Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Molex 53047-1410 is a board connector with 14 contacts, 0.049" pitch, and TIN finish. It features a polarized housing, UL94V-0 rating, and solder termination. Ideal for commercial applications requiring a reliable straight mounting receptacle with locking option.
Median Price
$0.448
Lifecycle Status
Suppliers In-Stock
35
In-Stock Inventory
1k+
Distrelec
1+ parts
$0.391
100+ parts
-
1k+ parts
10k+ parts
Interstate Connecting
$0.415
$0.364
$0.328
Heilind Electronics
$0.458
$0.386
$0.363
Arrow
$0.724
$0.438
$0.366
Element14
$0.789
$0.774
$0.745
$0.704
Mouser Electronics
$0.790
$0.548
$0.464
$0.460
Chip1Stop
$3.110
$0.889
Adafruit Industries
$7.794
$7.404
TTI Europe
$0.428
$0.398
$0.346
DigiKey
$0.420
Farnell
$0.431
Master Electronics
$0.404
Verical
$0.280
Powell Electronics
$0.427
$0.355
Newark
$0.849
$0.705
$0.656
Digiode
$0.371
Nova Conductors
TestEquity
$0.490
TME
$0.650
$0.584
Rapid Electronics
$0.813
NAC Semi
$0.685
IBS Electronics
$0.508
$0.479
VNN
ComSIT Distribution GmbH
ACDS - Activité Composants Distribution Service
Vyrian
North Shore Components
Holdelec - ElecDif-Pro
LIBRA Elektronik GmbH
Bristol Electronics
Atlantic Semiconductor
First Choice Components Inc.
Prism Electronics
Semi Source
Specialty Parts & Electronic Components, Inc. (S.P.E.C.)
Semicontronic
$0.332
$0.324
$0.322
Corphita
$0.352
Argo Parts USA
$0.413
$0.401
Netroflash
Continental Prestige Electronics
$0.728
$0.403
Andel Nordic
$3.343
$3.209
Advanced Electronics
Aztec Data Supply Inc.
$8.247
Abacus Technologies
Perfect Parts
GreenTree Electronics
Glotronic Ltd.
Kepictronics
Assy Fe
Eastek
EMSNET (Excess)
The close pitch allows for efficient mating of contacts, ensuring a reliable connection.
The appropriate length of the body provides a sturdy structure for the connector.
The slim width allows for easy placement in compact spaces on the board.
The TIN finish ensures a secure and durable termination of contacts.
The depth of the body provides enough space for components without adding bulk.
The durable polyamide material of the insulator ensures long-lasting performance.
This type of connector is ideal for PCB applications, providing a secure connection.
The high flammability rating adds a layer of safety to the product.
The polarization key ensures correct mating of connectors, reducing the risk of damage.
The white color of the insulator provides a clean and professional look to the connector.
Meets industry standards for safety and performance.
The ample number of contacts allows for multiple connections in one unit.
Easy to use with single connection point.
Suitable for mounting on a circuit board for secure placement.
The terminal pitch of 1.25mm ensures compatibility with standard components.
The rectangular contact pattern provides a stable and secure connection on the board.
Solder termination provides a reliable and permanent connection.
Male contacts are commonly used for reliable and secure connections.
The receptacle style of the body allows for easy insertion and removal of contacts.
The straight mounting style provides a simple and efficient installation process.
The blade pin socket style ensures a secure and reliable connection.
The appropriate terminal length ensures compatibility with standard components.
The locking mounting option adds an extra layer of security to the connection.
Meets commercial standards for reliability and performance.
Headers & Edge Type Connectors 53047-1410 attributes and parameters. Explore more Headers & Edge Type Connectors devices from Molex
Additional Features:
Body Width:
Body Depth:
Body Length:
Body or Shell Style:
Connector Type:
Mating Contact Finish:
Termination Contact Finish:
Contact Gender:
Contact Material:
Contact Pattern:
Contact Style:
DIN Conformance:
Filter Feature:
IEC Conformity:
Insulator Color:
Insulator Material:
JESD-609 Code:
MIL Conformity:
Mating Contact Pitch (inch):
Mating Info.:
Mixed Contacts:
Mounting Option-1:
Mounting Style:
Mounting Type:
No. of Connectors:
No. of PCB Rows:
No. of Rows Loaded:
Option:
PCB Contact Pattern:
Polarization Key:
Reference Standard:
Reliability:
Sub-Category:
Terminal Length:
Terminal Pitch (mm):
Termination Type:
Total No. of Contacts:
UL Flammability Code:
53047-1410 Connectors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.69.40.40
SB
PCN Assembly/Origin - Mult Devs Supplier 11/Nov/2022
Molex LLC is a manufacturer of electronic, electrical, and fiber optic connectivity systems. Molex offers over 100,000 products across a variety of industries, including data communications, medical, industrial, automotive and consumer electronics. They are notable for pioneering the Molex connector, which has seen universal adoption in personal computing. The company is considered the second largest electronic connector company in the world. Molex was established in 1938 by Frederick Krehbiel. The company began by making flowerpots out of an industrial byproduct plastic called Molex. Krehbiel developed this material by combining asbestos tailings, coal tar pitch, and limestone. Aside from flower pots, Molex also sold salt shakers before it expanded into electrical connectors and sensors.Later they made connectors for General Electric and other appliance manufacturers out of the same plastic. Molex acquired Woodhead Industries in 2006; the largest acquisition in the former's history at the time.
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
BAV99
Panasonic
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138BKW,115
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Terminal Finish: TIN; No. of Terminals: 3; Additional Features: LOGIC LEVEL COMPATIBLE;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
Frontier Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
LL4148
Itt Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Electronic Transistors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1 V; Maximum Non Repetitive Peak Forward Current: .5 A; No. of Elements: 1; Maximum Reverse Recovery Time: .004 us;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
SS14
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sangdest Microelectronics (Nanjing)
Micro Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Philips Components
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
BM02B-GHS-TBT(LF)(SN)(N)
J S T Mfg
BM02B-GHS-TBT(LF)(SN)(N) by J S T Mfg is a 1-row, surface mount board connector with tin termination contact finish. It has 2 contacts and a terminal pitch of 1.25mm. This connector is commonly used in headers & edge type connectors for various applications.
22-27-2021
Molex
Molex 22-27-2021 is a board connector with 0.1" pitch, suitable for commercial applications. Featuring brass contacts with matte tin finish, it offers high durability with 25 cycles and insulation resistance of 1000000000 ohm. With a temperature range of 0-75°C, this white connector has a total of 2 contacts and is UL and CSA certified.
801-43-020-10-002000
Mill-max Mfg
801-43-020-10-002000 by Mill-max Mfg is a BOARD CONNECTOR with 20 contacts, featuring MATTE TIN OVER NICKEL finish. It has a terminal pitch of 2.54mm and uses SOLDER termination. Ideal for applications requiring FEMALE contact gender in STRAIGHT mounting style on a PCB.
M80-5401042
Harwin Plc
M80-5401042 by Harwin PLC is a 10-contact board connector with 0.079" mating contact pitch, suitable for PCB mounting with a temperature range of -55 to 125°C. Featuring tin finish contacts and glass-filled polyphenylene sulfide insulator, it offers high durability with 500 cycles and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable right-angle mounting in black color housing.
DF11-10DP-2DSA(01)
Hirose Electric
The Hirose Electric DF11-10DP-2DSA(01) is a 10-contact board connector with 0.079" pitch, suitable for commercial applications. Featuring gold over nickel termination finish, it offers high durability with 50 cycles and insulation resistance of 1Gohm. With a dielectric voltage rating of 650VAC, this connector is ideal for PCB mounting in various electronic devices.
G125-MS12005M1P
BOARD CONNECTOR; JESD-609 Code: e4; Contact Material: NOT SPECIFIED; Termination Contact Finish: Gold (Au); Mating Contact Finish: NOT SPECIFIED;
B06B-PASK-1
B06B-PASK-1 by J S T Mfg is a BOARD CONNECTOR with 6 contacts, made of COPPER ALLOY. It has Tin/Lead termination finish and 2mm terminal pitch for soldering. Ideal for applications requiring reliable male connectors in headers & edge type configurations.
22-28-4020
Molex 22-28-4020 is a board connector with 0.1" pitch, ideal for commercial applications. Featuring bright tin finish, it offers 25 cycles durability and 10 mohm contact resistance. With a rectangular PCB contact pattern and solder termination, this male connector has a total of 2 contacts in a black insulator body.
QSH-030-01-L-D-A-TR
Samtec
Samtec's QSH-030-01-L-D-A-TR is a 60-contact, 2-row stacking connector with 0.02" pitch. It features tin finish with nickel barrier, operates b/w -55°C to 125°C, and supports up to 1A signal current. Ideal for board-to-board applications requiring high reliability in commercial settings.
DT06-3S-P006
TE Connectivity
TE Connectivity's DT06-3S-P006 is a 3-contact board connector with GLASS FILLED POLYAMIDE insulator. Rated for 250V and 13A, it operates b/w -55 to 125 °C. Ideal for cable mounting applications, this UL-certified connector features a polarized design and measures 1.228" x 0.737" x 0.94".
851-47-053-10-002000
BOARD CONNECTOR; JESD-609 Code: e4; Mating Contact Finish: NOT SPECIFIED; Contact Material: NOT SPECIFIED; Termination Contact Finish: GOLD;
307-074-442-278
Edac
Edac 307-074-442-278 is a CARD EDGE CONNECTOR with 74 contacts, 0.156" pitch, and 5A signal rating. It has a dielectric voltage of 2545VAC, operates b/w -40 to 105°C, and features FEMALE contact gender for WIRE WRAP termination.
B10B-PHDSS(LF)(SN)
B10B-PHDSS(LF)(SN) by J S T Mfg is a 2-row BOARD CONNECTOR with 10 contacts, rated at 3A signal current. Featuring a mating contact pitch of 0.079", insulation resistance of 1Gohm, and dielectric voltage withstand of 800VAC, it is ideal for applications requiring reliable board-to-board connections in electronics.
22-01-3087
The Molex 22-01-3087 is a board connector with 0.1" mating contact pitch, suitable for headers & edge type connectors. Featuring a dielectric voltage of 700VAC and insulation resistance of 1Gohm, it operates b/w -40 to 105°C. With a removable contact block design, it has 8 contacts and is UL94V-0 rated for applications requiring durability and reliability in commercial settings.
22-03-5045
The Molex 22-03-5045 is a board connector with 4 contacts, featuring a mating contact pitch of 0.098", insulation resistance of 1Gohm, and operating temperature range from -40 to 105°C. Ideal for commercial applications requiring a durable, polarized housing with solder termination and UL94V-0 flammability rating.
70553-0002
Molex 70553-0002 is a board connector with 0.1" pitch, suitable for commercial applications. Features include matte tin over nickel finish, glass-filled polyester insulator, and operating temperature range of -40 to 105°C. Ideal for right-angle mounting on PCBs with rectangular contact pattern.
1-281742-0
TE Connectivity 1-281742-0 is a POLYETHYLENE insulator BOARD CONNECTOR with 20 contacts, rated at 3A. It has a polarization key and operates b/w -40 to 100 °C. The connector features tin termination finish, UL94V-0 flammability rating, and right angle mounting for various applications.
SHF-105-01-L-D-SM-LC-TR
BOARD CONNECTOR; JESD-609 Code: e3; Termination Contact Finish: Tin (Sn) - with Nickel (Ni) barrier;
ZHR-8
ZHR-8 by J S T Mfg is a board connector with 8 contacts, 0.059" pitch, and 500VAC dielectric voltage. It is ideal for applications requiring a polarized housing, such as cable mounting with crimp termination. With a temperature range of -25 to 85°C, it offers reliable performance in various environments.
BM03B-GHS-TBT(LF)(SN)(N)
BM03B-GHS-TBT(LF)(SN)(N) by J S T Mfg is a 3-contact BOARD CONNECTOR with Tin (Sn) finish. Made of Phosphor Bronze, it has 1.25mm terminal pitch for SURFACE MOUNT application on boards. UL Flammability Code: 94V-0, ideal for various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
53047-0410
Molex 53047-0410 is a board connector with 4 contacts, 1.25mm terminal pitch, and 0.09" terminal length. It features a polarized housing, solder termination, and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable rectangular PCB contact patterns.
53047-0610
The Molex 53047-0610 is a 6-contact, polarized housing board connector with a mating contact pitch of 0.049 inches. It has a body length of 0.364 inch and is made of polyamide. This connector is commonly used in commercial applications and can withstand temperatures ranging from -40 to 85°C.
53047-0210
Molex 53047-0210 is a board connector with 2 contacts, 1.25mm terminal pitch, and 0.049" mating contact pitch. Ideal for commercial applications requiring a polarized housing, solder termination, and UL94V-0 flammability rating.
53047-0310
Molex 53047-0310 is a board connector with 3 contacts, 1.25mm terminal pitch, and 0.049" mating contact pitch. It features tin termination finish, white polyamide insulator, and UL94V-0 flammability rating. Ideal for commercial applications requiring a polarized housing with rectangular PCB contact pattern.
53047-0510
Molex 53047-0510 is a board connector with 5 contacts, 1.25mm terminal pitch, and 0.09" terminal length. It features polarized housing, solder termination, and UL94V-0 flammability rating. Ideal for commercial applications requiring reliable rectangular PCB contact patterns.
53047-0810
Molex 53047-0810 is a 8-contact board connector with 0.049" pitch, POLYAMIDE insulator, and 0.463" body length. Ideal for commercial applications, it features polarized housing, UL 94V-0 flammability rating, and solder termination.
53048-0210
Molex 53048-0210 is a board connector with 2 contacts, 0.049" pitch, and TIN finish. It has a polyamide insulator, operates b/w -40 to 85°C, and features right-angle mounting. Ideal for commercial applications requiring reliable male connectors with rectangular contact pattern.
53048-0410
The Molex 53048-0410 is a board connector with 4 contacts, featuring a mating contact pitch of 0.049" and insulation resistance of 100M ohm. It has a right angle mounting style and solder termination type, suitable for commercial applications with operating temperatures ranging from -40°C to 85°C.
53048-0610
Molex 53048-0610 is a board connector with 6 contacts, featuring a mating contact pitch of 0.049" and insulation resistance of 100M ohm. Ideal for commercial applications, it has a right-angle mounting style and solder termination, operating b/w -40°C to 85°C.
53047-1010
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Style: BLADE PIN-SKT;
53047-0710
Molex 53047-0710 is a board connector with 7 contacts, 0.049" pitch, and TIN finish. It features POLYAMIDE insulator, UL 94V-0 flammability rating, and polarized housing. Ideal for commercial applications requiring reliable straight mounting with solder termination.
53048-0310
Molex 53048-0310 is a board connector with 3 contacts, 0.049" pitch, and TIN finish. Ideal for commercial applications, it has a temperature range of -40 to 85°C and insulator resistance of 100M ohm. The right-angle receptacle features solder termination and natural color polyamide insulation.
53048-0510
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Contact Pattern: RECTANGULAR;
53047-1210
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mounting Type: BOARD;
53048-1010
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Termination Contact Finish: NOT APPLICABLE;
53047-0910
The Molex 53047-0910 is a 1-row, 9-contact board connector with a mating contact pitch of 0.049 inches. It features a polarized housing and is suitable for commercial applications requiring reliable solder termination.
53048-0810
Molex 53048-0810 is a board connector with 8 contacts, featuring a mating contact pitch of 0.049" and insulation resistance of 100M ohm. Ideal for commercial applications, it has a right-angle mounting style and uses solder termination on a rectangular PCB contact pattern.
53047-1510
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; Mating Contact Pitch (inch): 0.049;
53048-0710
BOARD CONNECTOR; Option: GENERAL PURPOSE; Reliability: COMMERCIAL; Contact Gender: MALE; No. of Connectors: ONE; JESD-609 Code: e3;
530471470
BOARD CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: MALE; Dielectric Withstanding Voltage (V): 354VAC; No. of Connectors: ONE; Mounting Style: STRAIGHT;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved