253-0270
Molex 53253-0270 is a board connector with 2 contacts, featuring bright tin finish and brass contact material. It has a mating pitch of 0.079" and body width of 0.144", suitable for PCB mounting applications requiring a polarized housing with UL flammability rating.
53254-0870
The Molex 53254-0870 is a board connector with 8 contacts, 2A signal current rating, and 30 cycles durability. Featuring a mating contact pitch of 0.079", it has a dielectric voltage of 700VAC and operates b/w -40°C to 105°C. Ideal for commercial applications requiring reliable right-angle mounting with solder termination.
53254-0270
Molex 53254-0270 is a board connector with 2A signal current rating, 30 cycles durability, and 700VAC dielectric voltage. Ideal for commercial applications requiring right-angle mounting on PCBs with rectangular contact pattern.
53253-0570
Molex 53253-0570 is a board connector with 5 contacts, featuring a mating contact pitch of 0.079" and body width of 0.144". It uses bright tin finish with nickel barrier, suitable for commercial applications requiring a polarized housing and UL standard compliance.
53254-0470
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 700VAC; No. of Connectors: ONE;
53254-1070
53253-0770
The Molex 53253-0770 is a board connector with 7 contacts, 2A signal current rating, and 0.079" mating pitch. It features a polyamide insulator, TIN contact finish, and operates b/w -40°C to 105°C. Ideal for commercial applications requiring a reliable polarized housing connector with UL certification.
53254-0370
53258-3002
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; MIL Conformity: NO; Filter Feature: NO; Mounting Style: STRAIGHT;
53258-0329
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; IEC Conformity: NO; DIN Conformance: NO; Termination Type: SOLDER;
53254-0670
53253-0670
Molex 53253-0670 is a board connector with 6 contacts, featuring brass contact material and polyamide insulator. With a mating pitch of 2mm, it operates b/w -40 to 105°C. Ideal for commercial applications requiring a polarized housing and solder termination on rectangular PCB patterns.
53258-0229
Molex 53258-0229 is a male board connector with 2 contacts, 0.358" body length, and 0.299" body width. It has a dielectric voltage of 1500VAC and insulation resistance of 1Gohm. Ideal for commercial applications requiring durable connectors with solder termination.
53258-3003
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier; DIN Conformance: NO; No. of Rows Loaded: 1;
53258-3008
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Mounting Type: BOARD; Filter Feature: NO; Terminal Pitch (mm): 3.5;
53258-0429
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Termination Type: SOLDER; Mounting Style: STRAIGHT; JESD-609 Code: e3;
53254-0770
53258-0828
BOARD CONNECTOR; Reliability: COMMERCIAL; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 1500VAC; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.138;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved